off topic / traction control

[Programmer]

Never looked at the pinouts--didn't realize they were pin for pin
matched...<g>.

Lyndon

----- Original Message -----
From: den Broeder, Ernst <edenbroe at cisco.com>
To: <diy_efi at diy-efi.org>
Sent: Saturday, January 13, 2001 1:56 PM
Subject: Re: off topic / traction control


> I adjusted the BPW until the 2.8L ran half decent and then tuned the rest
> of the tables from there in.
>
> Why not use the 4.3 ECM for the 4.3?  I made no harness changes when I
> replaced the '7429 with the '7747.
>
> Ernst
>
>
> At 04:59 PM 1/12/01 -0700, you wrote:
> >Just wondering how you made out with the fuel tables...Moreso looking for
> >someone that did use the stock 2.8V6 computer and made the necessary
table
> >changes for a 4.3L V6
> >
> >Lyndon.
> >----- Original Message -----
> >From: den Broeder, Ernst <edenbroe at cisco.com>
> >To: <diy_efi at diy-efi.org>
> >Sent: Friday, January 12, 2001 3:21 PM
> >Subject: Re: off topic / traction control
> >
> >
> > > Which part?  I've upgraded my 2.8tbi to a 4.3tbi 1227747 controller...
is
> > > that what you are referring to?
> > >
> > > Ernst
> > >
> > > At 02:33 PM 1/12/01 -0700, you wrote:
> > > >Thankyou--at least there's another racer out there <g>...
> > > >
> > > >EFI content--anyone converted a 2.8V6 TBI to 4.3 lately ??
> > > >
> > > >Lyndon.
> > >
> >
> --------------------------------------------------------------------------
> >--
> > > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> >quotes)
> > > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> > >
> >
>
>---------------------------------------------------------------------------
-
> >To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org