Home for an injector

[elcamino73]

MSD has most of what you would need.


----- Original Message -----
From: <WEG1192 at aol.com>
To: <diy_efi at diy-efi.org>
Sent: Saturday, December 15, 2001 11:51 PM
Subject: Re: Home for an injector


> In a message dated 12/15/01 10:26:30 PM Eastern Standard Time,
> dave.williams at chaos.lrk.ar.us writes:
>
> > BDS cuts screw threads on each end of the injector and screws them
> >  directly into the intake, then screws a hose fitting on the other end.
> >
> I'm doing this but I didn't speak up because you asked what kind of
success
> and its the first time I've tried it. Mainly saves a ton of precise
> machining. If you mar up the hole when drilling for an O-ring, you're SOL.
If
> you mar up the hole when drilling for a threaded injector, a tap will take
> care of it. I saved about 20 hours of work from this trick. Now the task
is
> to build a separate fitting for each injector and figure out a way to hold
> them on the injector. Got an idea but haven't finished machining.
>
> JW
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org