Blower & enrichment

[Shane Buss]

How do i know my max pulse reading?

i was using a holley 2bbl with 85# injectors... now i just put the 4bbl unit
and the blower on.. so i'm kind of starting from scratch here..

i do have the chip i used when i had 2 65# injectors..
----- Original Message -----
From: <ECMnut at aol.com>
To: <diy_efi at diy-efi.org>
Sent: Saturday, May 20, 2000 9:23 AM
Subject: Re: Blower & enrichment


> In a message dated 5/20/00 10:10:47 AM Eastern Daylight Time,
shaneb at ev1.net
> writes:
>
> >
> >  I have diacom, so i can get MAP readings etc... just curious what BPW
would
> >  be good to get going..
>
> I always get singled out for using crude fixes, but this could cost $0.
>  Depending on where your O2 & BPW numbers are at the present time,
> you might just be able to "fudge" things in the last collumn of the fuel
> table with some big values..  What are you max pulse reading at right now?
> Mike V
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org