DIY-WB Output Voltage Scaling

[Bruce]

Geesh,  "went after", not hardly.  I just had to continually reexplain
things, since some folks seemed to have the urge to violate the spirit of
the project, or were willing to support others in their violation of it.
For some it takes time to get the knack of soldering or software, some never
do, but not to make a sincere attempt, leaves them at just short changing
themselves.
Bruce



From: "David Hunt" <bamainc at home.com>
Subject: Re: DIY-WB Output Voltage Scaling
> Steve,
> I know that BP had some significant input, but he was ragging heavily on
> others.  I was only one of those that he went after.  Not everyone can
> solder, and some shouldn't solder.  Not everyone should write software and
> some shouldn't write software.....etc.
> Who is the moderator of the diy_efi list?
> dh

> ----- Original Message -----
> From: "David Hunt" <bamainc at home.com>
> To: "steve ravet" <sravet at arm.com>
> Cc: <DIY_EFI at lists.diy-efi.org>
> Sent: Tuesday, August 28, 2001 9:12 PM
> Subject: Re: DIY-WB Output Voltage Scaling
>
>
> > I apologize.
> >
> > dh
> > ----- Original Message -----
> > From: "steve ravet" <sravet at arm.com>
> > To: "David Hunt" <bamainc at home.com>
> > Sent: Tuesday, August 28, 2001 5:47 PM
> > Subject: Re: DIY-WB Output Voltage Scaling
> >
> >
> > > Nice.  a 130 line post, with 2 lines of original content.  If an
attempt
> > > to provoke a response with a personal dig can be considered original,
> > > that is.  That'll look nice in the archives.  Send this stuff
> > > privately.  No-one but you and Bruce care.
> > >
> > > David Hunt wrote:
> > > >
> > > > Well Bruce, are you going to comment on this blatant
comercialization?
> > Or
> > > > is it not worth the bandwidth?
> > > >
> > >
> > > --steve
> > >
> > > --
> > > Steve Ravet
> > > steve.ravet at arm.com
> > > ARM,Inc.
> > > www.arm.com
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org