Changing output of WB O2 setup (Autronic)

[Jorgen Karlsson]

Arghhh,

I think that we have to talk to the guys at FJO, the diagram I recived from
them suggest that 11:1 is more like 1.8V. They seem to send different
information to everyone...

You can find the diagram in incomming now, I named it: FJO WBO2 Calibration
curve.PDF


Jorgen Karlsson
Gothenburg, Sweden.


>
> Glenn,
>
> Looking at the spec sheet for the analog output of the FJO unit
> it seems to
> range from 1.25V to 2.5V for AFR's of 11:1 to stoich. This gives a voltage
> swing of 1.25V.   Where did you get your info from?
>
> Neil
>
>
>
> >
> For those interested in using a WB for forced induction tuning, thus being
> primarily interested in A/F ranges fron stoich to ~11:1, the NTK and FJO
> controller boxes' output voltage only ranges about 0.5 volts.
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org