turbo SBC's... was RE: Thanks for the EFI! (off topic)

[elcamino73]

Do you mean in the archives or someplace else?
I actually have chosen a different compression and there fore rods and crank
as well.
But I am curious as to what you are alluding to.



----- Original Message -----
From: "Bruce" <nacelp at bright.net>
To: <diy_efi at diy-efi.org>
Sent: Thursday, December 13, 2001 12:23 AM
Subject: Re: turbo SBC's... was RE: Thanks for the EFI! (off topic)


>
> Might investigate Eagle Rods a bit further.
> they're done by the same crowd as the Scat Cranks.
> Oh and read about Scat cranks for related info..
> Bruce
>
> From: "elcamino73" <elcamino73 at mindspring.com>
> > Building a 380 with 400 block 3.50 inch eagle crank and 5.85 eagle rods
JE
> > d-dish (-32cc) pistons
>
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org