December 2001 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Dec 1 00:03:29 GMT 2001
Ending: Sat Dec 29 22:01:29 GMT 2001
Messages: 1929

• Air Temp effects on Atomization????   Steve.Flanagan at VerizonWireless.com
• outage?   Programmer
• 12 V regulator   Steve.Flanagan at VerizonWireless.com
• WB O2 sensor connector - Sumitomo   Kris Sundell
• Question about connectors for DIY-WB   Brian Renegar
• Question about connectors for DIY-WB   Bruce
• OT now, was New member - Aircraft engine EFI   dave.johnson at gb.abb.com
• outage?   Steve.Flanagan at VerizonWireless.com
• Air Temp effects on Atomization????   Steve.Flanagan at VerizonWireless.com
• outage?   Programmer
• Majordomo results   majordomo at diy-efi.org
• Confirmation for subscribe diy_efi   majordomo at diy-efi.org
• Majordomo results   majordomo at diy-efi.org
• Welcome to diy_efi   majordomo at diy-efi.org
• Majordomo results   majordomo at diy-efi.org
• 12 V regulator   Steve.Flanagan at VerizonWireless.com
• 12 V regulator   rr
• WB O2 sensor connector - Sumitomo   Kris Sundell
• 12 V regulator   rr
• 12 V regulator   Steve.Flanagan at VerizonWireless.com
• 12 V regulator   Steve.Flanagan at VerizonWireless.com
• 12 V regulator   Ron Schroeder
• 12 V regulator   Ron Schroeder
• 12 V regulator   bcroe at juno.com
• Need Info On Programming ECU   944Technologist
• 12 V regulator   bcroe at juno.com
• Need Info On Programming ECU   944Technologist
• Need Info On Programming ECU   David Goldstein
• MSD 6A   Eric Deslauriers
• [ADMIN] @home addresses   Orin
• MSD 6A   Eric Deslauriers
• Need Info On Programming ECU   David Goldstein
• [ADMIN] @home addresses   Orin
• MSD 6A   purplemonster
• MSD 6A   elcamino73
• MSD 6A   Bruce
• MSD 6A   elcamino73
• MSD 6A   purplemonster
• eDist Info   Bruce
• MSD 6A   Bruce
• Air Temp effects on Atomization????   Bernd Felsche
• Soldering Techniques   Bernd Felsche
• eDist Info   Bruce
• Air Temp effects on Atomization????   Bernd Felsche
• Soldering Techniques   Bernd Felsche
• test   Kris Weldy
• test   Kris Weldy
• test   john
• test   john
• copy eproms   Tom Cheung
• copy eproms   Tom Cheung
• Intake manifold construction, intercoolers   Rausch, Bernd
• Intake manifold construction, intercoolers   Rausch, Bernd
• copy eproms   Richard M
• copy eproms   Richard M
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• AW: Intake manifold construction, intercoolers   Rausch, Bernd
• AW: Intake manifold construction, intercoolers   Rausch, Bernd
• Intake manifold construction, intercoolers   Jörgen Karlsson
• eDist Info   Shane Moseley
• Intake manifold construction, intercoolers   Jörgen Karlsson
• eDist Info   Shane Moseley
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• Racelogic Emulator was RE: Honda ecm..hondata   Stephen Andersen
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Jörgen Karlsson
• Intake manifold construction, intercoolers   Jörgen Karlsson
• Racelogic Emulator was RE: Honda ecm..hondata   Stephen Andersen
• AW: Intake manifold construction, intercoolers   Rausch, Bernd
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• AW: Intake manifold construction, intercoolers   Rausch, Bernd
• eDist Info   Bruce
• eDist Info   Bruce
• Intake manifold construction, intercoolers   Bruce
• AW: Intake manifold construction, intercoolers   Rausch, Bernd
• AW: Intake manifold construction, intercoolers   Rausch, Bernd
• AW: Intake manifold construction, intercoolers   Bernd Felsche
• AW: Intake manifold construction, intercoolers   Bernd Felsche
• AW: Intake manifold construction, intercoolers   Bruce
• AW: Intake manifold construction, intercoolers   Bruce
• copy eproms   Timothy J Burgess
• copy eproms   Timothy J Burgess
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• AW: AW: Intake manifold construction, intercoolers   Rausch, Bernd
• copy eproms   Tom Cheung
• AW: AW: Intake manifold construction, intercoolers   Rausch, Bernd
• AW: Intake manifold construction, intercoolers   Rausch, Bernd
• AW: AW: Intake manifold construction, intercoolers   TwoLnBlktp90 at aol.com
• copy eproms   Tom Cheung
• Non email DIY list???   Steve.Flanagan at VerizonWireless.com
• copy eproms   944Technologist
• AW: Intake manifold construction, intercoolers   Rausch, Bernd
• Non email DIY list???   steve ravet
• AW: AW: Intake manifold construction, intercoolers   Bruce
• Non email DIY list???   Steve.Flanagan at VerizonWireless.com
• AW: AW: Intake manifold construction, intercoolers   TwoLnBlktp90 at aol.com
• Need Info On Programming ECU   944Technologist
• Steve's Parts Kit   David Gregory
• copy eproms   944Technologist
• Non email DIY list???   steve ravet
• Steve's Parts Kit   David Gregory
• AW: AW: Intake manifold construction, intercoolers   Bruce
• Need Info On Programming ECU   944Technologist
• AW: AW: Intake manifold construction, intercoolers   Shawn Fogg
• Steve's Parts Kit   Bruce
• eDist Info   Sam Weatherby
• AW: AW: Intake manifold construction, intercoolers   Shirley, Mark R
• eDist Info   Bruce
• AW: AW: Intake manifold construction, intercoolers   Bruce
• Steve's Parts Kit   Bruce
• AW: AW: Intake manifold construction, intercoolers   Shawn Fogg
• AW: AW: Intake manifold construction, intercoolers   Shawn Fogg
• copy eproms   Tom Cheung
• eDist Info   Sam Weatherby
• AW: AW: Intake manifold construction, intercoolers   Shirley, Mark R
• AW: AW: Intake manifold construction, intercoolers   Bruce
• AW: AW: Intake manifold construction, intercoolers   Shawn Fogg
• copy eproms   Tom Cheung
• eDist Info   Bruce
• Steve's Parts Kit   Brian Renegar
• Steve's Parts Kit   Bruce
• eDist Info   Shirley, Mark R
• Steve's Parts Kit   Brian Renegar
• Steve's Parts Kit   Bruce
• Steve's Parts Kit   skulte
• eDist Info   Shirley, Mark R
• Steve's Parts Kit   skulte
• eDist Info   Sam Weatherby
• eDist Info   Sam Weatherby
• AW: AW: Intake manifold construction, intercoolers   Bernd Felsche
• AW: AW: Intake manifold construction, intercoolers   Bernd Felsche
• Steve's Parts Kit   Jurgen Hartwig
• Motorola microcontroller identification   Ludis Langens
• Seeking a little advice on EFI project   Ludis Langens
• AW: AW: Intake manifold construction, intercoolers   Bernd Felsche
• Steve's Parts Kit   Jurgen Hartwig
• AW: AW: Intake manifold construction, intercoolers   Bernd Felsche
• Steve's Parts Kit   Cosby, Melvin C. (GEL, MSX)
• Seeking a little advice on EFI project   Ludis Langens
• Motorola microcontroller identification   Ludis Langens
• Steve's Parts Kit   Cosby, Melvin C. (GEL, MSX)
• AW: Intake manifold construction, intercoolers   Bernd Felsche
• AW: AW: Intake manifold construction, intercoolers   Dave Williams
• Seeking a little advice on EFI project   Sam Weatherby
• AW: AW: Intake manifold construction, intercoolers   Bernd Felsche
• Seeking a little advice on EFI project   Sam Weatherby
• AW: Intake manifold construction, intercoolers   Bernd Felsche
• ECU Info   LOW4SHOW at aol.com
• AW: AW: Intake manifold construction, intercoolers   Dave Williams
• AW: AW: Intake manifold construction, intercoolers   Bernd Felsche
• ECU Info   LOW4SHOW at aol.com
• AW: Intake manifold construction, intercoolers   Kevin _
• AW: Intake manifold construction, intercoolers   Kevin _
• is this a WB02 sensor?   Rob F
• AW: Intake manifold construction, intercoolers   The Dupuis
• is this a WB02 sensor?   Rob F
• AW: Intake manifold construction, intercoolers   The Dupuis
• Steve's Parts Kit   GT40MkI at aol.com
• Steve's Parts Kit   GT40MkI at aol.com
• Intake manifold construction, intercoolers   Jörgen Karlsson
• Steve's Parts Kit   David Gregory
• Intake manifold construction, intercoolers   Jörgen Karlsson
• Steve's Parts Kit   David Gregory
• Steve's Parts Kit   GT40MkI at aol.com
• is this a WB02 sensor?   Acetone1 at aol.com
• eDist Info   Shirley, Mark R
• is this a WB02 sensor?   Acetone1 at aol.com
• eDist Info   Shirley, Mark R
• is this a WB02 sensor?   The Dupuis
• Steve's Parts Kit   GT40MkI at aol.com
• Intake manifold construction, intercoolers   Rausch, Bernd
• Motorola microcontroller identification   Richard M
• Motorola microcontroller identification   Richard M
• is this a WB02 sensor?   The Dupuis
• Intake manifold construction, intercoolers   Rausch, Bernd
• Intake manifold construction, intercoolers   Craig Dotson
• Intake manifold construction, intercoolers   Craig Dotson
• Seeking a little advice on EFI project   Tomas J. Sokorai Sch.
• Seeking a little advice on EFI project   Tomas J. Sokorai Sch.
• is this a WB02 sensor?   steve ravet
• is this a WB02 sensor?   steve ravet
• Intake manifold construction, intercoolers   Axel Rietschin
• Steve's Parts Kit   Brian Renegar
• Intake manifold construction, intercoolers   Axel Rietschin
• Steve's Parts Kit   Brian Renegar
• Intake manifold construction, intercoolers   Bruce
• WTB: wideband o2 kit or board   jester at westfailure.net
• Intake manifold construction, intercoolers   Bruce
• WTB: wideband o2 kit or board   jester at westfailure.net
• AW: DIY_EFI Digest V5 #909   Jens Knickmeyer
• Intake manifold construction, intercoolers   Bruce
• (911 Technologist) Need Info On Programming ECU   David Goldstein
• Wideband sensor connector   Brian Renegar
• Intake manifold construction, intercoolers   Bruce
• Wideband sensor connector   Brian Renegar
• AW: DIY_EFI Digest V5 #909   Jens Knickmeyer
• (911 Technologist) Need Info On Programming ECU   David Goldstein
• The Parts Bin - International Order help needed.   Peter Gargano
• Intake manifold construction, intercoolers   Craig Dotson
• Cam position sensing w/o a cam sensor   Craig Dotson
• The Parts Bin - International Order help needed.   Peter Gargano
• Intake manifold construction, intercoolers   Craig Dotson
• Intake manifold construction, intercoolers   James Montebello
• Cam position sensing w/o a cam sensor   Craig Dotson
• Need Info On Programming ECU   944Technologist
• Intake manifold construction, intercoolers   James Montebello
• Need Info On Programming ECU   944Technologist
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• The Parts Bin - International Order help needed.   Bruce
• Intake manifold construction, intercoolers   Bruce
• The Parts Bin - International Order help needed.   Bruce
• Intake manifold construction, intercoolers   James Montebello
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   James Montebello
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Kelly McCrystle
• Intake manifold construction, intercoolers   Kelly McCrystle
• New cam for TPI 350   Dan Zorde
• O2 sensor pullup resistor values?   Peter Florance
• New cam for TPI 350   Dan Zorde
• O2 sensor pullup resistor values?   Ludis Langens
• O2 sensor pullup resistor values?   Bernd Felsche
• O2 sensor pullup resistor values?   Peter Florance
• Intake manifold construction, intercoolers   Kevin _
• Intro,,,, Street Outlaw (NHRA) looking for Megasquirt EFI   powermaxx
• O2 sensor pullup resistor values?   Bernd Felsche
• EGO voltages   Bernd Felsche
• O2 sensor pullup resistor values?   Ludis Langens
• Intake manifold construction, intercoolers   Kevin _
• O2 sensor pullup resistor values?   Peter Florance
• CVT (was:Intake manifold construction, intercoolers)   Bernd Felsche
• EGO voltages   Bernd Felsche
• Intro,,,, Street Outlaw (NHRA) looking for Megasquirt EFI   powermaxx
• O2 sensor pullup resistor values?   Peter Florance
• CVT (was:Intake manifold construction, intercoolers)   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• O2 sensor pullup resistor values?   Jeffrey Engel
• O2 sensor pullup resistor values?   Bernd Felsche
• is this a WB02 sensor?   bill.shurvinton at nokia.com
• O2 sensor pullup resistor values?   Jeffrey Engel
• O2 sensor pullup resistor values?   Bernd Felsche
• KC-5300 kit - Batch 7474 -- WARNING   Peter Gargano
• is this a WB02 sensor?   bill.shurvinton at nokia.com
• Intake manifold construction, intercoolers   Bruce
• KC-5300 kit - Batch 7474 -- WARNING   Peter Gargano
• O2 sensor pullup resistor values?   Bruce
• Intake manifold construction, intercoolers   Bruce
• New cam for TPI 350   Bruce
• O2 sensor pullup resistor values?   Bruce
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bruce
• New cam for TPI 350   Bruce
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bernd Felsche
• O2 sensor pullup resistor values?   bcroe at juno.com
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bruce
• O2 sensor pullup resistor values?   bcroe at juno.com
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• O2 sensor pullup resistor values? (longish)   Peter Florance
• O2 sensor pullup resistor values?   Peter Florance
• Intake manifold construction, intercoolers   Alvaro Gil
• O2 sensor pullup resistor values? (longish)   Peter Florance
• Intake manifold construction, intercoolers   Alvaro Gil
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• O2 sensor pullup resistor values?   Peter Florance
• Intake manifold construction, intercoolers   Shannen Durphey
• Intake manifold construction, intercoolers   Shannen Durphey
• Audi R8   bill.shurvinton at nokia.com
• Intake manifold construction, intercoolers   bill.shurvinton at nokia.com
• Audi R8   bill.shurvinton at nokia.com
• Flame on   bill.shurvinton at nokia.com
• Intake manifold construction, intercoolers   bill.shurvinton at nokia.com
• Flame on   bill.shurvinton at nokia.com
• Audi DI   bill.shurvinton at nokia.com
• MC68HC908GP32 programmer   Blake Anghilante
• Audi DI   bill.shurvinton at nokia.com
• MC68HC908GP32 programmer   Blake Anghilante
• CVT (was:Intake manifold construction, intercoolers)   Igor Dorrestijn
• Audi DI   Bernd Felsche
• Audi R8   Bernd Felsche
• Intake manifold construction, intercoolers   Alvaro Gil
• Audi R8   bill.shurvinton at nokia.com
• Audi DI   bill.shurvinton at nokia.com
• Iron selection   Alvaro Gil
• Iron selection   Alvaro Gil
• Audi DI   Bernd Felsche
• Audi DI   Bernd Felsche
• CVT (was:Intake manifold construction, intercoolers)   Igor Dorrestijn
• Audi R8   Bernd Felsche
• Iron selection   Peter Florance
• Iron selection   David Gravereaux
• Audi DI   Bernd Felsche
• Intake manifold construction, intercoolers   Alvaro Gil
• Audi R8   bill.shurvinton at nokia.com
• Iron selection   David Gravereaux
• Iron selection   Peter Florance
• Audi DI   bill.shurvinton at nokia.com
• Flame on   Bruce
• Audi DI   Bruce
• Flame on   Bruce
• Audi DI   Craig Dotson
• O2 sensor pullup resistor values?   rr
• Intake manifold construction, intercoolers   Bruce
• CVT (was:Intake manifold construction, intercoolers)   Craig Dotson
• Audi DI   Bruce
• Intake manifold construction, intercoolers   Bruce
• O2 sensor pullup resistor values?   rr
• CVT (was:Intake manifold construction, intercoolers)   Bruce
• Audi DI   Craig Dotson
• Intake manifold construction, intercoolers   Bruce
• CVT (was:Intake manifold construction, intercoolers)   Craig Dotson
• New cam for TPI 350   James Adams
• Intake manifold construction, intercoolers   Bruce
• CVT (was:Intake manifold construction, intercoolers)   Bruce
• KC-5300 kit - Batch 7474 -- WARNING   Bruce
• New cam for TPI 350   James Adams
• Intro,,,, Street Outlaw (NHRA) looking for Megasquirt EFI   Bruce
• KC-5300 kit - Batch 7474 -- WARNING   Bruce
• Intro,,,, Street Outlaw (NHRA) looking for Megasquirt EFI   Bruce
• CVT (was:Intake manifold construction, intercoolers)   Dave Williams
• Intake manifold construction, intercoolers   Programmer
• CVT (was:Intake manifold construction, intercoolers)   Dave Williams
• O2 sensor pullup resistor values?   Peter Florance
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Programmer
• CVT (was:Intake manifold construction, intercoolers)   Erik Quackenbush
• Audi DI   Bernd Felsche
• CVT (was:Intake manifold construction, intercoolers)   Igor Dorrestijn
• O2 sensor pullup resistor values?   Peter Florance
• Intake manifold construction, intercoolers   Bernd Felsche
• SAAB variable compression, WAS: Flame on   Shirley, Mark R
• Audi DI   Bernd Felsche
• O2 sensor pullup resistor values?   rr
• CVT (was:Intake manifold construction, intercoolers)   Igor Dorrestijn
• CVT (was:Intake manifold construction, intercoolers)   Erik Quackenbush
• Intake manifold construction, intercoolers   Bernd Felsche
• SAAB variable compression, WAS: Flame on   Richard M
• SAAB variable compression, WAS: Flame on   Shirley, Mark R
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bernd Felsche
• O2 sensor pullup resistor values?   rr
• WBO2 kits update   Steven Ciciora
• SAAB variable compression, WAS: Flame on   Richard M
• O2 sensor pullup resistor values?   Phil Hunter
• CVT (was:Intake manifold construction, intercoolers)   Bernd Felsche
• CVT (was:Intake manifold construction, intercoolers)   Bernd Felsche
• Intake manifold construction, intercoolers   Bruce
• WBO2 kits update   Steven Ciciora
• O2 sensor pullup resistor values?   Phil Hunter
• CVT (was:Intake manifold construction, intercoolers)   Bernd Felsche
• CVT (was:Intake manifold construction, intercoolers)   Bernd Felsche
• Iron selection   steve ravet
• Intake manifold construction, intercoolers   Axel Rietschin
• Intake manifold construction, intercoolers   Kevin _
• CVT (was:Intake manifold construction, intercoolers)   Igor Dorrestijn
• diy-wb, Turbo Sunbird, and wb-lcd   Bill Shaw
• Iron selection   steve ravet
• Intake manifold construction, intercoolers   Axel Rietschin
• CVT (was:Intake manifold construction, intercoolers)   Igor Dorrestijn
• Intake manifold construction, intercoolers   Kevin _
• Intake manifold construction, intercoolers   Bernd Felsche
• diy-wb, Turbo Sunbird, and wb-lcd   Bill Shaw
• CVT (was:Intake manifold construction, intercoolers)   Bernd Felsche
• Flame on   Camden Lindsay
• Audi DI   Programmer
• CVT (was:Intake manifold construction, intercoolers)   Programmer
• Intake manifold construction, intercoolers   Bernd Felsche
• CVT (was:Intake manifold construction, intercoolers)   Programmer
• CVT (was:Intake manifold construction, intercoolers)   Bernd Felsche
• Flame on   Camden Lindsay
• Audi DI   Programmer
• CVT (was:Intake manifold construction, intercoolers)   Craig Dotson
• Intake manifold construction, intercoolers   Alvaro Gil
• Iron selection   efi_student
• CVT (was:Intake manifold construction, intercoolers)   Alvaro Gil
• CVT (was:Intake manifold construction, intercoolers)   Craig Dotson
• Iron selection   efi_student
• Intake manifold construction, intercoolers   Alvaro Gil
• CVT (was:Intake manifold construction, intercoolers)   Alvaro Gil
• CVT (was:Intake manifold construction, intercoolers)   Dave Williams
• CVT (was:Intake manifold construction, intercoolers)   Dave Williams
• DIY_EFI Digest V5 #913   Charles
• AW: Intake manifold construction, intercoolers   steve ravet
• (944 Technologist) RE: Need Info On Programming ECU   David Goldstein
• AW: Intake manifold construction, intercoolers   steve ravet
• DIY_EFI Digest V5 #913   Charles
• AW: Intake manifold construction, intercoolers   Bruce
• MC68HC908GP32 programmer   Bruce Bowling
• O2 sensor pullup resistor values?   Ludis Langens
• MC68HC908GP32 programmer   Bruce Bowling
• AW: Intake manifold construction, intercoolers   Bruce
• (944 Technologist) RE: Need Info On Programming ECU   David Goldstein
• O2 sensor pullup resistor values?   Ludis Langens
• Intro,,,, Street Outlaw (NHRA) looking for Megasquirt EFI   powermaxx
• CVT (was:Intake manifold construction, intercoolers)   Programmer
• D8 of DIY WB   Kazuhisa Nishishita
• Intake manifold construction, intercoolers   Mos
• gm idle valve   ivan
• SAAB variable compression   bill.shurvinton at nokia.com
• Frederic Breitwieser   Rausch, Bernd
• gm idle valve   Ludis Langens
• Spark plugs   bill.shurvinton at nokia.com
• gm idle valve   Peter Gargano
• Megasquirt Injector PWM   dave.johnson at gb.abb.com
• D8 of DIY WB   rr
• Intake manifold construction, intercoolers   Greg Hermann
• Spark plugs   Bruce
• gm idle valve   Bernd Felsche
• Spark plugs   bill.shurvinton at nokia.com
• Spark plugs   Axel Rietschin
• Spark plugs   Greg Hermann
• Intake manifold construction, intercoolers   Bernd Felsche
• Spark plugs   bill.shurvinton at nokia.com
• Intake manifold construction, intercoolers   bill.shurvinton at nokia.com
• Intake manifold construction, intercoolers   Greg Hermann
• Intake manifold construction, intercoolers   Bruce
• Spark plugs   Greg Hermann
• D8 of DIY WB   Kazuhisa Nishishita
• Intake manifold construction, intercoolers   Greg Hermann
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• D8 of DIY WB   Brian Renegar
• Intake manifold construction, intercoolers   Huw Scourfield
• Intake manifold construction, intercoolers   Greg Hermann
• Spark plugs   bill.shurvinton at nokia.com
• Spark plugs   Bruce
• Spark plugs   Bruce
• Spark plugs   Greg Hermann
• Spark plugs   Bruce
• Spark plugs   Greg Hermann
• Intake manifold construction, intercoolers   Greg Hermann
• Spark plugs   Bruce
• D8 of DIY WB   rr
• Spark plugs   Greg Hermann
• gm idle valve   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Greg Hermann
• Spark plugs   Bruce
• Megasquirt Injector PWM   dave.johnson at gb.abb.com
• gm idle valve   Peter Gargano
• gm idle valve   Ludis Langens
• Frederic Breitwieser   Rausch, Bernd
• Spark plugs   bill.shurvinton at nokia.com
• SAAB variable compression   bill.shurvinton at nokia.com
• gm idle valve   ivan
• Intake manifold construction, intercoolers   Mos
• D8 of DIY WB   Kazuhisa Nishishita
• CVT (was:Intake manifold construction, intercoolers)   Programmer
• Intro,,,, Street Outlaw (NHRA) looking for Megasquirt EFI   powermaxx
• Spark plugs   bill.shurvinton at nokia.com
• Intake manifold construction, intercoolers   Huw Scourfield
• D8 of DIY WB   Brian Renegar
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Greg Hermann
• D8 of DIY WB   Kazuhisa Nishishita
• Spark plugs   Greg Hermann
• Intake manifold construction, intercoolers   Greg Hermann
• Intake manifold construction, intercoolers   bill.shurvinton at nokia.com
• Spark plugs   bill.shurvinton at nokia.com
• Spark plugs   Axel Rietschin
• Spark plugs   bill.shurvinton at nokia.com
• OBD 2 Connectors   Bob
• D8 of DIY WB   Schroeder, Ronald J
• OBD 2 Connectors   Bob
• gm idle valve   cmillard at crutchfield.com
• D8 of DIY WB   Schroeder, Ronald J
• gm idle valve   cmillard at crutchfield.com
• Spark plugs   Bob Tom
• Spark plugs   Bruce
• Spark plugs   Bob Tom
• Spark plugs   Bruce
• gm idle valve   Peter Gargano
• OBD 2 Connectors   Jason Wade
• gm idle valve   Peter Gargano
• Chevy 383 Stroker   Ken Richardson
• OBD 2 Connectors   Jason Wade
• Chevy 383 Stroker   Ken Richardson
• D8 of DIY WB   rr
• D8 of DIY WB   rr
• diy-wb works!   Jim Sloan
• diy-wb works!   Jim Sloan
• diy-wb works!   Bruce
• Chevy 383 Stroker   Joe Piche
• Chevy 383 Stroker   Joe Piche
• diy-wb works!   Bruce
• Intake manifold construction, intercoolers   Gary Schaumberg
• gm idle valve   Bruce
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Gary Schaumberg
• gm idle valve   Bruce
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Gary Schaumberg
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Gary Schaumberg
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Gary Schaumberg
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Gary Schaumberg
• Intake manifold construction, intercoolers   Bernd Felsche
• Thread drift (was: Intake manifold construction, intercoolers)   Bernd Felsche
• Intake manifold construction, intercoolers   Greg Hermann
• Thread drift (was: Intake manifold construction, intercoolers)   Bernd Felsche
• Intake manifold construction, intercoolers   Bernd Felsche
• Intake manifold construction, intercoolers   Greg Hermann
• Intake manifold construction, intercoolers   Greg Hermann
• Intake manifold construction, intercoolers   Greg Hermann
• Intake manifold construction, intercoolers   Greg Hermann
• Intake manifold construction, intercoolers   Greg Hermann
• Thread drift (was: Intake manifold construction, intercoolers)   Greg Hermann
• Intake manifold construction, intercoolers   Greg Hermann
• Intake manifold construction, intercoolers   Greg Hermann
• Thread drift (was: Intake manifold construction, intercoolers)   Greg Hermann
• Stroker surge - DIY_EFI Digest V5 #919   Clare Snyder
• Stroker surge - DIY_EFI Digest V5 #919   Clare Snyder
• Thread drift (was: Intake manifold construction, intercoolers)   Shannen Durphey
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Bernd Felsche
• Thread drift (was: Intake manifold construction, intercoolers)   Shannen Durphey
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Bernd Felsche
• Reasonably priced at 2 million dollars??   Shannen Durphey
• Intake manifold construction, intercoolers   Bernd Felsche
• Reasonably priced at 2 million dollars??   Bernd Felsche
• Reasonably priced at 2 million dollars??   Shannen Durphey
• Intake manifold construction, intercoolers   Bernd Felsche
• Reasonably priced at 2 million dollars??   Bernd Felsche
• Reasonably priced at 2 million dollars??   Shannen Durphey
• Reasonably priced at 2 million dollars??   Shannen Durphey
• MSD 6A   elcamino73
• MSD 6A   elcamino73
• Intake manifold construction, intercoolers   Jörgen Karlsson
• Intake manifold construction, intercoolers   Jörgen Karlsson
• Intake manifold construction, intercoolers   Igor Dorrestijn
• Intake manifold construction, intercoolers   Igor Dorrestijn
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Greg Hermann
• MSD 6A   Bruce
• Intake manifold construction, intercoolers   Greg Hermann
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction, intercoolers   Greg Hermann
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Greg Hermann
• MSD 6A   Bruce
• Intake manifold construction, intercoolers   Bruce
• diy-wb works!   Kevin _
• Intake manifold construction, intercoolers   Bruce
• PRV engine   Rausch, Bernd
• Intake manifold construction, intercoolers   Bruce
• diy-wb works!   Kevin _
• Intake manifold construction, intercoolers   Bruce
• PRV engine   Rausch, Bernd
• Intake manifold construction, intercoolers   Bruce
• Intake manifold construction (blah, blah, blah)   Jurgen Hartwig
• Intake manifold construction (blah, blah, blah)   Jurgen Hartwig
• diy-wb works!   rr
• diy-wb works!   rr
• diy-wb works!   Kevin _
• diy-wb works!   Kevin _
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Jon Davis
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Jon Davis
• Intake manifold construction (blah, blah, blah)   Stephen Andersen
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Bruce
• Intake manifold construction (blah, blah, blah)   Stephen Andersen
• Intake manifold construction (blah, blah, blah)   Bob - Uni
• Intake manifold construction (blah, blah, blah)   Bob - Uni
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Bruce
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Greg Hermann
• diy-wb works!   rr
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Greg Hermann
• diy-wb works!   rr
• diy-wb works!   Bruce
• Intake manifold construction (blah, blah, blah)   Bruce
• diy-wb works!   Bruce
• Intake manifold construction (blah, blah, blah)   Bruce
• diy-wb works!   Bruce
• diy-wb works!   Bruce
• WB proboscis   romans, mark
• WB proboscis   romans, mark
• DCOE/DHLA Ver. Efi   TVS
• diy-wb works!   Peter Gargano
• DCOE/DHLA Ver. Efi   TVS
• diy-wb works!   Peter Gargano
• gm idle valve   elcamino73
• gm idle valve   elcamino73
• NTC thermistor sensors   Brian Dessent
• NTC thermistor sensors   Brian Dessent
• NTC thermistor sensors   Peter Gargano
• NTC thermistor sensors   Peter Gargano
• WB proboscis   Bruce
• diy-wb works!   Bruce
• WB proboscis   Bruce
• DCOE/DHLA Ver. Efi   Greg Hermann
• diy-wb works!   Bruce
• diy-wb works!   Bruce
• DCOE/DHLA Ver. Efi   Greg Hermann
• diy-wb works!   Bruce
• gm idle valve   Bernd Felsche
• gm idle valve   Bernd Felsche
• NTC thermistor sensors   Bernd Felsche
• Thread drift (was: Intake manifold construction, intercoolers)   Gary Schaumberg
• DCOE tuning, was Spark plugs   The Dupuis
• NTC thermistor sensors   Bernd Felsche
• DCOE tuning, was Spark plugs   The Dupuis
• Thread drift (was: Intake manifold construction, intercoolers)   Gary Schaumberg
• gm idle valve   elcamino73
• diy-wb works!   elcamino73
• gm idle valve   elcamino73
• diy-wb works!   elcamino73
• Datalogging RPM signal   Stephen Andersen
• Thread drift (was: Intake manifold construction, intercoolers)   Bruce
• Datalogging RPM signal   Stephen Andersen
• Thread drift (was: Intake manifold construction, intercoolers)   Bruce
• diy-wb works!   Bruce
• diy-wb works!   Bruce
• Reasonably priced at 2 million dollars??   Gary Schaumberg
• Reasonably priced at 2 million dollars??   Gary Schaumberg
• Intake manifold construction (blah, blah, blah)   Gary Schaumberg
• Intake manifold construction (blah, blah, blah)   Gary Schaumberg
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Jon Davis
• Off Topic   Gary Schaumberg
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Jon Davis
• Off Topic   Gary Schaumberg
• killed projects (was Re: diy-wb works!)   Jon Davis
• killed projects (was Re: diy-wb works!)   Jon Davis
• diy-wb works!   bcroe at juno.com
• diy-wb works!   bcroe at juno.com
• diy-wb works!   Peter Gargano
• Sensor Question   Bob - Uni
• Sensor Question   Bob - Uni
• diy-wb works!   Peter Gargano
• diy-wb works!   elcamino73
• diy-wb works!   elcamino73
• Reasonably priced at 2 million dollars??   Mos
• What display for DIY WB   Con Torrisi
• What display for DIY WB   Con Torrisi
• Reasonably priced at 2 million dollars??   Mos
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Bruce
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Bruce
• diy-wb works!   Bruce
• diy-wb works!   Bruce
• diy-wb works!   Bruce
• diy-wb works!   Bruce
• Atomisation Re: Intake manifold construction, intercoolers   Mos
• diy-wb works!   Mark S. Riley
• Atomisation Re: Intake manifold construction, intercoolers   Mos
• diy-wb works!   Mark S. Riley
• Sensor Question   Greg Hermann
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Greg Hermann
• ION EYES   Greg Hermann
• Sensor Question   Greg Hermann
• Mass Market EFI (was: Intake manifold construction, intercoolers)   Greg Hermann
• ION EYES   Greg Hermann
• Datalogging RPM signal   Bill Shaw
• What display for DIY WB   Trey Keifer
• Datalogging RPM signal   Bill Shaw
• Fuel Atomisation   Greg Hermann
• What display for DIY WB   Trey Keifer
• Fuel Atomisation   Greg Hermann
• NTC thermistor sensors   rr
• What display for DIY WB   rr
• What display for DIY WB   rr
• NTC thermistor sensors   rr
• diy-wb works!   Peter Gargano
• What display for DIY WB   Peter Gargano
• Fuel Atomisation   Arnaud Westenberg
• diy-wb bar graph display   David Gregory
• diy-wb works!   Peter Gargano
• Fuel Atomisation   Arnaud Westenberg
• diy-wb bar graph display   David Gregory
• What display for DIY WB   Peter Gargano
• diy-wb bar graph display   Alvaro Gil
• diy-wb bar graph display   Peter Gargano
• diy-wb bar graph display   Alvaro Gil
• diy-wb bar graph display   Peter Gargano
• Fuel Atomisation   Greg Hermann
• Datalogging RPM signal   Don DRI05 Ricciardiello
• SPAM   Greg Hermann
• Fuel Atomisation   Bruce
• Fuel Atomisation   Greg Hermann
• SPAM   Greg Hermann
• Datalogging RPM signal   Don DRI05 Ricciardiello
• Fuel Atomisation   Bruce
• Fuel Atomisation   Arnaud Westenberg
• Fuel Atomisation   Arnaud Westenberg
• Carburetors and Altitude   efi_student
• Carburetors and Altitude   efi_student
• DIY_EFI Digest V5 #924   Clare Snyder
• DIY_EFI Digest V5 #924   Clare Snyder
• Sensor Question   Bob - Uni
• DIY_EFI Digest V5 #924   Clare Snyder
• DIY_EFI Digest V5 #924   Clare Snyder
• Fuel Atomisation   Bob - Uni
• Sensor Question   Bob - Uni
• Fuel Atomisation   Bob - Uni
• DCOE/DHLA Ver. Efi   Joe Beninca
• diy-wb bar graph display   Camden Lindsay
• diy-wb bar graph display   Camden Lindsay
• DCOE/DHLA Ver. Efi   Joe Beninca
• Fuel Atomisation   Bruce
• Fuel Atomisation   Bruce
• Datalogging RPM signal   Glen Beard
• Datalogging RPM signal   Glen Beard
• What display for DIY WB   bcroe at juno.com
• What display for DIY WB   bcroe at juno.com
• Fuel Atomisation   Bernd Felsche
• SPAM   Greg Hermann
• DIY_EFI Digest V5 #924   Bruce
• Trying to locate a page with sensor info..   powermaxx
• Fuel Atomisation   Bernd Felsche
• SPAM   Mos
• Fuel Atomisation   Bernd Felsche
• SPAM   Greg Hermann
• Trying to locate a page with sensor info..   powermaxx
• DIY_EFI Digest V5 #924   Bruce
• SPAM   Mos
• Fuel Atomisation   Bernd Felsche
• Fuel Atomisation   Bernd Felsche
• Fuel Atomisation   Greg Hermann
• Fuel Atomisation   Bernd Felsche
• Fuel Atomisation   Greg Hermann
• Sensor Question   Greg Hermann
• Fuel Atomisation   Bernd Felsche
• Fuel Atomisation   Greg Hermann
• Sensor Question   Greg Hermann
• Fuel Atomisation   Bernd Felsche
• Fuel Atomisation   Greg Hermann
• Fuel Atomisation   Bernd Felsche
• Carburetors and Altitude   Greg Hermann
• Fuel Atomisation   Bob - Uni
• Carburetors and Altitude   Greg Hermann
• Fuel Atomisation   Bernd Felsche
• Fuel Atomisation   Bob - Uni
• Datalogging RPM signal   Stephen Andersen
• SPAM   Bernd Felsche
• Fuel Atomisation   Bernd Felsche
• Fuel Atomisation   Greg Hermann
• diy-wb Vgnd   Bill Shaw
• Datalogging RPM signal   Stephen Andersen
• SPAM   Bernd Felsche
• Sensor Question   Bernd Felsche
• Fuel Atomisation   Greg Hermann
• diy-wb Vgnd   Bill Shaw
• Fuel Atomisation   Greg Hermann
• Fuel Atomisation   Bernd Felsche
• Fuel Atomisation   Greg Hermann
• Sensor Question   Bernd Felsche
• Autronic ECU and twin-spark   Chris Waltham
• Fuel Atomisation   Greg Hermann
• Fuel Atomisation   Greg Hermann
• diy-wb Vgnd   Peter Gargano
• Autronic ECU and twin-spark   Chris Waltham
• Fuel Atomisation   Greg Hermann
• diy-wb Vgnd   Peter Gargano
• SPAM   Greg Hermann
• Fuel Atomisation   Greg Hermann
• Thread drift (was: Intake manifold construction,   Dave Williams
• Mass Market EFI (was: Intake manifold construction,   Dave Williams
• Atomisation Re: Intake manifold construction, intercoolers   Dave Williams
• Autronic ECU and twin-spark   Greg Hermann
• Fuel Atomisation   Bernd Felsche
• Sensor Question   Peter Gargano
• SPAM   Greg Hermann
• Thread drift (was: Intake manifold construction,   Dave Williams
• Atomisation Re: Intake manifold construction, intercoolers   Dave Williams
• Autronic ECU and twin-spark   Greg Hermann
• SPAM   Bruce
• Mass Market EFI (was: Intake manifold construction,   Dave Williams
• Fuel Atomisation   Bernd Felsche
• Sensor Question   Peter Gargano
• Fuel Atomisation   Bernd Felsche
• SPAM   Bruce
• Fuel Atomisation   Bernd Felsche
• Sensor Question   Bernd Felsche
• Fuel Atomisation   Greg Hermann
• Fuel Atomisation, now just silliness   Bruce
• SPAM   Greg Hermann
• Sensor Question   Bruce
• Fuel Atomisation   Greg Hermann
• Sensor Question   Bernd Felsche
• Fuel Atomisation, now just silliness   Bruce
• SPAM   Greg Hermann
• Sensor Question   Bruce
• Thread drift (was: Intake manifold construction,, tooth fairy   Bruce
• Fuel Atomisation   David Gregory
• Fuel Atomisation   Bernd Felsche
• Cam position sensing w/o a cam sensor   Santi Udomkesmalee
• Thread drift (was: Intake manifold construction,, tooth fairy   Bruce
• Fuel Atomisation   Bernd Felsche
• Fuel Atomisation   David Gregory
• Cam position sensing w/o a cam sensor   Santi Udomkesmalee
• Sensor Question   Bob - Uni
• Sensor Question   Bernd Felsche
• SPAM   Bernd Felsche
• SPAM   Bernd Felsche
• Sensor Question   Bob - Uni
• Sensor Question   Bernd Felsche
• Off topic   Gary Schaumberg
• Mass Market EFI (was: Intake manifold construction,   Jon Davis
• SPAM   Bernd Felsche
• Sensor Question   Bruce
• SPAM   Bernd Felsche
• Fuel Atomisation   Bernd Felsche
• Off topic   Gary Schaumberg
• Sensor Question   Bruce
• Thread drift , tooth fairy   Gary Schaumberg
• Mass Market EFI (was: Intake manifold construction,   Jon Davis
• Fuel Atomisation   Bernd Felsche
• Thread drift , tooth fairy   Gary Schaumberg
• SPAM   Bruce
• Sensor Question   Bernd Felsche
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   clayb
• SPAM   Greg Hermann
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   clayb
• Sensor Question   Bernd Felsche
• SPAM   Greg Hermann
• SPAM   Bruce
• Atomisation Re: Intake manifold construction, intercoolers   Mos
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Bruce
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Bruce
• Atomisation Re: Intake manifold construction, intercoolers   Mos
• SPAM   Bernd Felsche
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Bernd Felsche
• SPAM   Bernd Felsche
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Bernd Felsche
• SPAM   Bernd Felsche
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Chris Waltham
• SPAM   Bernd Felsche
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Chris Waltham
• Autronic ECU and twin-spark   Bernd Felsche
• Autronic ECU and twin-spark   Bernd Felsche
• SPAM   944Technologist
• Thanks for the EFI!   Andrew R. Ghali
• SPAM   944Technologist
• SPAM   944Technologist
• Thanks for the EFI!   Andrew R. Ghali
• SPAM   Bernd Felsche
• SPAM   Bernd Felsche
• SPAM   944Technologist
• Seeking a little advice on EFI project   Ludis Langens
• Cam position sensing w/o a cam sensor   Ludis Langens
• AW: DIY_EFI Digest V5 #909   Ludis Langens
• Atomisation   bill.shurvinton at nokia.com
• Atomisation   bill.shurvinton at nokia.com
• AW: DIY_EFI Digest V5 #909   Ludis Langens
• Seeking a little advice on EFI project   Ludis Langens
• Thanks for the EFI! (off topic)   Rich M
• Cam position sensing w/o a cam sensor   Ludis Langens
• Fuel Atomisation   Arnaud Westenberg
• Thanks for the EFI! (off topic)   Rich M
• Fuel Atomisation   Arnaud Westenberg
• Fuel Atomisation   Arnaud Westenberg
• Fuel Atomisation   Arnaud Westenberg
• Autronic ECU and twin-spark   Jorgen Karlsson
• Sensor Question   Peter Florance
• DIY_EFI Digest V5 #926   Clare Snyder
• DIY_EFI Digest V5 #926   Clare Snyder
• Sensor Question   Peter Florance
• Autronic ECU and twin-spark   Jorgen Karlsson
• DIY_EFI Digest V5 #926   Clare Snyder
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Kevin Wright
• DIY_EFI Digest V5 #926   Clare Snyder
• SPAM   Kevin Wright
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Kevin Wright
• Thanks for the EFI! (off topic)   Kevin Wright
• SPAM   Kevin Wright
• Thanks for the EFI! (off topic)   Kevin Wright
• Atomisation   Greg Hermann
• Thanks for the EFI! (off topic)   skulte
• Atomisation   Greg Hermann
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Bruce
• Thanks for the EFI! (off topic)   skulte
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Bruce
• Atomisation   bill.shurvinton at nokia.com
• Sensor Question   Carter Shore
• Fuel Atomisation   Greg Hermann
• Sensor Question   Carter Shore
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Greg Hermann
• Fuel Atomisation   Greg Hermann
• Atomisation   bill.shurvinton at nokia.com
• SPAM   Greg Hermann
• Autronic ECU and twin-spark (and other unlikely ECU tasks)   Greg Hermann
• SPAM   Greg Hermann
• Turbo Chubby parts   Greg Hermann
• Turbo Chubby parts   Greg Hermann
• MAP Sensor   George Dickey
• Constipated Carb   Robert Harris
• MAP Sensor   George Dickey
• Constipated Carb   Robert Harris
• MAP Sensor   Peter Florance
• MAP Sensor   Peter Florance
• Atomization vs Vaporization   Robert Harris
• MAP Sensor   Robert Liu
• Atomization vs Vaporization   Jeffrey Engel
• MAP Sensor   Robert Liu
• Atomization vs Vaporization   Robert Harris
• DIY-WB PCB LAYOUT ERROR!!!   w.shawsr at att.net
• Atomization vs Vaporization   Jeffrey Engel
• DIY-WB PCB LAYOUT ERROR!!!   w.shawsr at att.net
• New EFI System   Scott_Hay at notes.toyota.com
• New EFI System   Scott_Hay at notes.toyota.com
• New EFI System   Bruce
• Turbo Chubby parts   Bruce
• Fuel Atomisation   Lasse Langwadt Christensen
• MAP Sensor   Bruce
• No Subject   owner-diy_efi at diy-efi.org
• New EFI System   Bruce
• DIY-WB PCB LAYOUT ERROR!!!   rr
• MAP Sensor   Bruce
• Fuel Atomisation   Lasse Langwadt Christensen
• No Subject   owner-diy_efi at diy-efi.org
• DIY-WB PCB LAYOUT ERROR!!!   rr
• Turbo Chubby parts   Bruce
• DIY-WB PCB LAYOUT ERROR!!!   Steve.Flanagan at VerizonWireless.com
• WB O2 Success   Neil.Poersch at mts.mb.ca
• DIY-WB PCB LAYOUT ERROR!!!   Dave Mumert
• DIY-WB PCB LAYOUT ERROR!!!   Steve.Flanagan at VerizonWireless.com
• Which WB O2 sensor is OK?   rob files
• WB O2 Success   Neil.Poersch at mts.mb.ca
• DIY-WB PCB LAYOUT ERROR!!!   Dave Mumert
• Which WB O2 sensor is OK?   Bruce
• Which WB O2 sensor is OK?   rob files
• Which WB O2 sensor is OK?   Peter Gargano
• Which WB O2 sensor is OK?   rob files
• Which WB O2 sensor is OK?   Bruce
• EFI Information   CJYoungDET at aol.com
• Which WB O2 sensor is OK?   rob files
• MAP Sensor   Tony Bryant
• Sensor Question   Andrew Theurer
• EFI Information   CJYoungDET at aol.com
• Which WB O2 sensor is OK?   Peter Gargano
• Sensor Question   Bruce
• EFI Information   Bruce
• MAP Sensor   Tony Bryant
• Sensor Question   Andrew Theurer
• Which WB O2 sensor is OK?   Jacky Chu
• EFI Information   Bruce
• Which WB O2 sensor is OK?   Kevin _
• Which WB O2 sensor is OK?   Jacky Chu
• Sensor Question   Bruce
• Which WB O2 sensor is OK?   Kevin _
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• LM1815; distributor hall sender sensing   Stephen Webb
• WB assembly help   akallotte at juno.com
• Shock Sensor Question   steve ravet
• WB O2 Success   rr
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• EFI Information   Huw Scourfield
• LM1815; distributor hall sender sensing   Stephen Webb
• WB O2 Success   Steve.Flanagan at VerizonWireless.com
• WB assembly help   akallotte at juno.com
• WB O2 Success   rr
• Shock Sensor Question   steve ravet
• EFI Information   Huw Scourfield
• WB O2 Success   Steve.Flanagan at VerizonWireless.com
• EFI Information   Bruce
• WB O2 Success   Kevin _
• LM1815; distributor hall sender sensing   Rich M
• Shock Sensor Question   Eric Aos
• WB assembly help   Peter Gargano
• WB O2 Success   Bruce
• Shock Sensor Question   Eric Aos
• LM1815; distributor hall sender sensing   Rich M
• Reasonably priced at 2 million dollars??   Shannen Durphey
• WB O2 Success   Kevin _
• WB O2 Success   Bruce
• WB assembly help   Peter Gargano
• EFI Information   Bruce
• Which WB O2 sensor is OK?   efi_student
• Shock Sensor Question   Programmer
• Reasonably priced at 2 million dollars??   Shannen Durphey
• Which WB O2 sensor is OK?   efi_student
• LM1815; distributor hall sender sensing   Peter Florance
• Shock Sensor Question   Programmer
• Thanks for the EFI! (off topic)   elcamino73
• DIY-WB PCB LAYOUT ERROR!!!   Jess Gypin
• LM1815; distributor hall sender sensing   Peter Florance
• Which WB O2 sensor is OK?   Brian L Massey
• Thanks for the EFI! (off topic)   elcamino73
• DIY-WB PCB LAYOUT ERROR!!!   Jess Gypin
• Which WB O2 sensor is OK?   Brian L Massey
• Which WB O2 sensor is OK?   Bruce
• Shock Sensor Question   Bernd Felsche
• Which WB O2 sensor is OK?   Bruce
• Reasonably priced at 2 million dollars??   efi_student
• Shock Sensor Question   Bernd Felsche
• DIY-WB PCB LAYOUT ERROR!!!   Bill Shaw
• DIY-WB PCB LAYOUT ERROR!!!   Bill Shaw
• Reasonably priced at 2 million dollars??   efi_student
• Starter Tooth Sensor Question   bcroe at juno.com
• 76-79 Cad port injection EFI   bcroe at juno.com
• WB assembly help   akallotte at juno.com
• 76-79 Cad port injection EFI   bcroe at juno.com
• MAP Sensor   Stephen Andersen
• Starter Tooth Sensor Question   bcroe at juno.com
• WB assembly help   akallotte at juno.com
• Starter Tooth Sensor Question   Peter Gargano
• MAP Sensor   Stephen Andersen
• WB assembly help   Peter Gargano
• MAP Sensor   CJYoungDET at aol.com
• Starter Tooth Sensor Question   Peter Gargano
• Sensor Question   Bob - Uni
• WB assembly help   Peter Gargano
• MAP Sensor   CJYoungDET at aol.com
• Sensor Question   Bob - Uni
• Reasonably priced at 2 million dollars??   Bob - Uni
• MAP Sensor   Bruce
• SPAM [and how does apply to DIY_EFI??]   Daniel and Laura Burk
• Reasonably priced at 2 million dollars??   Bob - Uni
• Shock Sensor Question   Carter Shore
• Steve's Parts Kit   Daniel and Laura Burk
• MAP Sensor   Bruce
• SPAM [and how does apply to DIY_EFI??]   Daniel and Laura Burk
• Reasonably priced at 2 million dollars??   Shannen Durphey
• Thanks for the EFI! (off topic)   Daniel and Laura Burk
• Reasonably priced at 2 million dollars??   Andrew Theurer
• MSD 6A   Daniel and Laura Burk
• Steve's Parts Kit   Daniel and Laura Burk
• Shock Sensor Question   Carter Shore
• Shock Sensor Question   Bernd Felsche
• Thanks for the EFI! (off topic)   Daniel and Laura Burk
• Reasonably priced at 2 million dollars??   Shannen Durphey
• Reasonably priced at 2 million dollars??   Andrew Theurer
• Shock Sensor Question   Bernd Felsche
• MSD 6A   Daniel and Laura Burk
• Turbo Chubby parts   Bob Wooten
• Turbo Chubby parts   Bruce
• Turbo Chubby parts   Bob Wooten
• WB O2 Success   Mark S. Riley
• Turbo Chubby parts   Bruce
• Turbo Chubby parts   Bruce
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Andris Skulte
• Turbo Chubby parts   Bob Wooten
• Turbo Chubby parts   Bob Wooten
• WB Requests   bcroe at juno.com
• Turbo Chubby parts   Bruce
• WB O2 Success   Mark S. Riley
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Andris Skulte
• Turbo Chubby parts   Bob Wooten
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bruce
• WB Requests   bcroe at juno.com
• Turbo Chubby parts   Bruce
• Turbo Chubby parts   Bob Wooten
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bob Wooten
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bruce
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bruce
• Turbo Chubby parts   Bruce
• Turbo Chubby parts   Bob Wooten
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bob Wooten
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bob Wooten
• WB Requests   Bryon Hargis
• Turbo Chubby parts   Greg Hermann
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bruce
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bob Wooten
• Turbo Chubby parts   Bob Wooten
• Starter Tooth Sensor Question   bcroe at juno.com
• Turbo Chubby parts   Greg Hermann
• WB Requests   Bryon Hargis
• Starter Tooth Sensor Question   bcroe at juno.com
• Photoelectric timing gates   James Ballenger
• Photoelectric timing gates   James Ballenger
• Atomisation   Dave Williams
• Atomisation   Dave Williams
• Turbo Chubby parts   Bernd Felsche
• Turbo Chubby parts   Bernd Felsche
• Atomisation Re: Intake manifold construction, intercoolers   Dave Williams
• WB assembly help   Phil Hunter
• Atomisation Re: Intake manifold construction, intercoolers   Dave Williams
• WB assembly help   Phil Hunter
• Atomisation   bill.shurvinton at nokia.com
• Atomisation   bill.shurvinton at nokia.com
• Atomisation   Rich M
• Atomisation   Rich M
• Shock Sensor Question   Brian Dessent
• Shock Sensor Question   Brian Dessent
• WB Requests   George Dickey
• WB Requests   George Dickey
• WB Requests   Jess Gypin
• MAP Sensor   Stephen Andersen
• MAP Sensor   Stephen Andersen
• WB Requests   Jess Gypin
• Starter Tooth Sensor Question   Bernd Felsche
• Turbo Chubby parts   Bruce
• Atomisation   Bruce
• Starter Tooth Sensor Question   Bernd Felsche
• Turbo Chubby parts   Bruce
• Atomisation   Bruce
• Turbo Chubby parts   Greg Hermann
• WB assembly help   Steve.Flanagan at VerizonWireless.com
• Starter Tooth Sensor Question   Greg Hermann
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• WB assembly help   Steve.Flanagan at VerizonWireless.com
• Turbo Chubby parts   Greg Hermann
• Starter Tooth Sensor Question   Greg Hermann
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• Atomization vs Vaporization   Steve.Flanagan at VerizonWireless.com
• Atomisation   bill.shurvinton at nokia.com
• Atomization vs Vaporization   Steve.Flanagan at VerizonWireless.com
• Atomisation   bill.shurvinton at nokia.com
• WB Requests   Andrew Theurer
• WB Requests   Andrew Theurer
• Atomization vs Vaporization   Greg Hermann
• Shock Sensor Question   steve ravet
• Which WB O2 sensor is OK?   Steve.Flanagan at VerizonWireless.com
• Water Injection   Robert Harris
• DIY EFI   Huw Scourfield
• Which WB O2 sensor is OK?   Steve.Flanagan at VerizonWireless.com
• Atomization vs Vaporization   Greg Hermann
• Shock Sensor Question   steve ravet
• WB Requests   Bruce
• WB O2 Success   Steve.Flanagan at VerizonWireless.com
• Water Injection   Robert Harris
• WB Requests   Bruce
• WB O2 Success   Steve.Flanagan at VerizonWireless.com
• DIY EFI   Huw Scourfield
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Perry, Scott
• Atomisation   Bruce
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Bruce
• Atomisation   Dave Williams
• Atomisation   Bruce
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Perry, Scott
• Atomisation   Dave Williams
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Bruce
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Perry, Scott
• DIY EFI   Bruce
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Bruce
• Atomisation   Ron Schroeder
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Bruce
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Perry, Scott
• WB O2 Success   Mark S. Riley
• DIY EFI   Bruce
• Atomisation   Ron Schroeder
• WB O2 Success   Mark S. Riley
• Which WB O2 sensor is OK?   rr
• WB O2 Success   Don DRI05 Ricciardiello
• WB O2 Success   Don DRI05 Ricciardiello
• Which WB O2 sensor is OK?   rr
• Datalogging RPM signal   Stephen Andersen
• diy-wb bar graph display   Orin
• Datalogging RPM signal   Stephen Andersen
• diy-wb bar graph display   Orin
• Audi DI   bill.shurvinton at nokia.com
• Turbo Chubby parts   Bruce
• Sensor Question   Orin
• Water Injection   rr
• Starter Tooth Sensor Question   rr
• Datalogging RPM signal   A79coupe at aol.com
• Starter Tooth Sensor Question   Orin
• [ADMIN] Off topic posts   Orin
• Sensor Question   Orin
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• diy-wb bar graph display   David Gregory
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Jeff Meager
• diy-wb bar graph display   Peter Gargano
• diy-wb calibration with NB   bcroe at juno.com
• Starter Tooth Sensor Question   bcroe at juno.com
• Turbo Chubby parts   elcamino73
• Turbo Chubby parts   elcamino73
• Atomisation   Dave Williams
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• WB Requests   Jess Gypin
• Extrude Hone machine on eBay   Carter Shore
• another WB O2 sucess   Tim Skwiot
• Turbo Chubby parts   Bob Wooten
• DIY_EFI Digest V5 #926   Jon Davis
• Turbo Chubby parts   Bob Wooten
• Water Injection   Bob Wooten
• DIY_WB inquiry (be gentle)   John & Meleaia McClure
• Atomisation Re: Intake manifold construction, intercoolers   Mos
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   efi_student
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Jeff Meager
• [ADMIN] Off topic posts   Orin
• diy-wb bar graph display   David Gregory
• Starter Tooth Sensor Question   Orin
• Starter Tooth Sensor Question   rr
• Sensor Question   Orin
• Sensor Question   Orin
• Datalogging RPM signal   A79coupe at aol.com
• Audi DI   bill.shurvinton at nokia.com
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• Water Injection   rr
• diy-wb bar graph display   Peter Gargano
• Starter Tooth Sensor Question   bcroe at juno.com
• Turbo Chubby parts   elcamino73
• Turbo Chubby parts   elcamino73
• Atomisation   Dave Williams
• Turbo Chubby parts   Bruce
• DIY_EFI Digest V5 #926   Jon Davis
• Extrude Hone machine on eBay   Carter Shore
• another WB O2 sucess   Tim Skwiot
• diy-wb calibration with NB   bcroe at juno.com
• DIY_WB inquiry (be gentle)   John & Meleaia McClure
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• WB Requests   Jess Gypin
• Atomisation Re: Intake manifold construction, intercoolers   Mos
• Turbo Chubby parts   Bob Wooten
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   efi_student
• Water Injection   Bob Wooten
• Turbo Chubby parts   Bob Wooten
• diy-wb bar graph display   Orin
• Which WB O2 sensor is OK and Wiring Qs   efi_student
• Bruce have you seen this site?   elcamino73
• 76-79 Cad port injection EFI   Kevin Wright
• is an updated fuel injector list available anywhere   Jason Haines
• Bosch peak and hold injectors   Jason Haines
• WB O2 Success   Neil.Poersch at mts.mb.ca
• WB O2 Success   Neil.Poersch at mts.mb.ca
• Tuning for F1   Bruce
• Starter Tooth Sensor Question   Bruce
• Turbo Chubby parts   Bruce
• Turbo Chubby parts   Bruce
• Sensor Question (and the usefulness of cam sensors)   James Montebello
• DIY-WB meter.. from DSE?   Wing Gee
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Bruce
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Todd Danielson
• diy-wb bar graph display   David Randall
• DIY_WB inquiry (be gentle)   Programmer
• DIY_WB inquiry (be gentle)   Greg Hermann
• Turbo Chubby parts   Greg Hermann
• Starter Tooth Sensor Question   bcroe at juno.com
• Shock Sensor Question   Bernd Felsche
• 76-79 Cad port injection EFI   Kevin Wright
• WB O2 Success   Neil.Poersch at mts.mb.ca
• Which WB O2 sensor is OK and Wiring Qs   efi_student
• Bosch peak and hold injectors   Jason Haines
• Bruce have you seen this site?   elcamino73
• diy-wb bar graph display   Orin
• Starter Tooth Sensor Question   Bruce
• Tuning for F1   Bruce
• is an updated fuel injector list available anywhere   Jason Haines
• Turbo Chubby parts   Bruce
• WB O2 Success   Neil.Poersch at mts.mb.ca
• Turbo Chubby parts   Bruce
• Sensor Question (and the usefulness of cam sensors)   James Montebello
• DIY-WB meter.. from DSE?   Wing Gee
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Bruce
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Todd Danielson
• Starter Tooth Sensor Question   bcroe at juno.com
• DIY_WB inquiry (be gentle)   Greg Hermann
• Shock Sensor Question   Bernd Felsche
• DIY_WB inquiry (be gentle)   Programmer
• diy-wb bar graph display   David Randall
• Turbo Chubby parts   Greg Hermann
• [Admin] Delays in posts showing up   Orin
• Turbo Chubby parts   Bruce
• Which WB O2 sensor is OK and Wiring Qs   elcamino73
• Bosch peak and hold injectors   elcamino73
• is an updated fuel injector list available anywhere   Programmer
• Starter Tooth Sensor Question   Programmer
• Turbo Chubby parts   Raymond Brantley
• DIY_EFI Digest V5 #937   PorscheRcr at aol.com
• Which WB O2 sensor is OK and Wiring Qs   Bruce
• Which WB O2 sensor is OK and Wiring Qs   Bruce
• [Admin] Delays in posts showing up   Orin
• Bosch peak and hold injectors   elcamino73
• DIY_EFI Digest V5 #937   PorscheRcr at aol.com
• Which WB O2 sensor is OK and Wiring Qs   elcamino73
• Turbo Chubby parts   Raymond Brantley
• is an updated fuel injector list available anywhere   Programmer
• Turbo Chubby parts   Bruce
• Starter Tooth Sensor Question   Programmer
• Turbo Chubby parts   Bruce
• DIY_WB inquiry (be gentle)   Bruce
• Which WB O2 sensor is OK and Wiring Qs   Gary Schaumberg
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Andris Skulte
• O2 Sensor Meter Hookup   CJYoungDET at aol.com
• Water Injection   Bruce
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bruce
• Turbo Chubby parts   Bruce
• Starter Tooth Sensor Question   Orin
• Water Injection   944Technologist
• Atomisation   bill.shurvinton at nokia.com
• AW: Bosch peak and hold injectors   Rausch, Bernd
• Water Injection   944Technologist
• Starter Tooth Sensor Question   Orin
• Water Injection   Bruce
• Which WB O2 sensor is OK and Wiring Qs   Gary Schaumberg
• O2 Sensor Meter Hookup   CJYoungDET at aol.com
• Turbo Chubby parts   Bruce
• Turbo Chubby parts   Bruce
• DIY_WB inquiry (be gentle)   Bruce
• Atomisation   bill.shurvinton at nokia.com
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bruce
• AW: Bosch peak and hold injectors   Rausch, Bernd
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Andris Skulte
• Sensor Question (and the usefulness of cam sensors)   Bruce
• DIY_EFI Digest V5 #937   Dave Williams
• Turbo Chubby parts   Greg Hermann
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Steve.Flanagan at VerizonWireless.com
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• DIY_EFI Digest V5 #937   Kevin Wright
• new to the list   adam.bahret at vsea.com
• O2 Sensor Meter Hookup   Rich M
• WB O2 Board and Kit availability   Jonathan D Stauffer
• DIY_EFI Digest V5 #937   Bruce
• O2 Sensor Meter Hookup   Bruce
• new to the list   adam.bahret at vsea.com
• DIY_EFI Digest V5 #937   Dave Williams
• Sensor Question (and the usefulness of cam sensors)   Bruce
• Turbo Chubby parts   Greg Hermann
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   Steve.Flanagan at VerizonWireless.com
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• DIY_EFI Digest V5 #937   Kevin Wright
• WB O2 Board and Kit availability   Jonathan D Stauffer
• DIY_EFI Digest V5 #937   Bruce
• O2 Sensor Meter Hookup   Bruce
• Turbo Chubby parts   Bruce
• Which WB O2 sensor is OK and Wiring Qs   efi_student
• O2 Sensor Meter Hookup   Bruce
• Which WB O2 sensor is OK?   efi_student
• Fo Orin: Starter Tooth Sensor Question   Greg Hermann
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   efi_student
• Shock Sensor Question   Brian Dessent
• new to the list   Greg Hermann
• Fo Orin: Starter Tooth Sensor Question   Orin
• Fo Orin: Starter Tooth Sensor Question   Orin
• new to the list   Greg Hermann
• Which WB O2 sensor is OK and Wiring Qs   efi_student
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• Fo Orin: Starter Tooth Sensor Question   Greg Hermann
• O2 Sensor Meter Hookup   Bruce
• Turbo Chubby parts   Bruce
• Shock Sensor Question   Brian Dessent
• Which WB O2 sensor is OK?   efi_student
• O2 Sensor Meter Hookup   Rich M
• DIY Wideband Completed Pictures and Calibrating Resistor ?s   efi_student
• DIY_EFI Digest V5 #940   Robert Harris
• Turbo Chubby parts   Bob Wooten
• Water Injection   Bob Wooten
• diy-wb bar graph display   bcroe at juno.com
• Starter Teeth Sensor   bcroe at juno.com
• WB O2 Wiring Qs   bcroe at juno.com
• Holley ECU to GM ECU?   Lance
• Sensor Question (and the usefulness of cam sensors)   clayb
• Which WB O2 sensor is OK and Wiring Qs   efi_student
• First wb_lcd pic   Bill Shaw
• Starter Tooth Sensor Question   Programmer
• New to group   Richie Austin
• Operating temp Question   Bob Wooten
• V8s in places they didn't come in   PorscheRcr at aol.com
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Dave Williams
• Shock Sensor Question   Bernd Felsche
• HTML in posts   Rich M
• Shock Sensor Question   Bernd Felsche
• First wb_lcd pic   Bill Shaw
• New to group   Richie Austin
• WB O2 Wiring Qs   bcroe at juno.com
• Starter Teeth Sensor   bcroe at juno.com
• DIY_EFI Digest V5 #940   Robert Harris
• Which WB O2 sensor is OK and Wiring Qs   efi_student
• Holley ECU to GM ECU?   Lance
• diy-wb bar graph display   bcroe at juno.com
• Operating temp Question   Bob Wooten
• Sensor Question (and the usefulness of cam sensors)   clayb
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Dave Williams
• Turbo Chubby parts   Bob Wooten
• V8s in places they didn't come in   PorscheRcr at aol.com
• HTML in posts   Rich M
• Water Injection   Bob Wooten
• Starter Tooth Sensor Question   Programmer
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• Starter Teeth Sensor   Bernd Felsche
• Cam position sensing w/o a cam sensor   James Ballenger
• Starter Teeth Sensor   skulte
• Operating temp Question   Shannen Durphey
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• Starter Tooth Sensor Question   Carter Shore
• Which WB O2 sensor is OK and Wiring Qs   adam.bahret at vsea.com
• First wb_lcd pic   Nic van der Walt
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• Starter Teeth Sensor   Bernd Felsche
• Which WB O2 sensor is OK and Wiring Qs   adam.bahret at vsea.com
• First wb_lcd pic   Nic van der Walt
• Starter Teeth Sensor   skulte
• Starter Tooth Sensor Question   Carter Shore
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• Cam position sensing w/o a cam sensor   James Ballenger
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• Operating temp Question   Shannen Durphey
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• Operating temp Question   Kevin Grover
• Operating temp Question   Programmer
• Starter Tooth Sensor Question   rr
• Sensor Question (and the usefulness of cam sensors)   Bruce
• Shock Sensor Question   Jon Snoddy
• Operating temp Question   Bruce
• Starter Teeth Sensor   Greg Hermann
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• When ION's daddy was a gleam in the mailmans eye   Robert Harris
• Shock Sensor Question   Brian Dessent
• Operating temp Question   Programmer
• Sensor Question (and the usefulness of cam sensors)   Bruce
• Starter Teeth Sensor   Greg Hermann
• When ION's daddy was a gleam in the mailmans eye   Robert Harris
• Operating temp Question   Bruce
• Shock Sensor Question   Brian Dessent
• Shock Sensor Question   Jon Snoddy
• Fo Orin: Starter Tooth Sensor Question   Camden Lindsay
• Operating temp Question   steve ravet
• WB 02, get here.... (was: RE: Which WB O2 sensor is OK and   Brian Renegar
• DIY_EFI Digest V5 #937   William Shurvinton
• Another, better   Bruce
• Starter Tooth Sensor Question   rr
• Which WB O2 sensor is OK and Wiring Qs   Camden Lindsay
• Operating temp Question   Kevin Grover
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• Another, better   Bruce
• Which WB O2 sensor is OK and Wiring Qs   Camden Lindsay
• Fo Orin: Starter Tooth Sensor Question   Camden Lindsay
• WB 02, get here.... (was: RE: Which WB O2 sensor is OK and   Brian Renegar
• Operating temp Question   steve ravet
• DIY_EFI Digest V5 #937   William Shurvinton
• Fo Orin: Starter Tooth Sensor Question   Orin
• DIY_WB Data logging?   John & Meleaia McClure
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• Home for an injector   Bruce
• WB 02, get here.... (was: RE: Which WB O2 sensor is OK and Wiring Qs)   Bruce
• WB O2 sensor versions??   The Punisher
• Operating temp Question   Shannen Durphey
• Shock Sensor Question   Bernd Felsche
• DIY_EFI Digest V5 #940   gape
• Starter Teeth Sensor   Bernd Felsche
• Operating temp Question   Bob Wooten
• Operating temp Question   Bob Wooten
• Operating temp Question   Greg Hermann
• DIY_EFI Digest V5 #937   Bob - Uni
• Operating temp Question   Bob Wooten
• Starter Teeth Sensor   Bernd Felsche
• Fo Orin: Starter Tooth Sensor Question   Orin
• DIY_EFI Digest V5 #940   gape
• Shock Sensor Question   Bernd Felsche
• WB O2 sensor versions??   The Punisher
• Operating temp Question   Shannen Durphey
• DIY_WB Data logging?   John & Meleaia McClure
• Operating temp Question   Greg Hermann
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• WB 02, get here.... (was: RE: Which WB O2 sensor is OK and Wiring Qs)   Bruce
• DIY_EFI Digest V5 #937   Bob - Uni
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• Home for an injector   Bruce
• Operating temp Question   Bob Wooten
• DIY_WB Data logging?   Bruce
• Sensor Question (and the usefulness of cam sensors)   clayb
• Operating temp Question   Bruce
• Newish Member Post   Chris McKinnon
• Sensor Question (and the usefulness of cam sensors)   Jon Davis
• Starter Teeth Sensor   bcroe at juno.com
• Gauge Question   bcroe at juno.com
• DIY_WB Data logging?   The Punisher
• Home for an injector   William Shurvinton
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• DIY_WB Data logging?   Bruce
• DIY_WB Data logging?   The Punisher
• Sensor Question (and the usefulness of cam sensors)   clayb
• Newish Member Post   Chris McKinnon
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• Home for an injector   William Shurvinton
• Gauge Question   bcroe at juno.com
• Operating temp Question   Bruce
• Starter Teeth Sensor   bcroe at juno.com
• Sensor Question (and the usefulness of cam sensors)   Jon Davis
• WB O2 sensor versions??   rr
• DIY_WB Data logging?   rr
• DIY_EFI Digest V5 #944   Carter Shore
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• Single-board computer   Mark Chauvin
• Home for an injector   Dave Williams
• Home for an injector   Guy Hammer
• Shock Sensor Question   Phil Hunter
• Shock Sensor Question   Phil Hunter
• Operating temp Question   Bob Wooten
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bob Wooten
• Single-board computer   Mark Chauvin
• Operating temp Question   Bob Wooten
• Shock Sensor Question   Phil Hunter
• Home for an injector   Dave Williams
• WB O2 sensor versions??   rr
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• Shock Sensor Question   Phil Hunter
• DIY_WB Data logging?   rr
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Bob Wooten
• DIY_EFI Digest V5 #944   Carter Shore
• Home for an injector   Guy Hammer
• DIY_WB Data logging?   EFI Schott
• Audio datalogging (was Re: Shock Sensor Question)   Phil Hunter
• Brain Zit on Mushroom Lifter Cam Mfgr. !!   Greg Hermann
• Sensor Question (and the usefulness of cam sensors)   efi_student
• Sensor Question (and the usefulness of cam sensors)   Bruce
• need that cool F-1 sound   The Punisher
• Newish Member Post   Guy Hammer
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Shannen Durphey
• Single-board computer   Peter Gargano
• Home for an injector   Bruce
• Home for an injector   WEG1192 at aol.com
• Home for an injector   Greg Hermann
• any javascript experts out there?   steve ravet
• DIY_WB Data logging?   EFI Schott
• Sensor Question (and the usefulness of cam sensors)   efi_student
• Sensor Question (and the usefulness of cam sensors)   Bruce
• Brain Zit on Mushroom Lifter Cam Mfgr. !!   Greg Hermann
• need that cool F-1 sound   The Punisher
• Newish Member Post   Guy Hammer
• Audio datalogging (was Re: Shock Sensor Question)   Phil Hunter
• Home for an injector   Bruce
• any javascript experts out there?   steve ravet
• Home for an injector   WEG1192 at aol.com
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Shannen Durphey
• Single-board computer   Peter Gargano
• Home for an injector   Greg Hermann
• DIY_EFI Digest V5 #944   William Shurvinton
• Single-board computer   Leon Rathburn
• Home for an injector   elcamino73
• Newish Member Post   Phil Hunter
• DIY_WB Data logging?   Phil Hunter
• WBO2 testing   Glen Beard
• DIY_EFI Digest V5 #944   William Shurvinton
• Home for an injector   elcamino73
• Newish Member Post   Phil Hunter
• DIY_WB Data logging?   Phil Hunter
• Single-board computer   Leon Rathburn
• WBO2 testing   Glen Beard
• Newish Member Post   Shirley, Mark R
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Mark S. Riley
• Cam position sensing w/o a cam sensor   Craig Dotson
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• any javascript experts out there?   Jon Snoddy
• Introduction and "DIY turbo" list?   Obie Fayth
• WBO2 testing   Bruce
• DIY_EFI Digest V5 #944   Dave Williams
• Newish Member Post   Chris McKinnon
• Newish Member Post   Chris McKinnon
• any javascript experts out there?   Jon Snoddy
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• DIY_EFI Digest V5 #944   Dave Williams
• Introduction and "DIY turbo" list?   Obie Fayth
• Newish Member Post   Shirley, Mark R
• Shock Sensor Question   Steve.Flanagan at VerizonWireless.com
• Cam position sensing w/o a cam sensor   Craig Dotson
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Mark S. Riley
• WBO2 testing   Bruce
• Newish Member Post   Chris McKinnon
• Hello.   Derek Dawson
• Datalogging RPM signal   Porter, Bill
• DIY_EFI Digest V5 #944   Don Berry
• Maximum Piston Speed   yahoo
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• Air Temp effects on Atomization????   Tom Sharpe
• Home for an injector   elcamino73
• WB O2 Display   Fran and Bud
• Maximum Piston Speed   yahoo
• Newish Member Post   Chris McKinnon
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• Home for an injector   elcamino73
• Air Temp effects on Atomization????   Tom Sharpe
• Hello.   Derek Dawson
• DIY_EFI Digest V5 #944   Don Berry
• Datalogging RPM signal   Porter, Bill
• WB O2 Display   Fran and Bud
• Home for an injector   The Dupuis
• WBO2 testing   bcroe at juno.com
• Newish Member Post   Bernd Felsche
• LPG Injection.   Phil Lamovie
• Trying To Access Website   David Goldstein
• Shock Sensor Question   Brian Dessent
• any javascript experts out there?   Shannen Durphey
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• Introduction and "DIY turbo" list?   Shirley, Mark R
• Shock Sensor Question   Igor Dorrestijn
• Shock Sensor Question   Igor Dorrestijn
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   elcamino73
• any javascript experts out there?   Shannen Durphey
• Trying To Access Website   David Goldstein
• Introduction and "DIY turbo" list?   Shirley, Mark R
• Home for an injector   The Dupuis
• WBO2 testing   bcroe at juno.com
• LPG Injection.   Phil Lamovie
• Newish Member Post   Bernd Felsche
• Shock Sensor Question   Brian Dessent
• Introduction and "DIY turbo" list?   Greg Hermann
• Single-board computer   w.shawsr at att.net
• WBO2 testing   w.shawsr at att.net
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• Newish Member Post   Programmer
• WBO2 testing   rr
• VSS and DRAC questions   Mark S. Riley
• WBO2 testing   Glen Beard
• Sensor Question (and the usefulness of cam sensors)   clayb
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• Yet another archive script.   Daniel Houlton
• WBO2 testing ... (What I see)   Richard Alan Evans
• Maximum Piston Speed   elcamino73
• Home for an injector   Bruce
• Introduction and "DIY turbo" list?   Greg Hermann
• Home for an injector   Bruce
• WBO2 testing   rr
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• Yet another archive script.   Daniel Houlton
• Maximum Piston Speed   elcamino73
• Newish Member Post   Programmer
• VSS and DRAC questions   Mark S. Riley
• WBO2 testing   w.shawsr at att.net
• Single-board computer   w.shawsr at att.net
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• Sensor Question (and the usefulness of cam sensors)   clayb
• WBO2 testing   Glen Beard
• WBO2 testing ... (What I see)   Richard Alan Evans
• Newish Member Post   Dan Zorde
• MAP Sensor   Bryan Zublin
• LPG Injection.   Chris McKinnon
• Heat Sinks for WB was RE: WBO2 testing   Stephen Andersen
• WB O2 Sensor Connector   Bryan Zublin
• DIY_EFI Digest V5 #948   David Hunt
• Rotor profile. Re: Cam position sensing w/o a cam sensor   Mos
• Maximum Piston Speed   Leon Rathburn
• CVT (was:Intake manifold construction, intercoolers)   Tom Sharpe
• Datalogging RPM signal   Glen Beard
• WBO2 testing   Glen Beard
• Maximum Piston Speed   Bruce
• Trying To Access Website   Bruce
• WB O2 Display   Bruce
• Starter Teeth Sensor   Bruce
• PWM an electromagnetic (A/C) clutch?   Bob Wooten
• Newish Member Post   Dan Zorde
• WB O2 Display   Bruce
• WB O2 Sensor Connector   Bryan Zublin
• Heat Sinks for WB was RE: WBO2 testing   Stephen Andersen
• Starter Teeth Sensor   Bruce
• Rotor profile. Re: Cam position sensing w/o a cam sensor   Mos
• Datalogging RPM signal   Glen Beard
• MAP Sensor   Bryan Zublin
• DIY_EFI Digest V5 #948   David Hunt
• Trying To Access Website   Bruce
• Maximum Piston Speed   Bruce
• LPG Injection.   Chris McKinnon
• CVT (was:Intake manifold construction, intercoolers)   Tom Sharpe
• Maximum Piston Speed   Leon Rathburn
• WBO2 testing   Glen Beard
• PWM an electromagnetic (A/C) clutch?   Bob Wooten
• AW: Introduction and "DIY turbo" list?   Rausch, Bernd
• PWM an electromagnetic (A/C) clutch?   Shannen Durphey
• PWM an electromagnetic (A/C) clutch?   Mos
• VSS and DRAC questions   Shannen Durphey
• Yet another archive script.   George Dickey
• PWM an electromagnetic (A/C) clutch?   Stephen Andersen
• Home for an injector   Stephen Andersen
• Turbo groups answer   Trans Am Temple
• Maximum Piston Speed   skulte
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Mark S. Riley
• WBO2 testing ... (What I see)   Glen Beard
• Introduction and "DIY turbo" list?   Erik Quackenbush
• Maximum Piston Speed   skulte
• Yet another archive script.   George Dickey
• Turbo groups answer   Trans Am Temple
• Home for an injector   Stephen Andersen
• Introduction and "DIY turbo" list?   Erik Quackenbush
• PWM an electromagnetic (A/C) clutch?   Mos
• PWM an electromagnetic (A/C) clutch?   Shannen Durphey
• PWM an electromagnetic (A/C) clutch?   Stephen Andersen
• VSS and DRAC questions   Shannen Durphey
• AW: Introduction and "DIY turbo" list?   Rausch, Bernd
• WBO2 testing ... (What I see)   Glen Beard
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Mark S. Riley
• DIY_EFI Digest V5 #950   Robert Harris
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   clayb
• MAP Sensor   Bryan Zublin
• PWM an electromagnetic (A/C) clutch?   rob files
• WBO2 testing   Neil.Poersch at mts.mb.ca
• WB O2 Sensor Connector   Todd Danielson
• Datalogging RPM signal   Don DRI05 Ricciardiello
• WBO2 testing ... (What I see)   Jay Wallace
• [EFI] RE: PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• LPG Injection.   Greg Hermann
• PWM an electromagnetic (A/C) clutch?   bcroe at juno.com
• Heat Sinks for WB was RE: WBO2 testing   bcroe at juno.com
• PWM an electromagnetic (A/C) clutch?   Clint Corbin
• WBO2 testing   Neil.Poersch at mts.mb.ca
• WB O2 Sensor Connector   Todd Danielson
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   clayb
• PWM an electromagnetic (A/C) clutch?   rob files
• Heat Sinks for WB was RE: WBO2 testing   bcroe at juno.com
• DIY_EFI Digest V5 #950   Robert Harris
• MAP Sensor   Bryan Zublin
• LPG Injection.   Greg Hermann
• PWM an electromagnetic (A/C) clutch?   Clint Corbin
• PWM an electromagnetic (A/C) clutch?   bcroe at juno.com
• Datalogging RPM signal   Don DRI05 Ricciardiello
• [EFI] RE: PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• WBO2 testing ... (What I see)   Jay Wallace
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• DIY_EFI Digest V5 #950   Bruce
• Home for an injector   Bruce
• [EFI] RE: PWM an electromagnetic (A/C) clutch?   Bruce
• PWM an electromagnetic (A/C) clutch?   Programmer
• LPG Injection.   Phil Lamovie
• [EFI] RE: PWM an electromagnetic (A/C) clutch?   Chris Waltham
• [EFI] Re: Yet another archive script.   Daniel Houlton
• DIY_EFI Digest V5 #944   PorscheRcr at aol.com
• LPG Injection.   Phil Lamovie
• DIY_EFI Digest V5 #950   Bruce
• Home for an injector   Bruce
• [EFI] Re: Yet another archive script.   Daniel Houlton
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Greg Hermann
• [EFI] RE: PWM an electromagnetic (A/C) clutch?   Chris Waltham
• [EFI] RE: PWM an electromagnetic (A/C) clutch?   Bruce
• DIY_EFI Digest V5 #944   PorscheRcr at aol.com
• PWM an electromagnetic (A/C) clutch?   Programmer
• Heat Sinks for WB was RE: WBO2 testing   Nic van der Walt
• PWM an electromagnetic (A/C) clutch?   Jim Yeagley
• [EFI] RE: PWM an electromagnetic (A/C) clutch?   Ron Schroeder
• LPG Injection.   Shirley, Mark R
• DIY turbo type list   Richie Austin
• MAP Sensor   Andrew Theurer
• WB O2 Sensor Connector   Bryan Zublin
• Datalogging RPM signal   Steve.Flanagan at VerizonWireless.com
• Turbo Chubby parts   Tom Sharpe
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Tom Sharpe
• WB O2 Sensor Connector   Bryan Zublin
• MAP Sensor   Andrew Theurer
• Datalogging RPM signal   Steve.Flanagan at VerizonWireless.com
• DIY turbo type list   Richie Austin
• Turbo Chubby parts   Tom Sharpe
• PWM an electromagnetic (A/C) clutch?   Jim Yeagley
• [EFI] RE: PWM an electromagnetic (A/C) clutch?   Ron Schroeder
• turbo SBC's... was RE: Thanks for the EFI! (off topic)   Tom Sharpe
• Heat Sinks for WB was RE: WBO2 testing   Nic van der Walt
• LPG Injection.   Shirley, Mark R
• PWM an electromagnetic (A/C) clutch?   Bernd Felsche
• PWM an electromagnetic (A/C) clutch?   Bernd Felsche
• LPG Injection.   The Punisher
• Datalogging RPM signal   Brian Dessent
• MAP Sensor   Brian Dessent
• Turbo Chubby parts   Bob - Uni
• Datalogging RPM signal   Tomas J. Sokorai Sch.
• Heat Sinks for WB was RE: WBO2 testing   Stephen Andersen
• fuel filter particle size   abnengineering at cs.com
• Home Dyno was RE: Datalogging RPM signal   Stephen Andersen
• WB O2 Sensor Connector   Jurgen Hartwig
• Home Dyno (was) Datalogging RPM signal   Glen Beard
• MAP Sensor   Bruce
• MAP Sensor   Barry Tisdale
• MAP Sensor   Andrew Theurer
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• fuel filter particle size   abnengineering at cs.com
• WB O2 Sensor Connector   Jurgen Hartwig
• Datalogging RPM signal   Tomas J. Sokorai Sch.
• LPG Injection.   The Punisher
• Home Dyno was RE: Datalogging RPM signal   Stephen Andersen
• MAP Sensor   Bruce
• Turbo Chubby parts   Bob - Uni
• MAP Sensor   Brian Dessent
• Home Dyno (was) Datalogging RPM signal   Glen Beard
• Datalogging RPM signal   Brian Dessent
• Heat Sinks for WB was RE: WBO2 testing   Stephen Andersen
• MAP Sensor   Barry Tisdale
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• MAP Sensor   Andrew Theurer
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• Datalogging RPM signal   Eric Fahlgren
• wbo2 testing question   Xin
• Maximum Piston Speed   elcamino73
• MAP Sensor   Spencer Cox
• SBC Turbo   Bruce
• Increasing fuel pressure   Mark S. Riley
• LPG Injection.   Chris McKinnon
• DIY_EFI Digest V5 #955   Michael Kosarev
• eDIST, or ignition the final answer   Bruce
• MAP Sensor   Phil Hunter
• Maximum Piston Speed   Kris Weldy
• More wb_lcd pics   Bill Shaw
• Datalogging RPM signal   Peter Gargano
• Home Dyno (was) Datalogging RPM signal   Bernd Felsche
• MAP Sensor   Spencer Cox
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• wbo2 testing question   Xin
• DIY_EFI Digest V5 #955   Michael Kosarev
• eDIST, or ignition the final answer   Bruce
• Maximum Piston Speed   elcamino73
• PWM an electromagnetic (A/C) clutch?   Daniel Houlton
• LPG Injection.   Chris McKinnon
• SBC Turbo   Bruce
• Increasing fuel pressure   Mark S. Riley
• MAP Sensor   Phil Hunter
• More wb_lcd pics   Bill Shaw
• Datalogging RPM signal   Eric Fahlgren
• Maximum Piston Speed   Kris Weldy
• Datalogging RPM signal   Peter Gargano
• Home Dyno (was) Datalogging RPM signal   Bernd Felsche
• More wb_lcd pics   efi_student
• SBC Turbo   Shannen Durphey
• MAP Sensor   Programmer
• fuel filter particle size   Bruce
• SBC Turbo   Bob Wooten
• Maximum Piston Speed   The Dupuis
• LPG Injection.   Chris McKinnon
• RS232 interface for the Fuel Mixture Display (KC-5300 kit)   Peter Gargano
• LPG Injection.   Phil Lamovie
• Turbo Chubby parts   Ron Schroeder
• LPG Injection.with conventional injector   Phil Lamovie
• wbo2 testing question   rr
• LPG Injection.   Chris McKinnon
• Maximum Piston Speed   The Dupuis
• SBC Turbo   Bob Wooten
• MAP Sensor   Programmer
• fuel filter particle size   Bruce
• SBC Turbo   Shannen Durphey
• RS232 interface for the Fuel Mixture Display (KC-5300 kit)   Peter Gargano
• More wb_lcd pics   efi_student
• wbo2 testing question   rr
• LPG Injection.   Phil Lamovie
• LPG Injection.with conventional injector   Phil Lamovie
• Turbo Chubby parts   Ron Schroeder
• eDIST, or ignition the final answer   Moofaloof at aol.com
• Maximum Piston Speed   Greg Hermann
• Turbo Chubby parts   Bruce
• MAP Sensor   Gary Schaumberg
• Turbo Chubby parts   Bruce
• LPG Injection.   The Punisher
• SBC Turbo   SteveL
• Adding a gas tank return   Bruce
• Bosch bins   Dylan Johnson
• Air/Fuel Monitor   Erik Quackenbush
• SBC Turbo   SteveL
• eDIST, or ignition the final answer   Moofaloof at aol.com
• Adding a gas tank return   Bruce
• LPG Injection.   The Punisher
• MAP Sensor   Gary Schaumberg
• Turbo Chubby parts   Bruce
• Bosch bins   Dylan Johnson
• Maximum Piston Speed   Greg Hermann
• Turbo Chubby parts   Bruce
• Air/Fuel Monitor   Erik Quackenbush
• Adding a gas tank return   ECMnut at aol.com
• Bosch bins   David Goldstein
• MAP Sensor   Programmer
• Turbo Chubby parts   Greg Hermann
• Turbo Chubby parts   Greg Hermann
• AMF & efi..   Antti Lehtonen
• Adding a gas tank return   Camden Lindsay
• LPG Injection.   Greg Hermann
• Adding a gas tank return   bcroe at juno.com
• Air/Fuel Monitor   bcroe at juno.com
• Adding a gas tank return   Bernd Felsche
• MAP Sensor   Bernd Felsche
• Maximum Piston Speed   Shannen Durphey
• SBC Turbo   Bruce
• eDIST, or ignition the final answer   Bruce
• Adding a gas tank return   ECMnut at aol.com
• Air/Fuel Monitor   bcroe at juno.com
• Adding a gas tank return   bcroe at juno.com
• Adding a gas tank return   Camden Lindsay
• Turbo Chubby parts   Greg Hermann
• MAP Sensor   Bernd Felsche
• LPG Injection.   Greg Hermann
• MAP Sensor   Programmer
• Adding a gas tank return   Bernd Felsche
• eDIST, or ignition the final answer   Bruce
• Maximum Piston Speed   Shannen Durphey
• SBC Turbo   Bruce
• Bosch bins   David Goldstein
• AMF & efi..   Antti Lehtonen
• Turbo Chubby parts   Greg Hermann
• dwell angle control   Carsten Beth
• My Introduction   joe daddy
• Adding a gas tank return   Fran and Bud
• Turbo Chubby parts   Bruce
• Adding a gas tank return   Moofaloof at aol.com
• AMF & efi..   Jason Francolini
• MAP Sensor   efi_student
• Turbo Chubby parts   Bruce
• Adding a gas tank return   Moofaloof at aol.com
• Adding a gas tank return   Fran and Bud
• My Introduction   joe daddy
• AMF & efi..   Jason Francolini
• dwell angle control   Carsten Beth
• MAP Sensor   efi_student
• Turbo Chubby parts   efi_student
• Turbo Chubby parts   efi_student
• My Introduction   Shannen Durphey
• Now general warnings for retrofits was Re: Adding a gas tank return   Shannen Durphey
• My Introduction   Moofaloof at aol.com
• Adding a gas tank return   Jeff Meager
• eDIST, or ignition the final answer   Bob Wooten
• Adding a gas tank return   elcamino73
• DIY-WB pcb layout   Igor Dorrestijn
• Datalogging RPM signal   Phil Hunter
• wbo2 testing question   Stephen Andersen
• Adding a gas tank return   Shannen Durphey
• Adding a gas tank return   Bob Wooten
• Bosch bins   944Technologist
• My Introduction   Shannen Durphey
• My Introduction   Moofaloof at aol.com
• eDIST, or ignition the final answer   Bob Wooten
• Now general warnings for retrofits was Re: Adding a gas tank return   Shannen Durphey
• Adding a gas tank return   Shannen Durphey
• wbo2 testing question   Stephen Andersen
• Adding a gas tank return   Jeff Meager
• Datalogging RPM signal   Phil Hunter
• Adding a gas tank return   elcamino73
• Adding a gas tank return   Bob Wooten
• DIY-WB pcb layout   Igor Dorrestijn
• Bosch bins   944Technologist

Last message date: Sat Dec 29 22:01:29 GMT 2001
Archived on: Thu May 30 05:59:10 GMT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...