Weathpack connectors for TPS

[steve ravet]

Tom Meagher wrote:

> The TPS is a GM style AC Delco unit, I'm pretty sure.  It has a 3 pin small
> "Weatherpack" style connector on it (I think).  The three pins are in a
> right triangle arrangement, and there is a little plastic prong on the side
> that must be lifted to separate it.  I can post a pic if necessary.
> 
> I want to insert a little box in series with this, so I'm looking for both
> polarities of this connector.
> 
> Does anyone know where I can find this stuff?  Should I post the very active
> GMECM list too, or would that be a faux pas? Thanks a bunch!

Posting to GMECM would probably be fine.  I used to buy weatherpack
connectors at the NAPA store on Jones road near Cypress N Houston.  NAPA
here in Austin doesn't stock them, although they could probably get
them.  Autozone has a few "weatherpack compatible" connectors, I think I
saw MAP and IAC there.  If you need a lot try waytek wire, if you only
need one you might try "white racing" at
http://members.aol.com/bigturbo1/index.html.  I haven't purchased from
him but it looks like he stocks lots of delphi packard stuff.  Getting
both genders might be a problem... maybe you could cut up a junkyard
TPS.

--steve


-- 
Steve Ravet
steve.ravet at arm.com
ARM,Inc.
www.arm.com
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org