Turbo Chubby parts

[Bruce]

Vaporization is primarily used for charge cooling.
Atomisation is generally used for raising the threhold of detonation.
Bruce



From: "elcamino73" <elcamino73 at mindspring.com>
Subject: Re: Turbo Chubby parts
> What would be the benefits of each way Bruce?

> From: "Bruce" nacelp at bright.net
> Subject: Re: Turbo Chubby parts
> > Lots of pressure, small *jets*, so as to make a truely fine mist.
> > In the case of dry manifolding, with WI it will become wet with WI.  So
> you have to rethink things.   Water has alot of inertia, compared to air,
and
> > either your looking for vaporization, or atomization, both serve two
> > different goals.  You have to figure out what goals you want and what
> > compromises your willing to make, with each application.
> > Bruce
> >   Air hoses, and WI are to be used ONLY with adult supervision, when the
> lil guys are around (just trust me on that one).

> > From: "Bob Wooten" <r71chevy at earthlink.net>
> > Subject: RE: Turbo Chubby parts
> > > as a follow up, IYO, what constitutes "done right"?
> > > Tanx
> > > BW

> > > Behalf Of Bob Wooten
> > > Subject: RE: Turbo Chubby parts
> > > Also, I consider WI done right as a must.
> > > Bruce
> > > Whats WI?  (water injection?)
> > > BW


----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org