Haltech map sensor switch?

[Kris Weldy]

Sorry for the confusion.I meant i need to change the map sensor,the software
problem i can work out,but i want to know if i can replace the map sensor
that is actually soldered to the ecu.Its not a plug in type that i can see
,and is actually inside the ecu cover.I also need to know where to find a 3
bar replacement and any compatibility issues other than throwing the map
sensor readings off.Thanks.--
Kris Weldy (AIM: VolvoFam3)
Arlington, TX
'87 760ti, 20psi w/B23FT, TO3/04E turbo, many mods




> I have an E6S which is the same as an F9x on the fuel side I think.
> In any case, the software allows a change from a 1-2-3 bar and you just
have
> to hook up a new map sensor.  Do you mean that the map signal actually
plugs
> into your ECU or do you need to know how to change the software or how to
> change the GM weatherpack connector to 3-bar?
>
> James Ballenger
>
>
> >-----Original Message-----
> >From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> >Behalf Of Kris Weldy
> >Sent: Wednesday, January 17, 2001 9:18 PM
> >To: diy_efi at diy-efi.org
> >Subject: Haltech map sensor switch?
> >
> >
> >I have a haltech f7c  and i need to switch the internal map
> >sensor to a 3
> >bar map sensor,it currently only goes to 22psi,can anyone do
> >this,or does
> >anyone know how to do this?
> >--
> >Kris Weldy (AIM: VolvoFam3)
> >Arlington, TX
> >'87 760ti, 20psi w/B23FT, TO3/04E turbo, many mods
> >
> >
> >
> >
> >---------------------------------------------------------------
> >-------------
> >To unsubscribe from diy_efi, send "unsubscribe diy_efi"
> >(without the quotes)
> >in the body of a message (not the subject) to
> >majordomo at lists.diy-efi.org
> >
> >
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org