MAP Sensor

[Programmer]

I stand corrected

1 atmosphere (1kgf/cm)  is 14.22 pound per square in.
1 Bar is 100 kPa
100 kPa is 14.5 PSI
1 Bar is 0.98692 of an Atmosphere

Close enough ?

Lyndon.

----- Original Message -----
From: "Gary Schaumberg" <arnie at nconnect.net>
To: <diy_efi at diy-efi.org>
Sent: Monday, December 24, 2001 6:38 PM
Subject: Re: MAP Sensor


> Arnie qualifies with:
>
> For reference let it be known that 1 bar is NOT equal to 1 atmosphere.
> I bar is equal to 14.5 psi.  Care should be taken when comparing apples
> to oranges.
>
>
> Programmer wrote:
>
>  1bar=1 atmosphere (or 14.7 PSI).
>  So a 2 bar MAP would be a 30 PSI sensor--or 15 PSI boost
>  above atmospheric.
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org