WBO2 testing

[Glen Beard]

OK, I've gotten everything soldered up, and I am testing the
heater circuit using a tail lamp.  The lamp turns on nice
and bright building its current to 1.003 Amps.  Is the LED
supposed to turn on after a while?  Is the LT1086 (VR)
supposed to get sizzling hot even with a 2x3" Al heat sink? 
With the smaller heat sink I had on it, the bulb would light
up and then start to dim again.  If I blew across it and it
got brighter.

-- 
Glen Beard  95 T/A conv M6
355, Vortech, heads, cam...
http://home.nycap.rr.com/gbeard1/TransAm.html
http://home.nycap.rr.com/gbeard1/Impala/Impala.html

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org