Home for an injector

Greg Hermann bearbvd at mindspring.com
Mon Dec 17 08:08:28 GMT 2001


At 8:51 AM 12/15/01, Dave Williams wrote:
>-> Has anyone any practical experience in mounting a port type injector
>-> in a hot oil environment?.  As in the lifter valley?.
>
> I don't see any problems with that.  You might want to be particular
>about the type of wiring you use; some of the cheap stuff doesn't like
>oil much.  The connectors should be no problem; the old Cadillac V8-6-4
>Eaton solenoids use the same connector as an ordinary Bendix type
>injector.

You would want "type MTW" insulated wire. the "MTW" stands for machine tool
wire. Don't think it's good much above 80 or 90° C, though. Forget the
actual temp rating on it.

Greg
>
>
>-> Any good data about how it might survive in a 200dF *world*.
>
> It gets easily that hot under the hood anyway.
>
>
>-> has anyone done any injectoe mounting without using a rail, and what
>-> kind of success have you had.
>
> BDS cuts screw threads on each end of the injector and screws them
>directly into the intake, then screws a hose fitting on the other end.
>
> MSD sells some nice bits to mount a hose on the end using the stock
>O-ring setup and a wireform clip to hold the adapter in place.
>
>==dave.williams at chaos.lrk.ar.us======================================
>I've got a secret / I've been hiding / under my skin / | Who are you?
>my heart is human / my blood is boiling / my brain IBM |   who, who?
>============================== http://angelfire.com/ar/dw42/index.htm
>
>
>----- End of forwarded message from owner-diy_efi at diy-efi.org -----
>----------------------------------------------------------------------------
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org


----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



More information about the Diy_efi mailing list