Wide Band O2 Sensor Project

[Peter Gargano]

Don

I'm the group buyer for Australia. If you want a board they'll be
less than $20. Sensors on the other hand may be as much as AU$300.

You need some electronics experience to build the board.

DRI05? What's that mean?

Peter.

Don DRI05 Ricciardiello wrote:
> 
> Hello listers,
> 
> I read with great interest Robert Rauscher's project on DIY WB O2 sensors
> and pose these questions. Where can I buy the printed circuit board for
> this project? And secondly, I notice there is no provision to read out the
> voltages/lambda readings. How can this be accomplished (keeping in mind my
> knowledge of electronics is very challenged). The project will be ideal for
> my purposes which is to assist in tuning my carburated racing motorcycle. I
> have fitted aftermarket carbs and I feel this unit will greatly reduce my
> tuning time. I recently priced MOTEC's Professional Lambda Meter at $1800
> Australian Dollars w/o sensor......quite out of my league.
> 
> Many thanks for your time.
> 
> Don
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org