Spark plugs

[Greg Hermann]

At 1:01 PM 12/7/01, Bruce wrote:
>Nothing a soldering gun, some solder / flux, drills and a thumb vise
>wouldn't cure.   Getta DCOE right, and just use the *EFI* for ignition work.
>Trick is getting it right. <g>.
>Bruce
>
>
>
>From: <bill.shurvinton at nokia.com>
>Subject: RE: Spark plugs
>> I suspect I will have to live with the fouling until I get EFI running
>> as the current DCOE is seriously rich at low RPM (i.e. in traffic). Not
>> my choice I hasten to add.
>
Bill--

I suspect that Bruce and I, between us, could help you through getting the
DCOE _"RIGHT"_ . This oughtta be done off list, though.

If you think "source code" is black magic, you haven't been around much
DCOE/IDA tuning !!

Definitely something only to be shared with the "annointed" !! :-)

Greg


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org