SAAB variable compression, WAS: Flame on

Richard M richm at ntlworld.com
Thu Dec 6 16:36:34 GMT 2001


Also very interesting in a similar vein is the Mayflower development of
variable CR and swept volume. An adjustable link is added between the conrod
and crank pin which can adjust the effective conrod length. Reported in
European Automotive Design, November 2001 - "As well as moving horizontally,
the pivot arm can simultaneously move vertically, which has the effect of
changing the CR and/or capacity of the engine while it is running. In this
way, Mayflower's experimental single-cylinder engine can alter its capacity
from 260 to 300cc or its CR from 9:1 to 15:1 in 15mS"

Rich

----- Original Message -----
From: Shirley, Mark R <MarkRShirley at eaton.com>
To: <diy_efi at diy-efi.org>
Sent: Thursday, December 06, 2001 3:40 PM
Subject: RE: SAAB variable compression, WAS: Flame on


> That variable compression engine was developed by SAAB, not VW.
> It was in Automotive Engineering last year.
>
> > -----Original Message-----
> > From: bill.shurvinton at nokia.com [mailto:bill.shurvinton at nokia.com]
> > Sent: Thursday, December 06, 2001 3:16 AM
> > To: diy_efi at diy-efi.org
> > Subject: RE: Flame on
> >
> >
> >
> > My particular fave is the VW variable compression head which goes from
> > 14:1 lean burn to 8.5:1 forced induction. Hats off if they
> > can get that
> > to be reliable.
> >
> > Bill
> >
> >
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



More information about the Diy_efi mailing list