SV: The Original DIY EGOR

Hasse-75 hasse-75 at telia.com
Thu Nov 2 18:23:52 GMT 2000


Hi

Sounds good to me.
Will the NTK be the only sensor it can be used with ?

Hasse
----- Original Message ----- 
From: Bruce Plecan <nacelp at bright.net>
To: <gmecm at diy-efi.org>; <diy_efi at diy-efi.org>
Sent: Thursday, November 02, 2000 4:32 PM
Subject: The Original DIY EGOR 


> 
> I did a rethink about where things are with the original DIY EGOR.
> I was hoping to release it as a finished set of plans, that about anyone
> could assemble.  Trouble is I have too many issues to get this done in a
> timely fashion,  I just don't have the energy to chase the loose ends
> around.
> 
> So, I'm going to edit some stuff, run the WB as much as possible in the next
> week-10 days and with some approvals needed release what I have.
> What you'll have is a none calibrated NTK WB, initially.   There are some
> pots, in the devise, for fine tuning it.  I'll record the voltages on what
> mine reads.
> Then the EEs can do what ever they want or not to finish up a display and or
> 0-1 ecm output.
> I'll just leave it to the person integrety of the list for who does what
> with the info., I just hope someone has enough class to help finish it off,
> and maybe even refine it.
> 
> My apologies that I didn't do this earlier, and beat the price increase on
> the sensor, just no way to forecast how things would go.
> 
> There is still room for snags, and it's a crap shot for how it works in mass
> useage, and Now it's a $200 guess on how things pan out.
> 
> What I hope it will offer is a reliable (meaning in duration of use, and
> results) Wide Band Sensor.  It's calibration my vary from unit to unit, but
> at least with in one application you'll know where you are, and exchanging
> some tuning info., will be meaningful.
> Bruce
> 
> 
> 
> 
> 
> 
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list