turbo SBC's... was RE: Thanks for the EFI! (off topic)

[Bob Wooten]

Crower makes a flavor.  My buddy was running them in his 406 B4 he went BBC.
I guess that they take a standard Ford lifter & machine them down to fit
into the Chevy hole. I have not seen it, just knew that to get them in he
had to turn the motor up side down & feed them in from the bottom & then
slide the cam in to hold them into place.  Kinda trick really. I never
thought about the benefits of them for a turbo app, VS a Roller.

BW

-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
Behalf Of elcamino73
Sent: Friday, December 14, 2001 5:24 PM
To: diy_efi at diy-efi.org
Subject: Re: turbo SBC's... was RE: Thanks for the EFI! (off topic)


Got a link to any info on them?
What can you tell me about them Greg?


----- Original Message -----
From: "Greg Hermann" <bearbvd at mindspring.com>
To: <diy_efi at diy-efi.org>
Sent: Friday, December 14, 2001 2:32 PM
Subject: Re: turbo SBC's... was RE: Thanks for the EFI! (off topic)


> >
> >> >  Hydraulic roller cam 224/236 duration. ACCEl manifold with cast in
> >bungs
> >
> Take a LONG,  careful look at using mushroom lifters instead of rollers
for
> the type of lift, valve rates, and duration you will want for a turbo
> engine. They will kick even a mechanical roller across the shop for quick
> and high lift at short durations !
>
> Greg
>
> >> Andris Skulte
> >> Skulte Performance Designs
> >> Z28tt-89 IROC T56 DFI Twin Turbo
> >> http://www.skulte.com
> >>
>
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org