Non EFI, sort of.

[Jon]

On Mon, 13 Aug 2001, Barry Tisdale wrote:

> I'm looking for a 3"ID flexible hose, rigid enough to take some suction w/o
> collapsing.  Its to go from my turbo inlet to the air filter.  The
> corregated polyethylene hose used on shopvacs would be great, but its only 2".
> 
> Any suggestions as to what I might look for?


  You might try to find some 3" flexible exhaust tubing.  Its nowhere near
as flexible as a shop vac hose might be, but depending on what sort of 
routing you need, it may work.  Another option might be to buy some 
mandrel bends from someplace likc JC Whitney or an exhaust shop, then
cut 'em up and put them together however you need to.  (Either by welding
them together or using 3" silicone connectors.)  

                                              -Jon-

 .---- Jon Steiger ------ jon at dakota-truck.net or jon at jonsteiger.com -----.
 |  I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA.   Rec & UL Pilot - SEL  |
 | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly |
 `----------------------------------------- http://www.jonsteiger.com ----'



----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org