350TPI Fuel Injectors

Sahli sahli at dashlink.com
Tue Sep 19 02:29:46 GMT 2000


Shannen,
This is Rich from Texas met you in NH. Well I'm scanning my 88 305 TPI with
DIACOM and I'm trying to figure out what areas have to be altered when I
install an supercharger. I realize that most of the fuel maps. Has anybody
had success programming their own chip for supercharger application, open to
all. Thanks
-----Original Message-----
From: Shannen Durphey <shannen at grolen.com>
To: diy_efi at diy-efi.org <diy_efi at diy-efi.org>
Date: Monday, September 18, 2000 8:41 PM
Subject: Re: 350TPI Fuel Injectors


>Well, I show a 17069647, which is 22 lbs/hr for the ZR1 Vette engine,
>a 5235047 which is for an 85 tpi 305, no specs (maybe 18 lbs/hr?), and
>a big injector for a Ford 460, which I'm sure isn't yours.  I hate to
>make any guesses about injector correctness, but they shouldn't be too
>far off if WOT seems ok.
>
>Did I mention disconnecting the O2 sensor and observing how the engine
>behaves?  This might better indicate an actual lean or rich
>condition...
>Shannen
>
>Don Burns wrote:
>>
>> Shannen,
>>
>> You asked about the injectors on this engine. With a magnifying glass and
a
>> twisted neck only a chiropractor could appreciate, I can read the last
two
>> digits which appear to be 47. The stuff in front of the 47 I can't read.
>> The injectors are black.
>>
>> I was vague befor on the ECM. Its a GM 1227730.
>>
>> Don
>>
>> -------------------------------------------------------------------------
---
>> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
>> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>---------------------------------------------------------------------------
-
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list