Peak and Hold

[Stewart Prince]

I finally found the part number for the Hitachi peak and hold injector driver.

HA13705
If anyone is interested, I'll FTP it to the diy site.
S. Prince

Ron Schroeder wrote:

> At 09:23 AM 4/12/01 -0400, you wrote:
> >
> >Nifty idea. This of course begs the question: How much
> >faster do they open at 24v vs. 12v? This is something
> >that I've been wanting to try with TBI PnH's. Just not
> >enough hours in the day. . .
> >
> >BobR.
>
> Hi Bob,
>
> In about 60% of the time but not only is the peak current higher but I am
> doing some compensation for the inductance to get a faster current rise
> time too.
>
> Ron Schroeder
> WD8CDH
> E. E. S.
> wd8cdh at bnl.gov
> rjs at bnl.gov
> ron at 112motors.com
> 631 344-4561 Day
> 631 286-5677 Nite
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

--
STEWART PRINCE

PROFESSOR, MECHANICAL ENGINEERING

CALIFORNIA STATE UNIVERSITY, NORTHRIDGE


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org