TPS Style Connectors: Where to find?

steve ravet sravet at arm.com
Mon May 15 18:12:48 GMT 2000


You've got the address wrong, diy_efi at diy-efi.org.

Did you see my replies about White Racing, NAPA, and Waytek Wire?

members.aol.com/bigturbo1
www.waytekwire.com

--steve

Tom Meagher wrote:
> 
> Hi all,
> Please forgive the somewhat off-topic post, but I can't get the
> DIY_EFI at lists.diy-efi.org listserver to respond properly.
> 
> I have a Polaris Victory motorcycle with a TPS that is a GM style AC Delco
> unit, (so I've been told).  It has a very small 3 pin "Weatherpack" style
> connector on it (I'm led to believe).  The three pins are in a triangular
> arrangement, and there is a little plastic tab on the side that must be
> lifted to separate it.  The mating connector receptacle is molded into the
> TPS housing itself.  Here are some pictures of the connector plug:
> 
> http://users.netropolis.net/tmeagher/Vic/TPS_connector.htm
> 
> I want to insert a little box in series with this to manually tweak the TPS
> setting, so I'm looking for both polarities of this connector, but I haven't
> had much luck at finding a source for them yet.  Does anyone know where I
> can get some of these connector pairs?
> 
> Any help would be mucho appreciated!
> 
> Thanks,
> Tom Meagher
> Houston TX
> 
> p.s.  I'm also trying to locate a copy of the "EasiMap" software for the MBE
> Systems model 60 ECM fitted to the bike ( www.mbesystems.com ), MBE has an
> agreement with Polaris not to sell the software to end users without
> explicit permission (I hate BS like that).  Any suggestions on this?
> 
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

-- 
Steve Ravet
steve.ravet at arm.com
ARM,Inc.
www.arm.com
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list