DIY-WB Output Voltage Scaling

[Programmer]

About my only involvement could be is in testing. I can get calibration
gasses and compare against my SUN450--btw--this would be no charge to anyone
wanting their final
project verified for accuracy. I can lay a good bead on a MIG--but forget
the soldering thing <G>... I'd melt it down.

Lyndon.
----- Original Message -----
From: "Bruce" <nacelp at bright.net>
To: <gmecm at diy-efi.org>; <diy_efi at diy-efi.org>
Sent: Monday, August 28, 2000 5:18 PM
Subject: Re: DIY-WB Output Voltage Scaling


>
>
> No need to.
> I have no involvement with it.
> My **gripe** was with money being made off of my energy, and my money (ie
> the DIY-WB).   While people were just talking, I and some others actually
> DID something, and followed thru on it.   The intent was for it to be a
> freebie, at least none commercial, and to min anyone making any money off
of
> it.  Anyone can now wire one up (PCB optionial), point to point, and have
it
> in his hands for the cost of parts.  Part of the reason for the PCB effort
> was to keep it a no profit deal.
>    It was also to be educational, while not everyone cares about the
> exactness of how it works most builders will have an appreciation, for
that
> they have, and an "in passing" idea of how it works.
>
> There are alot of posts I let go by now a days.  Because, I'm not going to
> play tech support for someone.  Also, a couple projects went on hold, just
> waiting to see how this shakes out.
>
> It's about time for a *by invitation* EFI list.   But at this stage, with
so
> much off list traffic, that's about where some things are anyway.
Between
> folks trying to cash in on others work, and those that refuse to read the
> archives (the recent thread on K/Ss is an excellent example of lots of
> discuss about a topic, with some real meat for answers in the archives),
> the list gets stagnant.   It's not a gripe, just how I see things.   With
> things continuing in this direction, there will be more guys going into
lurk
> mode, eventually it'll get around to where folks just talk about car wax.
> Bruce
>     Just a public answer to your public question
>
>
> From: "David Hunt" <bamainc at home.com>
> Subject: Re: DIY-WB Output Voltage Scaling
> > Well Bruce, are you going to comment on this blatant comercialization?
Or
> > is it not worth the bandwidth?
> > dh
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org