MAP Sensor

Andrew Theurer habanero at us.ibm.com
Sun Dec 23 23:02:21 GMT 2001


Found the GM car that came with the 3 bar map from the factory.  It's
the 1989 Pontiac Trans Am with the Buick 3.8 turbo V6.  Can the
maintainer of the list below update it?  It's $75 through Napa. 
Autozone's computer reports "replacement not required".  I was lucky,
some GM dealers stock it. 

Thanks,

Andrew 

Andrew Theurer wrote:
> 
> When you went to Autozone, did you specificy a particular car for the 2
> bar sensor?  I need a 3 bar and noticed there is no factory car that
> applies, and the drones at every parts store require a car to do a
> search.  Does anyone know where the 3 bar sensor is sold (online?) that
> is a reasonable price?
> 
> -Andrew
> 
> Bryan Zublin wrote:
> >
> > The GM MAP sensors are probably the cheapest.  I purchased a new one from
> > Autozone for $30.  It was made by Wells, part number SU-129 for the 2 bar
> > sensor (good for 1 bar of boost).  Part numbers listed at:
> > http://www.diy-efi.org/gmecm/component_info/sensors.html
> >
> > Bryan Zublin
> >
> > At 09:47 PM 12/10/2001 -0500, you wrote:
> > Got any recommendations for a nice 5V MAP sensor for 1bar boost
> > applications, either wrecker or new?  I found one at Omega for
> > like $5, but I wanted to know if there is something else
> > available.  In my case it is just for logging vacuum/boost,
> > not for controlling EFI...
> >
> > Steve
> >
> > ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> > ----------------------------------------------------------------------------
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



More information about the Diy_efi mailing list