Adding a resistor to raise injector impedance - Comments?

[Robert Rauscher]

Nifty idea. This of course begs the question: How much
faster do they open at 24v vs. 12v? This is something
that I've been wanting to try with TBI PnH's. Just not
enough hours in the day. . .

BobR.

On Thu, 12 Apr 2001 08:30:32 -0400
 Ron Schroeder <rjs at bnl.gov> wrote:
> At 05:05 PM 4/11/01 -0400, you wrote:
> >Actually the 2.3A max peak will work for port PnH
> injectors. The CS452
> >peaks at 2.4 Amps. The TBI inj peak at 4A.
> >
> >BobR.
> 
> Hi Bob,
> 
> I am actually using it with saturation injectors.  Since
> my electrical
> system is 24V, I can hit them with about a 50% overdrive
> (small external
> series resistor) and then reduce it to about a 50%
> underdrive to prevent
> over-heating of the 12V injectors and get quicker on and
> off times.
> 
> Ron Schroeder
> WD8CDH
> E. E. S.
> wd8cdh at bnl.gov
> rjs at bnl.gov
> ron at 112motors.com
> 631 344-4561 Day
> 631 286-5677 Nite
> ----------------------------------------------------------------------------

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org