O2 / Lambda Sensor Data

[Bruce Plecan]

Why don't you read up on the subject matter and contribute something
intelligent?.
Bruce

From: "David Gregory" <dcg1174 at tntech.edu>
Subject: RE: O2 / Lambda Sensor Data


> gee, why don't you be a dick?

> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Bruce Plecan
> Sent: Thursday, April 26, 2001 8:06 AM
> To: diy_efi at diy-efi.org
> Subject: Re: O2 / Lambda Sensor Data
> > I come from an applied physics upbringing and I know 2 cars is not
ideal,
> > but it's better than 1!
> I fail to see where that is an excuse for giving out poor info..
>  As long as you keep the sensor roughly at the same
> > temperature for DIY use I think it's fine, it may not be absolute but it
> can
> > measure the presence of more of less fuel, even off stoichiometric. I
hope
> > to get a thermocouple in there soon to monitor the temperature.
>
> Might read further and see that backpressure can also play a role.
> Also, not all sensors switch over at .5v.
>
> > I wouldn't know how to read the plugs accurately and the only trouble is
> you
> > can't read the plugs while they are still in the engine :-) One
advantage
> I
> > didn't mention is that the WOT map curve isn't perfectly flat. I guess
it
> > takes into account the volume efficiency of the engine. The standard
curve
> > shape gave a wobbly mixture across the range(read from the mixture
meter),
> > we re-shaped the curve to give a constant mixture reading throughout the
> rev
> > range.
> >
> > I'll be the first to admit I don't know the ins and outs of engine
tuning.
>
> And you want to give advise?.
>
> > I'm just a evening hobbyist, but the car feels better now, and hopefully
> > will give a few more ponies at the rolling road (at 60quid a throw I
can't
> > afford to tune it on the rolling road itself, and besides it fun to have
a
> > go yourself)
>
> And remember, Buttometer readings are meaningless.
> Bruce
> >
> >
> > Will
> >
> > P.S. I've searched the archives, there is lots of info and I learnt a
lot,
> > without the people on the list I wouldn't have got to this stage, I just
> > thought I would put some hand on experience back.
> >
> > -----Original Message-----
> > From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> > Behalf Of Bruce Plecan
> > Sent: 25 April 2001 22:31
> > To: diy_efi at diy-efi.org
> > Subject: Re: O2 / Lambda Sensor Data
> > 2 cars is hardly enough to start making universal generalizations.
> > If you would care to read the archives you'll find out alot more about
> them.
> > If you repeated your experiments by reading the plugs you'd have saved
> more,
> > and been more accurate
> > Bruce
> >
> > <snip>


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org