Sensor Question (and the usefulness of cam sensors)

[clayb]

> Date: Sat, 15 Dec 2001 02:53:38 -0500
> From: "Jon Davis" <jfdavis at epix.net>
> Subject: Re: Sensor Question (and the usefulness of cam sensors)
 
> You must have had a bad timing chain or something... was it one of those GMs
> with the phenolic gear on the cam? I have a DOHC 4 with a optical pickup on
> the cam and a mile long single-row timing chain and I have never seen any
> ignition bounce.

The chain and gears were fine, made out of steel. You're example has no
helical distributor gear to add slop, and I would also guess you have a
chain tensioner.

Apples and oranges.

- Clay

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org