Ign Advance on MR-2

[Diehl, Jeffrey]

Ooooooh....  Good point.  It sure would suck to be trying to fix an
unrelated problem only to hose the ignition when you open the hood.

Thanx,
Mike Diehl,
Network Monitoring Tool Devl.
Sandia National Laboratories.
(505) 284-3137
jdiehl at sandia.gov

> -----Original Message-----
> From: Ron Schroeder [mailto:rjs at bnl.gov]
> Sent: August 24, 2001 8:53 AM
> To: diy_efi at diy-efi.org
> Subject: RE: Ign Advance on MR-2
> 
> 
> At 02:56 PM 8/22/01 -0600, you wrote:
> >Ok, I'm convinced.  The LED is much easier to fabricate, but 
> I intend to
> >drive this car to and from work and it needs to be reliable.
> >
> >As an aside, is reflected light really that big of an issue 
> if the car has a
> >hood on it?  Not trying to be difficult, but I have to ask.
> 
>    You might want to diagnose it with the hood open outdoors sometime.
> 
> 
> 
> Ron Schroeder
> WD8CDH
> E. E. S.
> wd8cdh at bnl.gov
> rjs at bnl.gov
> ron at 112motors.com
> 631 344-4561 Day
> 631 286-5677 Nite
> --------------------------------------------------------------
> --------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" 
> (without the quotes)
> in the body of a message (not the subject) to 
> majordomo at lists.diy-efi.org
> 
> 

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org