May 2000 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon May 1 04:35:27 GMT 2000
Ending: Wed May 31 23:27:14 GMT 2000
Messages: 397

• Old 486 Board for ECU??   Mike from West Australia
• Old 486 Board for ECU??   Mike from West Australia
• Old 486 Board for ECU??   Mike from West Australia
• Old 486 Board for ECU??   Mike from West Australia
• Old 486 Board for ECU??   Mike from West Australia
• Old 486 Board for ECU??   Mike from West Australia
• Old 486 Board for ECU??   Mike from West Australia
• X86 for ECU   Mike from West Australia
• Old 486 Board for ECU??   Mike from West Australia
• Old 486 Board for ECU??   Mike from West Australia
• Turbo boost versus compression ratio ?   Mike from West Australia
• [OT] 60KVA UPS for sale in Australia   Mike from West Australia
• Delco controllers   Mike from West Australia
• Old 486 Board for ECU??   Mike from West Australia
• VSS question   John D. Bachman
• VSS question   John D. Bachman
• VSS Questions   John D. Bachman
• Dunnell Engines   Mike Blakey
• Dunnell Engines   Mike Blakey
• Newbie extends greetings   Neil Bradley
• Wow!   Neil Bradley
• Wow!   Neil Bradley
• pulse width / pulse granularity   Neil Bradley
• Old 486 Board for ECU??   Frederic Breitwieser
• Old 486 Board for ECU??   Frederic Breitwieser
• Thanks For all of Your Opinions   Frederic Breitwieser
• Old 486 Board for ECU??   Frederic Breitwieser
• Old 486 Board for ECU? Why?   Frederic Breitwieser
• Old 486 Board for ECU? Why?   Frederic Breitwieser
• Old 486 Board for ECU??   Frederic Breitwieser
• GB Z-80   Frederic Breitwieser
• GB Z-80   Frederic Breitwieser
• Old 486 Board for ECU? Why?   Frederic Breitwieser
• test bench was Re: Old 486 Board for ECU? Why?   Frederic Breitwieser
• Old 486 Board for ECU? Why?   Frederic Breitwieser
• test bench was Re: Old 486 Board for ECU? Why?   Frederic Breitwieser
• Old 486 Board for ECU? Why?   Frederic Breitwieser
• Old 486 Board for ECU? Why?   Frederic Breitwieser
• test bench was Re: Old 486 Board for ECU? Why?   Frederic Breitwieser
• test bench was Re: Old 486 Board for ECU? Why?   Frederic Breitwieser
• Old 486 Board for ECU? Why?   Frederic Breitwieser
• Problem in my PC-based EFI....   Frederic Breitwieser
• Free Data Acquisition Starter Kit   Frederic Breitwieser
• easy anti-lag system   Frederic Breitwieser
• Knock Sensor error   Buchholz, Steven
• injection conversion h*lp   Kelly Bumgarner
• injection conversion h*lp   Kelly Bumgarner
• Virus Warning   Todd Burkard
• Talon Question   Todd Burkard
• max fuel pressure on holley unit with 9psi of boost   Shane Buss
• No Subject   Shane Buss
•   Shane Buss
• Blower & enrichment   Shane Buss
•   Shane Buss
• Blower & enrichment   Shane Buss
•   Shane Buss
• Holley 4 Brrl gm ecm   Shane Buss
• Holley 4 Brrl gm ecm   Shane Buss
• Holley 4 Brrl gm ecm   Shane Buss
• Holley 4 Brrl gm ecm   Shane Buss
• Holley 4 Brrl gm ecm   Shane Buss
• Holley 4 Brrl gm ecm   Shane Buss
• Funny Oxygen Sensor Readings   John C.
• Dual TBI Setup?   Steve Cauffiel
• Dual TBI setup   Steve Cauffiel
• Turbo problems   Chad
• BMW efi...   Ade + Lamb Chop
• Stutter off of idle   Ade + Lamb Chop
• Mustang Fuel Rail Pressure Sensor   Chad Clendening
• easy anti-lag system   Chad Clendening
• DIY_EFI Digest V5 #188   Collister, Steve (S.)
• Old 486 Board for ECU??   Chris Conlon
• Turbo boost versus compression ratio ?   Chris Conlon
• Holley 4 Brrl gm ecm   Chris Conlon
• what (not) to use on fuel line fittings   Chris Conlon
• pulse width / pulse granularity   Chris Conlon
• Virus Warning   Matt Cramer
• Is this list still active.   J. Creech
• Ignition Timings   Tracy S. Cummings
• Funny Oxygen Sensor Readings   Bob Cunningham
• X86 for ECU   John Dammeyer
• Underhood temperatures.   John Dammeyer
• Underhood temperatures   John Dammeyer
• DIY_EFI Digest V5 #177   Hunt David
• Knock Sensor error   Hunt David
• Underhood Temperatures   Hunt David
• CSH, HQ closed for a few days   Doug Dayson
• what (not) to use on fuel line fittings   Doug Dayson
• Old 486 Board for ECU??   Diehl, Jeffrey
• Old 486 Board for ECU??   Diehl, Jeffrey
• Old 486 Board for ECU??   Diehl, Jeffrey
• Old 486 Board for ECU??   Diehl, Jeffrey
• Old 486 Board for ECU??   Diehl, Jeffrey
• Old 486 Board for ECU? Why?   Diehl, Jeffrey
• Old 486 Board for ECU??   Diehl, Jeffrey
• Crank Angle Sensor   Diehl, Jeffrey
• test, please ignore.   Diehl, Jeffrey
• test, please ignore.   Diehl, Jeffrey
• Old 486 Board for ECU? Why?   Diehl, Jeffrey
• Old 486 Board for ECU? Why?   Diehl, Jeffrey
• Old 486 Board for ECU? Why?   Diehl, Jeffrey
• Old 486 Board for ECU? Why?   Diehl, Jeffrey
• Crank Angle Sensor resolution - Re: Old 486 ..   Diehl, Jeffrey
• DIY_EFI Digest V5 #177   Diehl, Jeffrey
• Crank Angle Sensor resolution - Re: Old 486 ..   Diehl, Jeffrey
• Ignition Timings   Diehl, Jeffrey
• Dual TBI Setup?   Shannen Durphey
• Holley 4 Brrl gm ecm   Shannen Durphey
• Idle air with threaded port?   Shannen Durphey
• Holley 4 Brrl gm ecm   Shannen Durphey
• Code 43 on TPI   Shannen Durphey
• Underhood Temperatures   Shannen Durphey
• Underhood Temperatures   Shannen Durphey
• DIS coil source?   Shannen Durphey
• fuel pressure vs altitude   Flanagan, Stephen CECOM RDEC STCD
• fuel pressure vs altitude   Flanagan, Stephen CECOM RDEC STCD
• DirectScan "RAM Scan Tool"   Peter Gargano
• DirectScan "RAM Scan Tool"   Peter Gargano
• X86 for ECU   Peter Gargano
• Old 486 Board for ECU??   Peter Gargano
• Old 486 Board for ECU??   Peter Gargano
• Closed loop status   Peter Gargano
• Crank Angle Sensor resolution - Re: Old 486 ..   Peter Gargano
• Crank Angle Sensor resolution - Re: Old 486 ..   Peter Gargano
• Delco controllers   Peter Gargano
• Apologies   Peter Gargano
• Convert 6 cyl tacho for use with 4 cyl   Peter Gargano
• what (not) to use on fuel line fittings   Peter Gargano
• Thanks For all of Your Opinions   Gavin
• X86 for ECU   Gavin
• Free Data Acquisition Starter Kit   Gavin
• Old 486 Board for ECU??   Gavin
• Is this list still active.   Wallace A. Gustafson
• Crank Angle Sensor resolution - Re: Old 486 ..   John S. Gwynne
• Bosch LE/2 Jetronic (info and problems)   Christian Hack
• Virus Warning   Roger Heflin
• Turbo boost versus compression ratio ?   Greg Hermann
• MBE Systems ECU   Greg Hermann
• Free Data Acquisition Starter Kit   Greg Hermann
• what (not) to use on fuel line fittings   Greg Hermann
• what (not) to use on fuel line fittings   Greg Hermann
• what (not) to use on fuel line fittings   Greg Hermann
• pulse width / pulse granularity   Greg Hermann
• Old 486 Board for ECU??   Peter D. Hipson
• DIY_EFI Digest V5 #168   Peter D. Hipson
• DIS coil source?   Daniel Houlton
• Two questions: exhaust temp and the archives   Robert W. Hughes
• Injectors: P&H and SAT - DIY Flowbench   Andrew Hunter
• DIY Flowbench   Andrew Hunter
• Help on turbo app.   Jörgen Karlsson
• Help on turbo app.   Jörgen Karlsson
• Turbo boost versus compression ratio ?   Jörgen Karlsson
• Turbo boost versus compression ratio ?   Jörgen Karlsson
• easy anti-lag system   Jörgen Karlsson
• easy anti-lag   Jörgen Karlsson
• easy anti-lag   Jörgen Karlsson
• easy anti-lag   Jörgen Karlsson
• Tuning advice sought -   Jörgen Karlsson
• Tuning advice sought -   Jörgen Karlsson
• Old 486 Board for ECU??   Ludis Langens
• Crank Angle Sensor resolution - Re: Old 486 ..   Ludis Langens
• Turbo boost versus compression ratio ?   Jason Leone
• Flying Cow?   Rich M
• Bosch LE/2 Jetronic (info and problems)   Rich M
• Bosch LE/2 Jetronic (info and problems)   Rich M
• Bosch LE/2 Jetronic (info and problems)   Rich M
• Fuel Injector Connector - *the MALE side* ?   Rich M
• Fuel Injector Connector - *the MALE side* ?   Rich M
• Fuel Injector Connector - *the MALE side* ?   Rich M
• Idle air with threaded port?   Rich M
• VB923   Rich M
• Bosch LE/2 Jetronic (info and problems)   Rich M
• Bosch LE/2 Jetronic (info and problems)   Rich M
• Old 486 Board for ECU??   Matthew
• The Physics of Racing   Matthew
• Delco controllers   Matthew
• Power supply for PC in car   McMeikan, Andrew
• Weathpack connectors for TPS   Tom Meagher
• MBE Systems ECU   Tom Meagher
• TPS Style Connectors: Where to find?   Tom Meagher
• V to F   Tom Meagher
• rev limiter   Joel Mello
• Old 486 Board for ECU? Why?   MysticZ
• Erasing an EEPROM   MysticZ
• Mustang Fuel Rail Pressure Sensor   MysticZ
• Mustang Fuel Rail Pressure Sensor   Laura & Neil
• Holley 4 Brrl gm ecm   Laura & Neil
• test bench was Re: Old 486 Board for ECU? Why?   Tom Parker
• Ignition Timings   Corner Paul
• Dunnell Engines   Rene Pedersen
• what (not) to use on fuel line fittings   Gerald Pelnar
• Turbo boost versus compression ratio ?   Mike Pitts
• Closed loop status   Dan Plaskett
• Closed loop status   Dan Plaskett
• EPROM won't program correctly   Dan Plaskett
• Idle speed adjustment 89 F or Y body   Dan Plaskett
• Idle speed adjustment 89 F or Y body   Dan Plaskett
• Tuning advice sought -   Bruce Plecan
• what (not) to use on fuel line fittings   Bruce Plecan
• VB923   Bruce Plecan
• VB923   Bruce Plecan
• Wow!   Bruce Plecan
• crank position sensor   Programmer
• Virus Warning   Randall
• AW: easy anti-lag system   Rausch, Bernd
• Old 486 Board for ECU??   Axel Rietschin
• Old 486 Board for ECU??   Axel Rietschin
• Old 486 Board for ECU??   Axel Rietschin
• Old 486 Board for ECU??   Axel Rietschin
• Old 486 Board for ECU??   Axel Rietschin
• Old 486 Board for ECU??   Axel Rietschin
• Old 486 Board for ECU??   Axel Rietschin
• Old 486 Board for ECU??   Axel Rietschin
• Old 486 Board for ECU??   Axel Rietschin
• Old 486 Board for ECU??   Axel Rietschin
• EGOR Sneek Peek   Axel Rietschin
• ION Plugs   Romans, Mark
• Idle speed adjustment 89 F or Y body   Romans, Mark
• Bosch LE/2 Jetronic (info and problems)   Huw Scourfield
• Bosch LE/2 Jetronic (info and problems)   Huw Scourfield
• injection conversion h*lp   Chris Serrano
• Subject: Free Data Acquisition Starter Kit   Carter Shore
• FTP site   Simpson, James H
• Syclone tuning advice   Jim Sloan
• easy anti-lag   Byron Smith
• Underhood Temperatures   Byron Smith
• Problem in my PC-based EFI....   Socket7
• Bosch LE/2 Jetronic (info and problems)   Steve Spiers
• Bosch LE/2 Jetronic (info and problems)   Steve Spiers
• Bosch LE/2 Jetronic (info and problems)   Steve Spiers
• Free Data Acquisition Starter Kit   Carl Summers
• Free Data Acquisition Starter Kit   Carl Summers
• test, please ignore.   Swayze
• GB Z-80   Swayze
• GB Z-80   Swayze
• GB Z-80   Swayze
• GB Z-80   Swayze
• test bench was Re: Old 486 Board for ECU? Why?   Swayze
• test bench was Re: Old 486 Board for ECU? Why?   Swayze
• test bench was Re: Old 486 Board for ECU? Why?   Swayze
• test bench was Re: Old 486 Board for ECU? Why?   Swayze
• Two questions: exhaust temp and the archives   Swayze
• DIY_EFI Digest V5 #177   Swayze
• Knock Sensor error   Swayze
• Old 486 Board for ECU??   TK
• Old 486 Board for ECU? Why?   TK
• Help on turbo app. + EGT & AFT   Barry Tisdale
• Pulse widths & duty cycle   Barry Tisdale
• EFIlive & SyTys   Barry Tisdale
• Apologies   Barry Tisdale
• Tuning advice sought -   Barry Tisdale
• Tuning advice sought -   Barry Tisdale
• Tuning advice sought -   Barry Tisdale
• Virus Warning   Bob Tom
• MP microcontroller id?   Bob Tom
• Old 486 Board for ECU? Why?   Jim Tyler
• Old 486 Board for ECU? Why?   Jim Tyler
• DIY_EFI Digest V5 #187- Bosch LE/2 Jetronic (info and   Roderick Warner
• Idle air with threaded port?   Rex Weatherford
• Dual TBI Setup?   Dave Williams
• Help on turbo app.   Garfield Willis
• Old 486 Board for ECU??   Garfield Willis
• Old 486 Board for ECU??   Garfield Willis
• Old 486 Board for ECU??   Garfield Willis
• Help on turbo app. + EGT & AFT   Garfield Willis
• Mustang Fuel Rail Pressure Sensor   Garfield Willis
• fuel pressure vs altitude   Garfield Willis
• The Physics of Racing   Garfield Willis
• Mustang Fuel Rail Pressure Sensor   Garfield Willis
• Mustang Fuel Rail Pressure Sensor   Garfield Willis
• Flying Cow?   Garfield Willis
• Flying Cow?   Garfield Willis
• EGOR Sneek Peek   Garfield Willis
• SV: Flying Cow?   Garfield Willis
• EGOR Sneek Peek   Garfield Willis
• Fuel Injector Connector - *the MALE side* ?   Garfield Willis
• Nice Cheap Essential Tool for SMT work...   Garfield Willis
• Fuel Injector Connector - *the MALE side* ?   Garfield Willis
• CSH, HQ closed for a few days   Garfield Willis
• Holley 4 Brrl gm ecm   Garfield Willis
• Holley 4 Brrl gm ecm   Garfield Willis
• Holley 4 Brrl gm ecm   Garfield Willis
• (fwd) Injectors: P&H and SAT - Part 1   Garfield Willis
• Injectors: P&H and SAT - Part 2   Garfield Willis
• Injectors: P&H and SAT - Part 3   Garfield Willis
• DIY Flowbench   Garfield Willis
• Underhood Temperatures   Garfield Willis
• Underhood Temperatures   Garfield Willis
• Underhood Temperatures   Garfield Willis
• Underhood Temperatures   Garfield Willis
• Underhood Temperatures   Garfield Willis
• Underhood temperatures.   Garfield Willis
• Underhood Temperatures   Garfield Willis
• Tuning advice sought -   Garfield Willis
• Underhood temperatures   Garfield Willis
• Relativistic Fuel Injection   Garfield Willis
• what (not) to use on fuel line fittings   Garfield Willis
• what (not) to use on fuel line fittings   Garfield Willis
• what (not) to use on fuel line fittings   Garfield Willis
• DIY Flowbench   Garfield Willis
• Self programming ECU's?   Chris Wilson
• Free Data Acquisition Starter Kit   Jan Wännman
• Underhood Temperatures   Randall Young
• Two questions: exhaust temp and the archives   A70Duster at aol.com
• Epoxy   Bard382 at aol.com
• Turbo boost versus compression ratio ?   ECMnut at aol.com
• Epoxy   ECMnut at aol.com
•   ECMnut at aol.com
• Blower & enrichment   ECMnut at aol.com
• Blower & enrichment   ECMnut at aol.com
• Blower & enrichment   ECMnut at aol.com
•   ECMnut at aol.com
•   ECMnut at aol.com
• Holley 4 Brrl gm ecm   ECMnut at aol.com
• Holley 4 Brrl gm ecm   ECMnut at aol.com
• Holley 4 Brrl gm ecm   ECMnut at aol.com
• rev limiter   ECMnut at aol.com
• Holley 4 Brrl gm ecm   ECMnut at aol.com
• Tuning advice sought -   ECMnut at aol.com
• Tuning advice sought -   ECMnut at aol.com
• Tuning advice sought -   ECMnut at aol.com
• Tuning advice sought -   ECMnut at aol.com
• Tuning advice sought -   ECMnut at aol.com
• Tuning advice sought -   ECMnut at aol.com
• Funny Oxygen Sensor Readings   ECMnut at aol.com
• fuel pressure vs altitude   MdntRdr1 at aol.com
• Is this list still active.   MdntRdr1 at aol.com
• fuel pressure vs altitude   Moofaloof at aol.com
• Sound card DAQ (Was: test bench)   cbrooks1
• Idle air with threaded port?   clayb
• Idle air with threaded port?   clayb
• easy anti-lag system   dennis
• easy anti-lag   dennis
• easy anti-lag   dennis
• easy anti-lag   dennis
• easy anti-lag   dennis
• anti-lag links   dennis
• SV: Flying Cow?   espen hilde
• SV: SV: Flying Cow?   espen hilde
• 749 for sale   cwagner at info2000.net
• Flying Cow?   bernie at innovative.iinet.net.au
• Turbo problems   bernie at innovative.iinet.net.au
• Underhood Temperatures   bernie at innovative.iinet.net.au
• Underhood Temperatures   bernie at innovative.iinet.net.au
• Underhood Temperatures   bernie at innovative.iinet.net.au
• Underhood Temperatures   bernie at innovative.iinet.net.au
• Underhood Temperatures   bernie at innovative.iinet.net.au
• Underhood Temperatures   bernie at innovative.iinet.net.au
• Underhood Temperatures   bernie at innovative.iinet.net.au
• Underhood Temperatures   bernie at innovative.iinet.net.au
• Help on turbo app.   justin ivan
• Turbo problems   justin ivan
• Mustang Fuel Rail Pressure Sensor   kb4mxo
• Virus Warning   mark koenig
• The Physics of Racing   mark koenig
• Is this list still active.   krlux
• Dual TBI Setup?   nacelp
• Dual TBI Setup?   nacelp
• Dual TBI setup   nacelp
• max fuel pressure on holley unit with 9psi of boost   nacelp
• Old 486 Board for ECU??   nacelp
• DIY_EFI Digest V5 #177   nacelp
• Turbo boost versus compression ratio ?   nacelp
• fuel pressure vs altitude   nacelp
• Pulse widths & duty cycle   nacelp
• Pulse widths & duty cycle   nacelp
• Self programming ECU's?   nacelp
• Epoxy   nacelp
• Fuel Injector Connector - *the MALE side* ?   nacelp
• Fuel Injector Connector - *the MALE side* ?   nacelp
• Fuel Injector Connector - *the MALE side* ?   nacelp
• CSH, HQ closed for a few days   nacelp
•   nacelp
•   nacelp
• Blower & enrichment   nacelp
•   nacelp
• injection conversion h*lp   nacelp
• Holley 4 Brrl gm ecm   nacelp
• Holley 4 Brrl gm ecm   nacelp
• Holley 4 Brrl gm ecm   nacelp
• easy anti-lag   nacelp
• Ignition Timings   nacelp
• rev limiter   nacelp
• Tuning advice sought -   nacelp
• DIY_EFI Digest V5 #196   mike.hoenes at ncmail.net
• crank position sensor   brucep at ptd.net
• GB Z-80   steve ravet
• Problem in my PC-based EFI....   steve ravet
• Weathpack connectors for TPS   steve ravet
• TPS Style Connectors: Where to find?   steve ravet
• FTP site   steve ravet
• VB923   steve ravet
• Wow!   steve ravet
• Pulse widths & duty cycle   rr
• Is this list still active.   huw scourfield
• Triggering question   g.buckle at student.murdoch.edu.au
• EPROM won't program correctly   trax

Last message date: Wed May 31 23:27:14 GMT 2000
Archived on: Thu May 30 05:57:52 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...