Autronic Questions

[Jeff Bromberger]

I have been looking at:

http://www.turbofast.com.au/autronic/analyzer.html

according to this, the Bosch 4-wire with the Model A analyzer is good from
10.0:1 - 36.0:1...

the main thing it appears to lose over the NTK UEGO is sensor speed. This
was the setup I was planning
on using (Model A + Bosch) in conjunction with the Autotune feature...

>
> No, the Bosch 4 wire is only good for closed-loop around 14.7. This is a
> worthwhile function, but don't expect to use it for tuning high load
> conditions. Exhaust temp is very good for tuning.
>

I was quoted a price of approx $300 for the boost valve from a US dealer.
I've since found it a lot cheaper overseas. :-)

> The boost controller works great. Closed-loop, mappable over temp and
> RPM. What do you mean by $300 option? It is built into the ECU. You do
> need a duty cycle valve, and wastegates, of course.
>


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org