DIY WB update

[Stephen Andersen]

I could be very interested in a group purchase.  I am 
an electronics doofus, but I think i could put something
together if I has the board, the parts, and instructions.

Anybody planning on organizing one?

Steve

Stephen M. Andersen, P.E.                              (302) 326-6405
Technical Director                                    FAX  (302) 326-6401
AdvanTek International, LLC                     Cell   (302) 547-9842
56 Read's Way                               andersen at Advan-Tek.com
New Castle, DE 19720


> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Bruce
> Sent: Friday, August 13, 1999 12:06 PM
> To: diy_efi at diy-efi.org; gmecm at diy-efi.org
> Subject: Re: DIY WB update
> 
> 
> 
> 
> DIY WB.
> Do It Yourself, Wide Band.
> This is meant to be TOTALLY NON-PROFIT,
> If someone/folks want to organize a group purchase (of 
> materials), fine.
> Other then that, hell no.
> A bunch of guys, have a ridiculous amount of hours invested 
> in this, and to
> let anyone capitialize on their backs, is flat insulting.   
> This effort was
> years in the making.   If anyone has a problem, understanding 
> this, write me
> off list, and I'll go over it in detail.
> Bruce
> 
> From: "Eric Fahlgren" <efahl at adams.com>
> Subject: Re: DIY WB update
> > rr wrote:
> > > I want to thank everyone that helped me with the DIY-WB
> > > design. Unfortunately I don't have the list of folks with
> > > me at the moment. So I'll post another thank you later
> > > today giving recognition to everyone on the team. This was
> > > truly a team effort! Note that this design is based on
> > > Chad's original work.
> > Bob et al,
> 
> > Yes, thanks very much for the effort, guys!  I hope it was fun.
> > > The package on the web site contains schematics, parts
> > > list, chip selection guide and contruction tips. I didn't
> 
> > Now if some industrious individual were to put together
> > a complimentary parts package (with or without sensor) to go
> > along with the board, I for one would be willing to pay a generous
> > surcharge just to avoid the hassle of doing it myself.  Anyone?
> > Eric
> 
> --------------------------------------------------------------
> --------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" 
> (without the quotes)
> in the body of a message (not the subject) to 
> majordomo at lists.diy-efi.org
> 
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org