polish inside of intake now? + black car injector update

[John Dammeyer]

I honestly haven't a clue as to where that might be.

----- Original Message -----
From: "Bruce Plecan" <nacelp at bright.net>
To: <diy_efi at diy-efi.org>
Sent: Wednesday, January 31, 2001 3:44 PM
Subject: Re: polish inside of intake now? + black car injector update


>
>
> If you poke around the GN Ttype Tech area there are some first shots of
what
> it looks like.
> Bruce
>
>
> From: "John Dammeyer" <johnd at autoartisans.com>
> > Post a picture somewhere!
> > John
>
> > From: "Bruce Plecan" nacelp at bright.net
> > > Changed the 40s to 55#ers on the GN.
> > > Amazingly just changing the injector size, and SOTP, things are really
> > nice.
> > > Running at just 10 PSI now is thrilling.   Roads limited any use of
WOT.
> > >
> > > For the 40s to be right had to use 37ish.   The 55s are at 55.
> > > Might change with scanning but for now close enough
> > >
> > > MAFs, Turbos, and intake tracts can make a world of difference.
> > >
> > > I shortened the intake tract pre turbo about 3" and the spooling is
> > > noticeably better
> > > For the new guys, I also relocated the MAF to right by the throttle
body
> > > (post intercooler)
> > > Bruce
> > >    87 Black Car
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org