Ignition Only.

[John Dammeyer]

> Date: Fri, 10 Nov 2000 18:25:06 -0500
> From: Chris Conlon <synchris at ricochet.net>
> Subject: Re: Ignition only
>
> At 04:29 PM 11/10/00 -0500, Bruce Plecan wrote:
>
> >From: "James Ballenger" <vtjballeng at yifan.net>
>
> >> As an fictional example:
> >> Combustion side.  40,000V = 10000ohms*4amps
> >> Waste side 5,000V = 1,250ohms*4amps
> >> Same current passing through both of them... it is just like a
> >> series circuit with the voltage source in the center as I see it.  If
this
> >> is wrong, please tell me why.
> >
> >Ya, well meaning and good but.
> >Your trying to expalin things as a DCv,  and it's just not that way.
> >This has to "balance" on both sides, doesn't apply.
>
> No, he's right.

[Giant Snip of Chris's posting]

Good job Chris.  Excellent explanation and electrically correct!

John Dammeyer



----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org