Datalogging RPM signal

[Glen Beard]

Bill Shaw wrote:
> 
> One suggestion would be to wrap a few turns of 18 gauge wire around the #1 plug wire,  then feed this signal into one of the unused inputs on the WB-LCD.
> Logging the 2 channels would give you RPM in sync with AFR.  It would take a little playing to get the configuration right,  but something like this
> should work.
> 

While digging through loads of info on DAQs online, I just
came across this paper.  It may be of use to some of the
less EE challenged...
http://www.eng.auburn.edu/ece/cars/old/finalreport.pdf

-- 
Glen Beard  95 T/A conv M6
355, Vortech, heads, cam...
http://home.nycap.rr.com/gbeard1/TransAm.html
http://home.nycap.rr.com/gbeard1/Impala/Impala.html
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org