Bosch vs. other make injectors

[Erik Petersen]

Blown head gaskets cause crap to go everywhere and you lose the 14.7:1
a/f ratio. Does the Aurora also have a blown head gasket?

-erik

-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
Behalf Of Tom Sharpe
Sent: Thursday, November 02, 2000 6:55 PM
To: diy_efi at diy-efi.org
Subject: Re: Bosch vs. other make injectors


> While we are on the subject of injectors

I just have to chime in with several observations. I disassembled a 4L 6cyl
Jeep
w/60K miles and a blown head gasket. Replaced the warped head - the
injectors
were caked with crud like an old spark plug , got out the loop, dental picks
and
solvent and in 30 min. they looked OK. ran great.
Last week I put spark plugs in my 100K Aurora and pulled the injectors out
to
clean them up. They looked new - no crud - not even any varnish.  What gives
here? (It still gets 30MPG highway!)
 BTW, they have two pairs of holes pointed apart and they were held in
position,
left to right, by a clip which makes them point at the two intake valves.
TomS

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org