DIY_EFI Digest V5 #385

[Barry Tisdale]

Thanks for the truly definitive answer, Chad.  There's bound to be more as
this project progresses.

Barry

At 10:22 AM 11/15/2000 -0600, Chad Clendening wrote:
>1) The regulator really needs to be a 8 volt variety.  Even with a good op
amp,
>the 5 volt regulator didn't have enough headroom.  The V+2.5 and -2.5 are
not the
>actual voltages present.  It was more like v+3 and v-5
>The artificial ground isn't evenly split since more negative current is
needed
>than positive current.
>
>2) The early data was taken with a earlier prototype and the I to V amp
was wired
>differantly.  It was taken as a meter was laying around doing nothing.
>
>Chad

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org