Racelogic Emulator was RE: Honda ecm..hondata

Stephen Andersen SAndersen at advan-tek.com
Tue Dec 4 13:54:38 GMT 2001


ANyone have any idea how to handle the checksums or 
any "protection" of the memory on the newer ECU's?

I am trying to find out what memory chip the later ECU's
I want to mess with are, to see if the racelogic emulator
can handle what I am trying to do...

Also, what type of equipment is required, and how much does
it cost, to program the 27c256 eprom and the later flashproms?

Thanks,
Steve


> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Ioannis Andrianakis
> Sent: Tuesday, November 27, 2001 4:32 AM
> To: diy_efi at diy-efi.org
> Subject: Re: Racelogic Emulator was RE: Honda ecm..hondata
> 
> 
> It will handle emulation of 23c32-27c1024 eproms, 
> 28/29f010-28/29f040 and
> 29f200 and 29f400 flashproms. It will not program the newest 
> ecus through
> the diagnostic port. It will work only if you have direct 
> access to the
> memory to unsolder it and connect the emulator in its place. 
> Dim Sport  has
> a unit for some car models to program through the diagnostic port.
> 
> Ioannis Andrianakis
> ----- Original Message -----
> From: Stephen Andersen <SAndersen at advan-tek.com>
> To: <diy_efi at diy-efi.org>
> Sent: 27 Íïåìâñßïõ 2001 04:05
> Subject: Racelogic Emulator was RE: Honda ecm..hondata
> 
> 
> Does the racelogic emulator, or the other one you listed,
> have the capability handle later model OBDII electronics
> as well as the "older" EPROM type ECU's?
> 
> If so, can the OBDII models flash program?
> 
> Thanks,
> Steve
> 
> 
> 
> --------------------------------------------------------------
> --------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" 
> (without the quotes)
> in the body of a message (not the subject) to 
> majordomo at lists.diy-efi.org
> 
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list