Adding a gas tank return

[Bruce]

In the process of doing a EFI retrofit.
The fuel tank has 3 lines,
one out to pump
charcoal canister
fuel return

The fuel out is fine.
The pump needs a return line to the tank
we need a fuel return
and a vent line

The oem sender has a restrictor on the CCP line, and the oem return is below
the fuel level.

Has anyone dealt with a similiar situation?, and what was your answers.

Drilling into the filler neck looks like a real PITA.

Beginning to look like a tank R+R and adding bulk head AN stuff around the
sender is the only answer.
TIA
Bruce


----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org