WB Requests

[Bruce]

At a glance not too bad, if you like spending big bucks.
Closer examination show a serial cable leading to the sensor.
And the oem connector is missing.
So where is the calibration resistor?.  In the photo the resolution isn't
great enough to see what might be a replaceable resistor.  If it's
calibration data is encrpyted in the chip, then they have you locked in to
buying their sensor at what ever they want to charge.

Another reason to just do a DIY-WB.
Bruce


From: "George Dickey" <georged at lsil.com>
Subject: Re: WB Requests
> Here is a unit I found on the Maita (MX5) forum. Never used it, no
> connection, etc
> http://www.geocities.com/francillion/
> George


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org