Non EFI, sort of.

[Flanagan, Steve]

Do not use rubber hose.

Go to your local hardware store (home depot, etc) and look for stove pipe,
the 90 deg
pieces can be spun in many ways to make any shape/bend possible.

That shopvac hose may work but I would not trust.  It can crack due to
heat,etc, and
the last thing you want going through your engine and turbine is plastic.
Use metal,
its the best solution.  

On our drag cars we do not ever use an air filter at all.

Steve 


-----Original Message-----
From: Barry Tisdale [mailto:btisdale at cybersol.com]
Sent: Monday, August 13, 2001 11:22 AM
To: diy_efi at diy-efi.org
Subject: Non EFI, sort of.


I'm looking for a 3"ID flexible hose, rigid enough to take some suction w/o
collapsing.  Its to go from my turbo inlet to the air filter.  The
corregated polyethylene hose used on shopvacs would be great, but its only
2".

Any suggestions as to what I might look for?

Thanks - Barry
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org