MAP Sensor.

[Kris Weldy]

so i cant replace that with the new motorolla sensor?Asfar as i know mine
only senses pressure-not temperature-i have an ambient air temp sendee for
that on the haltech.Thanks for further clarification.--
Kris Weldy (AIM: VolvoFam3)
Arlington, TX
'87 760ti, 20psi w/B23FT, TO3/04E turbo, many mods




> Hi,
>
> It's a sensor specifically designed for Turbo'd applications.  If you take
> apart an older Haltech you'll see it's earlier predecessor like an MPX2100
> or some variant.  This particular one is temperature calibrated over the
> Industrial temperature range.  I used the MPX2100 for Ambient pressure but
a
> new design will now use these as they are compensated much better.
>
> It's by no means ready to go as a bolt it inside the engine compartment
but
> more a device meant for a roll your own processor based system.
>
> Cheers,
>
> John Dammeyer
>
> ----- Original Message -----
> From: "Walter Sherwin" <wsherwin at home.com>
> To: <diy_efi at diy-efi.org>
> Sent: Monday, January 29, 2001 5:09 PM
> Subject: Re: MAP Sensor.
>
>
> > What is this sensor?  Range?  Same connector hook-up?  Any notable
> benefits
> > beyond the OE GM MAP's?  Do you use this sensor? Would be curious to
know
> > more about it.......
> >
> > Walt.
> >
> >
> >
> > > Hi all,
> > >
> > > Any reason no one has mentioned the Motorola MPX4250A series as a
> suitable
> > > MAP sensor for Turbo'd applications?
> > >
> > > Regards,
> > >
> > > John Dammeyer
> > >
> > >
> >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org