Holley 4 Brrl gm ecm

[ECMnut at aol.com]

Which ECM did you use?
I tried different wiring setups with a 730 & Projection 900cfm TBI
last year, and finally gave up.  The injectors could be made accurate
and stable at idle, but 2k RPM was a bad thing..  It was either way rich
or way lean... The "real mechanical pulse widths" seemed to be very
unstable.  I'll try it with a 749 as soon as I get my hands on another
 big displacement engine.  My friend got impatient with my slow
"work for beer" approach to his BBC camaro show piece,
and paid someone with a dyno to put an electromotive system on it..  
Mike V
> Just to satisfy my own mind,
>  I wired up 2 TBI  P+H injectors in series, and fired up the ecm bench.
>  Batch fire v-8

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org