Water Injection

[Bruce Plecan]

It is and does.

Vaporization is using the water to take heat out of the air, and that
requires time,
Atomization is for min detonation in the chamber, and means getting the
nozzles right by the intake valve.
Net results about the same more HP but, makes understanding what is going on
easier.
Bruce



From: "Raymond Brantley" <raymond at iwantperformance.net>
> Thanks Bruce and others for your responses. Bruce that's a hell of a
> tractor, must do well at the pulls ! As I understand it vaporization would
> pull heat from the combustion chamber right ? I'm a little unclear on
> atomization, would that create a cooler/denser air charge ?
> Hmmmmm, gotta do more reading :>)
> Raymond

> Behalf Of Bruce Plecan
> Subject: Re: Water Injection

> 436 IH, 60PSI of boost, 1/2 gal water in 30 secs..
> Instant death without it.
> High pressure, small orfices
> Need to play and see if you need it as atomization, or for vaporization.
> Takes time to get right.
> Bruce
>
>
> From: "Raymond Brantley" <raymond at iwantperformance.net>
> > I guess my questions are what are your experiences with water injection
?
> > What are the long term affects if any ? I have been looking at the
Spearco
> > kit and the Aquamist, but yikes the Aquamist is high $$$
> > Raymond


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org