WBO2 testing

w.shawsr at att.net w.shawsr at att.net
Wed Dec 19 07:10:30 GMT 2001


I don't think the LED came on when I was running with the 
lamp simulating the heater.  The regulator gets MUCH 
hotter with the lamp than with the sensor. It sounds like 
yours is working ok,  hook up the sensor!

bs
Glen Beard wrote:
> 
> OK, I've gotten everything soldered up, and I am testing the
> heater circuit using a tail lamp.  The lamp turns on nice
> and bright building its current to 1.003 Amps.  Is the LED
> supposed to turn on after a while?  Is the LT1086 (VR)
> supposed to get sizzling hot even with a 2x3" Al heat sink? 
> With the smaller heat sink I had on it, the bulb would light
> up and then start to dim again.  If I blew across it and it
> got brighter.
> 
> - -- 
> Glen Beard  95 T/A conv M6
> 355, Vortech, heads, cam...
> http://home.nycap.rr.com/gbeard1/TransAm.html
> http://home.nycap.rr.com/gbeard1/Impala/Impala.html
> 

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list