August 2001 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Aug 1 01:30:32 GMT 2001
Ending: Fri Aug 31 21:51:13 GMT 2001
Messages: 539

• Hi i am new to the list and i have a cpl of ??'s   Brett Downs
• Water Injection Pics   Joseph Obernberger
• Data Logger Reccomendations?   David Hunt
• DIY-WB   Frank F Parker
• Maximum advance   Tom Sharpe
• aniline as octane booster?   Chris Conlon
• Maximum advance   944Technologist
• Data Logger Reccomendations?   Jason Haines
• aniline as octane booster?   Bruce
• Data Logger Reccomendations?   Walter Sherwin
• Hi i am new to the list and i have a cpl of ??'s   Brett Downs
• Data Logger Reccomendations?   Shane Moseley
• Logger Sampling Rate   Greg Hermann
• Oops! new poster and seller take 2!   Brett Downs
• Hi i am new to the list and i have a cpl of ??'s   Brett Downs
• Changing output of WB O2 setup (Autronic)   Jurgen Hartwig
• Changing output of WB O2 setup (Autronic)   Greg Hermann
• New poster and seller of some go fast goodies   Bill Shaw
• DIY-EGOR status   David Hunt
• DIY-EGOR status   steve ravet
• DIY-EGOR status   David Hunt
• DIY-EGOR status   Bob Wooten
• Mazda rotaries. Pre mix and octane reduction   Seth Bibler
• Mazda RX-7 '89-'91 MAF -> aftermarket hotwire?   Seth Bibler
• Mazda rotaries. Pre mix and octane reduction   Seth Bibler
• Changing output of WB O2 setup (Autronic)   Jörgen Karlsson
• Changing output of WB O2 setup (Autronic)   Jorgen Karlsson
• BMW Binaries   944Technologist
• Changing output of WB O2 setup (Autronic)   Brian L Massey
• Injectors in parallel & igntion signal processing   Tony Bryant
• FJO Inc. WBO2 (was Re: Changing output of WB O2 setup (Autronic))   NickG
• Changing output of WB O2 setup (Autronic)   Jörgen Karlsson
• Changing output of WB O2 setup (Autronic)   Glenn & Debbie Woodhouse
• Changing output of WB O2 setup (Autronic)   Neil.Poersch at mts.mb.ca
• Changing output of WB O2 setup (Autronic)   Jorgen Karlsson
• Changing output of WB O2 setup (Autronic)   Neil.Poersch at mts.mb.ca
• Pocket Programmer Info?   Ludis Langens
• Injectors in parallel & igntion signal processing   James Ballenger
• Pocket Programmer Info?   Kristopher Means
• Changing output of WB O2 setup (Autronic)   Glenn & Debbie Woodhouse
• pocket programmer!!!   Brett Downs
• safe distance from coil for ECU   Dave Edge
• safe distance from coil for ECU   Les Newell
• safe distance from coil for ECU   Dave Edge
• Chrysler EFI?   Peter Mao
• Chrysler EFI?   J. Creech
• Chrysler EFI?   Gerald Pelnar
• Chrysler EFI?   Greg Hermann
• Ign Advance on MR-2   Diehl, Jeffrey
• Chrysler EFI?   Peter Mao
• Ign Advance on MR-2   Les Newell
• HD6303 Manual?   Peter Gargano
• What now?   Morten T Nielsen
• HD6303 Manual?   Watson E. Watson
• newbie interested in the wb-egor   Xin
• newbie interested in the wb-egor   Jess Gypin
• Ign Advance on MR-2   lance
• Ign Advance on MR-2   Chris Conlon
• HD6303 Manual?   Peter Gargano
• What now?   Bob Wooten
• Ign Advance on MR-2   Joseph Obernberger
• What now?   ChiefZ28 at cs.com
• Ign Advance on MR-2   Diehl, Jeffrey
• Ign Advance on MR-2   Diehl, Jeffrey
• Ign Advance on MR-2   Diehl, Jeffrey
• Ign Advance on MR-2   Diehl, Jeffrey
• Ign Advance on MR-2   Rich M
• Ign Advance on MR-2   Chris Conlon
• Ign Advance on MR-2   Lasse Langwadt Christensen
• Ign Advance on MR-2   Les Newell
• What now?   Morten T Nielsen
• Ign Advance on MR-2   Rich M
• Ign Advance on MR-2   Bruce
• Ign Advance on MR-2   Les Newell
• Ign Advance on MR-2   Joseph Obernberger
• CAN-bus   Arnaud Westenberg
• DIY WB update   steve ravet
• Ign Advance on MR-2   Ron Schroeder
• DIY WB update   rr
• DIY WB update   Eric Fahlgren
• DIY WB update   Bruce
• DIY WB update   Eric Fahlgren
• Non EFI, sort of.   Barry Tisdale
• DIY WB update   Stephen Andersen
• DIY WB update   rr
• Non EFI, sort of.   Eric Fahlgren
• CAN-bus   Jens Knickmeyer
• DIY WB update   Steven Ciciora
• Non EFI, sort of.   Bruce
• Non EFI, sort of.   Flanagan, Steve
• DIY WB update   justin ivan
• Non EFI, sort of.   Jon
• Non EFI, sort of.   Raymond Brantley
• Non EFI, sort of.   Rich M
• DIY WB explanation   Onebil2mny at aol.com
• DIY-WB design team   rr
• Non EFI, sort of.   Dave Williams
• Non EFI, sort of.   Greg Hermann
• Non EFI, sort of.   dom_ at mac.com
• CAN-bus   Arnaud Westenberg
• DIY WB update   Barry Tisdale
• Recall: DIY_EFI Digest V5 #696   Glenn & Debbie Woodhouse
• Ignition Current Limit   Brian Lewis
• DIY WB update   Stephen Andersen
• DIY_EFI Digest V5 #696   Andrew Theurer
• Non EFI, sort of.   Phil Hunter
• Fwd: Wideband Boards Order Status Update   rr
• Australian Wideband Boards   Peter Gargano
• DIY WB update   Jeff Bromberger
• Australian NTK/NGK sensor purchase   Peter Gargano
• Australian NTK/NGK sensor purchase   Daniel
• Australian NTK/NGK sensor purchase   Peter Gargano
• Orcad --> Protel?   Peter Gargano
• Ignition Current Limit   Les Newell
• Orcad --> Protel?   Les Newell
• Kits for WBO2   Flanagan, Steve
• Kits for WBO2   Bruce
• Orcad --> Protel?   Matt Henson
• Kits for WBO2   Eric Fahlgren
• Kits for WBO2   Flanagan, Steve
• Orcad --> Protel?   Jess Gypin
• Non EFI, sort of.   Eric Fahlgren
• Kits for WBO2   Jeff Bromberger
• Australian NTK/NGK sensor purchase   Phil Lamovie
• Kits for WBO2   Jörgen Karlsson
• Orcad --> Protel?   rr
• Orcad --> Protel?   Jess Gypin
• Orcad --> Protel?   rr
• Orcad --> Protel?   steve ravet
• Kits for WBO2   Barry Tisdale
• Australian NTK/NGK sensor purchase   Peter Gargano
• WBO2 sensor clarification   Flanagan, Steve
• WBO2 sensor clarification   Bruce
• WBO2 sensor clarification   syko at nmia.com
• WBO2 sensor clarification   Cosby, Melvin C. (GEL, MSX)
• WBO2 sensor clarification   Bruce
• WBO2 sensor clarification   rr
• Narrow band sensor info on /incoming   Peter Gargano
• EFI POWWOW Dates   Bruce
• EFI POWWOW Dates   Bruce
• Test of DIY-WB   rr
• V6 Vortec to V8 Vortec Conversion   JANETSKY, ALBERT (AIT)
• Batch EFI on Siamesed Port Motors   Peter Gargano
• Batch EFI on Siamesed Port Motors   Bruce
• [Fwd: Test of DIY-WB]   rr
• Batch EFI on Siamesed Port Motors   marcel chichak
• where to get "weatherpack" connectors?   Jeff Bromberger
• where to get "weatherpack" connectors?   steve ravet
• where to get "weatherpack" connectors?   ed murder
• [Fwd: DIY-WB boards 2nd batch INFO]   rr
• where to get "weatherpack" connectors?   Jeff Bromberger
• Test of DIY-WB   rr
• Batch EFI on Siamesed Port Motors   Carter Shore
• Chevy Blazer 4.3 binary file needed   mike.hoenes at ncmail.net
• Pic of DIY-WB sensor   rr
• Mercury to Mopar TBI swap?   Matt Cramer
• Batch EFI on Siamesed Port Motors   Peter Gargano
• WB O2 Circuit Comments   Timothy J Burgess
• Toyota Automotive Connectors   Nicholas Parker
• WB O2 Circuit Comments   rr
• building boards   Steve
• building boards   Bruce
• Kits for WBO2   Camden Lindsay
• Australian DIY-WB group buy status   Peter Gargano
• No Subject   Warwick Anderson
• building boards   David Hunt
• building boards   David Chambers
• building boards   Bruce
• building boards   Bruce
• Air flow meter   Matt Cramer
•   Bruce
• Air flow meter   Bruce
• Air flow meter   Chris Waltham
• Air flow meter   Daniel
• Toyota Connectors   Scott_Hay at toyota.com
• Dissassembling BINS   Michael Humphries Woodworking
• Toyota Connectors   Mark Agnello
• Toyota Connectors   Chris Conlon
• WB O2 Circuit Comments   Brian Renegar
• Dissassembling BINS   Jeff Bromberger
• Dissassembling BINS   Peter Gargano
• building boards   David Hunt
• Air flow meter   Warwick Anderson
• Air flow meter   Dan Zorde
• Injector info wanted   Shannen Durphey
• Air flow meter   Chris Waltham
• Air flow meter   Shannen Durphey
• More details: Injector info wanted   Shannen Durphey
• Air flow meter   Shannen Durphey
• building boards   Josh Ely
• building boards   Bruce
• Air flow meter   Daniel
• DIY_EFI Digest V5 #704   Dan Zorde
• Toyota Connectors   lance
• Fwd: UPDATE DIY Wideband Boards 2nd batch   rr
• Air flow meter   Matt Cramer
• WB O2 Circuit Comments   Camden Lindsay
• building boards   Camden Lindsay
• NTK UEGO calibration   Rausch, Bernd
• building boards   Kelly McCrystle
• building boards   steve ravet
• NTK UEGO calibration   Axel Rietschin
• NTK UEGO calibration   Neil.Poersch at mts.mb.ca
• Toyota Connectors   Scott_Hay at toyota.com
• DIY_EFI Digest V5 #704   Scott_Hay at toyota.com
• Digijet - Digifant   Morten T Nielsen
• NTK UEGO calibration   Bruce
• NTK UEGO calibration   Neil.Poersch at mts.mb.ca
• AW: NTK UEGO calibration   Rausch, Bernd
• building boards   David Hunt
• NTK UEGO calibration   David Hunt
• building boards   Josh Ely
• NTK UEGO calibration   Barry Tisdale
• NTK UEGO calibration   Neil.Poersch at mts.mb.ca
• NTK UEGO calibration   Flanagan, Steve
• building boards   David Hunt
• building boards   Bruce
• building boards   Bruce
• NTK UEGO calibration   Bruce
• building boards   Bruce
• NTK O2 sensor connector   NickG
• Hi Tech shootout for east coast of Australia   Warwick Anderson
• Cosworth IAW fuel/ign map locations   rsrich at cwcom.net
• NTK O2 sensor connector   Bruce
• building boards   Josh Ely
• Dissassembling BINS   Christian Hack
• NTK UEGO calibration   Barry Tisdale
• Toyota Connectors   Mark Agnello
• building boards   Bob Wooten
• building boards   Bruce
• Dissassembling BINS   Bruce
• building boards   Bob Wooten
• Dissassembling BINS   Peter Gargano
• building boards   Bruce
• Dissassembling BINS   Peter Gargano
• building boards   Gabe
• building boards   Rich M
• Ign Advance on MR-2   Diehl, Jeffrey
• Toyota Connectors   Chris Wilson
• Ign Advance on MR-2   Diehl, Jeffrey
• NTK UEGO calibration   Jason Haines
• AW: building boards   Rausch, Bernd
• Toyota Connectors   Rich M
• Ign Advance on MR-2   Les Newell
• diy_wb parts list available   steve ravet
• Ign Advance on MR-2   Programmer
• diy_wb parts list available   Brian Renegar
• DIY-WB Parts Kit orders   Steven Ciciora
• Ign Advance on MR-2   Diehl, Jeffrey
• Ign Advance on MR-2   Bruce
• diy_wb parts list available   rr
• Ign Advance on MR-2   Camden Lindsay
• More details: Injector info wanted   Camden Lindsay
• DIY-WB Parts Kit orders   Brian Renegar
• Ign Advance on MR-2   Bruce
• Ign Advance on MR-2   Diehl, Jeffrey
• Ign Advance on MR-2   Diehl, Jeffrey
• Ign Advance on MR-2   Diehl, Jeffrey
• Ign Advance on MR-2   Camden Lindsay
• Ign Advance on MR-2   Camden Lindsay
• NTK UEGO calibration   Axel Rietschin
• calibration test gas mixtures [was Re: NTK UEGO calibration]   Jason Haines
• Dissassembling BINS   Christian Hack
• Dissassembling BINS   lance
• Electromagneticly clutched supercharger with natural aspiration bypass.   Julia Wakeling
• Electromagneticly clutched supercharger with natural aspiration bypass.   Morten T Nielsen
• Dissassembling BINS   Andrew R. Ghali
• calibration test gas mixtures [was Re: NTK UEGO calibration]   Greg Hermann
• Saturn will roll out continuously variable transmission (CVT)   Marc Randolph
• Digijet - Digifant   Jens Knickmeyer
• Ign Advance on MR-2   David Hunt
• Ign Advance on MR-2   David Hunt
• calibration test gas mixtures [was Re: NTK UEGO calibration]   David Hunt
• AW: building boards   Rausch, Bernd
• Digijet - Digifant   David Hunt
• Digijet - Digifant   Peter Gargano
• wideband O2   Barry C. Forrest
• Digijet - Digifant   Bernd Felsche
• Fuel octane question   Chris Wilson
• AW: building boards   Moofaloof at aol.com
• Digijet - Digifant   Peter Gargano
• Converting my motorcycle to EFI   Mauricio Tavares
• Fuel octane question   Jason Haines
• Toyota Connectors   Clint Pohler
• Digijet - Digifant   Bernd Felsche
• Converting my motorcycle to EFI   dave.johnson at gb.abb.com
• Digijet - Digifant   Camden Lindsay
• Bosch LH 2.4   Camden Lindsay
• Ign Advance on MR-2   Ron Schroeder
• Digijet - Digifant   Jens Knickmeyer
• DIY-WB Parts Kit update   Steven Ciciora
• DIY-WB Parts Kit update   Brian Renegar
• Ign Advance on MR-2   Diehl, Jeffrey
• Converting my motorcycle to EFI   Stephen Burgess
• List activity???   John Dammeyer
• DIY-WB Sensor Availability?   Peter Gargano
• DIY-WB Output Voltage Scaling   Peter Gargano
• Bosch LH 2.4   Joshua Van Tol
• how does a knock sensor work?   David Gravereaux
• how does a knock sensor work?   Jared Ryan
• DIY-WB Output Voltage Scaling   Glenn & Debbie Woodhouse
• how does a knock sensor work?   rr
• DIY-WB Output Voltage Scaling   rr
• Converting my motorcycle to EFI   Mauricio Tavares
• List activity???   David Hunt
• how does a knock sensor work?   Dave Evans
• Newbie intro   Mark Agnello
• how does a knock sensor work?   Mark Agnello
• VW EFI   alexpeper
• how does a knock sensor work?   mark koenig
• Checksum   POWERCHIPS- A Força Virtual para seu Carro
• Bosch LH 2.4   Camden Lindsay
• Bosch information (oxymoron?)   Peter Gargano
• Checksum   Bruce
• VW EFI   Bernd Felsche
• how does a knock sensor work?   David Gravereaux
• how does a knock sensor work?   David Gravereaux
• DIY-WB Output Voltage Scaling   Bob Wooten
• Checksum   Roger Heflin
• DIY-WB Output Voltage Scaling   Bruce
• how does a knock sensor work?   Mark Agnello
• grok'ed it   Mark Agnello
• Bosch LH 2.4   Joshua Van Tol
• DIY-WB Output Voltage Scaling   Bob Wooten
• grok'ed it   Bob Wooten
• DIY-WB Parts Kit update   Joshua Van Tol
• how does a knock sensor work?   David Gravereaux
• grok'ed it   Bernd Felsche
• grok'ed it   David Gravereaux
• DIY-WB Output Voltage Scaling   Peter Gargano
• grok'ed it   Joshua Van Tol
• grok'ed it   Mark Agnello
• DIY-WB Mixture Display   Peter Gargano
• DIY-WB Output Voltage Scaling   Peter Gargano
• grok'ed it   terryk
• DIY-WB Output Voltage Scaling   Richard Wakeling
• Test - Don't bother Reading!   Andrew Wakeling
• how does a knock sensor work?   David Gravereaux
• grok'ed it   Bernd Felsche
• grok'ed it   lance
• List activity???   Eric Fahlgren
• grok'ed it   Ludis Langens
• DIY-WB Mixture Display   Glenn & Debbie Woodhouse
• how does a knock sensor work?   Phil Hunter
• Converting my motorcycle to EFI   John Dammeyer
• grok'ed it   Dave Williams
• grok'ed it   Dave Williams
• grok'ed it   Shannen Durphey
• DIY-WB Output Voltage Scaling   Phil Hunter
• grok'ed it   Greg Hermann
• grok'ed it   Bob Wooten
• DIY-WB Output Voltage Scaling   Bob Wooten
• DIY-WB Output Voltage Scaling   Bob Wooten
• Test - Don't bother Reading!   Julia Wakeling
• DIY-WB   Jeff Meager
• Bosch LH 2.4   Camden Lindsay
• DIY-WB   Jess Gypin
• DIY-WB Output Voltage Scaling   Richard Wakeling
• DIY-WB   Jörgen Karlsson
• grok'ed it   Shirley, Mark R
• Turbo buick ?'s for Phil   justin ivan
• Turbo buick ?'s for Phil   Mark S. Riley
• grok'ed it   Ron Schroeder
• Turbo buick ?'s for Phil   justin ivan
• Computing MPH   Steve.Flanagan at VerizonWireless.com
• Computing MPH   Greg Hermann
• Computing MPH   Flanagan, Steve
• Computing MPH   steve ravet
• Computing MPH   Greg Hermann
• Computing MPH   Greg Hermann
• Computing MPH   steve ravet
• Computing MPH   Arnaud Westenberg
• WB & logging   Barry Tisdale
• WB & logging   Ron Schroeder
• WB & logging   Brian L Massey
• WB circuit board purchase question   A70Duster at aol.com
• grok'ed it   Kevin Wright
• grok'ed it   Shirley, Mark R
• WB circuit board purchase question   skulte
• WB & logging   Barry Tisdale
• WB & logging   Barry Tisdale
• ALDL Interface   Eric S
• Using a knock sensor from one engine on another   TVS
• DIY-WB [purchase]   rr
• WB & logging   rr
• Using a knock sensor from one engine on another   Camden Lindsay
• WB & logging   Barry Tisdale
• Computing MPH   bcroe at juno.com
• Replacing a BOSCH AFM with a HFM5   944Technologist
• Turbo buick ?'s for Phil   Phil Hunter
• Using a knock sensor from one engine on another   Eric Fahlgren
• Using a knock sensor from one engine on another   TVS
• Using a knock sensor from one engine on another   Bruce
• Using a knock sensor from one engine on another   Bruce
• WB & logging   rr
• WB & logging   Ron Schroeder
• junkyard 396ss coolant advice   James Northrup
• Computing MPH   Jorgen Karlsson
• junkyard 396ss coolant advice   Shirley, Mark R
• junkyard 396ss coolant advice   ECMnut at aol.com
• Using a knock sensor from one engine on another   Camden Lindsay
• junkyard 396ss coolant advice   James Northrup
• junkyard 396ss coolant advice   Bruce
• junkyard 396ss coolant advice   Greg Hermann
• junkyard 396ss coolant advice   Bruce
• WB Board Assembly   Bruce
• WB & logging   Neil.Poersch at mts.mb.ca
• junkyard 396ss coolant advice   David Hunt
• junkyard 396ss coolant advice   David Hunt
• WB & logging   Bob D
• ALDL Interface   David Hunt
• junkyard 396ss coolant advice   James Northrup
• junkyard 396ss coolant advice   Bruce
• junkyard 396ss coolant advice   Bruce
• WB & logging   Bruce
• ALDL Interface   Michael Humphries Woodworking
• junkyard 396ss coolant advice   Shirley, Mark R
• Suzuki CDI information   Bert Bakker
• WB & logging   Barry Tisdale
• LS1 Rev limit   Warwick Anderson
• DIY-WB Output Voltage Scaling   David Hunt
• junkyard 396ss coolant advice   Barry Tisdale
• WB & logging   Barry Tisdale
• LS1 Rev limit   Manuel Desantos
• LS1 Rev limit   944Technologist
• Suzuki CDI information   Joe Beninca
• DIY-WB Output Voltage Scaling   Bruce
• WB & logging   Bruce
• LS1 Rev limit   Bruce
• ALDL Interface   Eric S
• Using a knock sensor from one engine on another   TVS
• Suzuki CDI information   Stephen Burgess
• WB & logging   Bruce
• DIY-WB Output Voltage Scaling   Programmer
• WB & logging   Bernd Felsche
• DIY-WB Output Voltage Scaling   David Hunt
• junkyard 396ss coolant advice   David Hunt
• DIY_EFI Digest V5 #718 - knock sensor   Clare Snyder
• DIY-WB Output Voltage Scaling   David Hunt
• DIY-WB Output Voltage Scaling   Scot Sealander
• DIY-WB Output Voltage Scaling   Bruce
• junkyard 396ss coolant advice, The answer........   Julia Wakeling
• junkyard 396ss coolant advice   Greg Hermann
• junkyard 396ss coolant advice   Greg Hermann
• 396ss coolant advice.....BASICS folks.....   Julia Wakeling
• junkyard 396ss coolant advice   James Northrup
• junkyard 396ss coolant advice   Greg Hermann
• junkyard 396ss coolant advice, The answer........   Bruce
• Small Victory   Bob Wooten
• Small Victory   Bruce
• Small Victory   Shannen Durphey
• DIY-WB vs. Don't DIY   Shannen Durphey
• Suzuki CDI information   Bert Bakker
• Suzuki CDI information   Bert Bakker
• junkyard 396ss coolant advice/welding   Warwick Anderson
• ALDL Interface   Ken Richardson
• WB & logging   Eric Fahlgren
• WB & logging   Eric Fahlgren
• junkyard 396ss coolant advice   Eric Fahlgren
• Suzuki CDI information   Eric Bryant
• LS1 Rev limit   Eric Bryant
• WB & logging   Neil.Poersch at mts.mb.ca
• junkyard 396ss coolant advice   Matt Cramer
• Suzuki CDI information   Bert Bakker
• Small Victory   Programmer
• WB & logging   Barry Tisdale
• WB & logging   Barry Tisdale
• WB & logging   Barry Tisdale
• WB & logging   Bruce
• WB & logging   Bruce
• WB & logging   Bruce
• Dissasemblers, Simos   Morten T Nielsen
• WB & logging   Eric Fahlgren
• Dissasemblers, Simos   steve ravet
• WB & logging   Greg Hermann
• WB & logging   Greg Hermann
• commercial use   General Motors
• DIY_EFI Digest V5 #718 - knock sensor   Mark Agnello
• Suzuki CDI information   lance
• commercial use   rr
• calibration test gas mixtures [was Re: NTK UEGO calibration]   Jason Haines
• wide band O2 sensor image on Motec web site [was Re: DIY-WB]   Jason Haines
• wide band O2 sensor image on Motec web site [was Re: DIY-WB]   Richard Wakeling
• wide band O2 sensor image on Motec web site [was Re: DIY-WB]   Frank F Parker
• Bosch wide band O2 sensor   Peter Gargano
• junkyard 396ss coolant advice   Julia Wakeling
• junkyard 396ss coolant advice, The answer........   Julia Wakeling
• wide band O2 sensor image on Motec web site   Bernd Felsche
• junkyard 396ss coolant advice/welding   Julia Wakeling
• wide band O2 sensor image on Motec web site   Jeff Meager
• diy-wb pcb order confirm info question.....   Camden Lindsay
• diy-wb pcb order confirm info question.....   justin ivan
• junkyard 396ss coolant advice, The answer........   Eric Bryant
• diy-wb pcb order confirm info question.....   Stephen Andersen
• diy-wb pcb order confirm info question.....   Jim Yeagley
• diy-wb pcb order confirm info question.....   Ernst den Broeder
• knock frequency characteristics   Carter Shore
• diy-wb pcb order confirm info question.....   Shirley, Mark R
• diy-wb pcb order confirm info question.....   David Gregory
• DIY_EFI Digest V5 #723   Gregory Dimitriadis
• diy-wb pcb order confirm info question.....   Mark S. Riley
• bbc junkyard efi   James Northrup
• DIY_EFI Digest V5 #718 - knock sensor   David Hunt
• Bandwidth and Time, please stop the small talk   Steve.Flanagan at VerizonWireless.com
• wide band O2 senso and Bosch questions   Greg Hermann
• diy-wb pcb order confirm info question.....   Greg Hermann
• DIY_EFI Digest V5 #724   Phil Hunter
• wide band O2 senso and Bosch questions   Camden Lindsay
• wide band O2 senso and Bosch questions   Eric Fahlgren
• wide band O2 senso and Bosch questions   Greg Hermann
• wide band O2 senso and Bosch questions   Rich M
• Wanted: EFI software expert   Al Lipper
• wide band O2 senso and Bosch questions   Xin
• WB Board & kit orders   CEIJR at aol.com
• Dinjection   Shannen Durphey
• Dinjection   Greg Hermann
• Dinjection   Bernd Felsche
• wide band O2 senso and Bosch questions   Bernd Felsche
• wide band O2 senso and Bosch questions   Greg Hermann
• wide band O2 senso and Bosch questions   Bernd Felsche
• Can't get a post through.   Josh Ely
• WB Board kit orders   romans, mark
• Wide Band O2 Sensor Project   Don DRI05 Ricciardiello
• Wide Band O2 Sensor Project   Peter Gargano
• H2O Injection Pump?   Robert Wimmer
• New file in /incoming   Jim Yeagley
• wide band O2 senso and Bosch questions   Daniel
• WB Board kit orders   Michael Humphries Woodworking
• wide band O2 senso and Bosch questions   Bernd Felsche
• Orbital   Daniel
• Bosch Distributor replacemetn for cam timing   Derek Catterfeld
• H2O Injection Pump?   chauvin at ghg.net
• H2O Injection Pump?   Bruce
• New file in /incoming   Bruce
• DFI was RE: Orbital   James Northrup
• H2O Injection Pump?   Eric Fahlgren
• Al Lipper ad - crock of shit!   A70Duster at aol.com
• Wanted: EFI software expert   Kris Weldy
• Assembling the WB   Bruce

Last message date: Fri Aug 31 21:51:13 GMT 2001
Archived on: Thu May 30 05:59:25 GMT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...