Changing output of WB O2 setup (Autronic)

[Neil.Poersch at mts.mb.ca]

Glenn,

Looking at the spec sheet for the analog output of the FJO unit it seems to
range from 1.25V to 2.5V for AFR's of 11:1 to stoich. This gives a voltage
swing of 1.25V.   Where did you get your info from?

Neil



>
For those interested in using a WB for forced induction tuning, thus being
primarily interested in A/F ranges fron stoich to ~11:1, the NTK and FJO
controller boxes' output voltage only ranges about 0.5 volts.
<


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org