intake plenum size?

[David Hunt]

Bruce,

I think you can say that about any engine, not just wankels and not just
internal combustion and not just....

dh
----- Original Message -----
From: "Bruce" <nacelp at bright.net>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, July 03, 2001 6:31 AM
Subject: Re: intake plenum size?


>
> All the hotrod rotaries I've ever seen have used a IR for manifolding,
It's
> the best set up there is and easy to apply to a rotary.
> The peak rpm of a rotary is defined by the depth of your wallet.
> Bruce
>
>
>
> From: "peter bengtsson" <peterbeng at hotmail.com>
> Subject: Re: intake plenum size?
> > Is there anyone with any experince from wankel engines?
> > I`ve heard that bigger plenuns makes the engin peak at higher rpm`s and
> > smaller at lower.
> > I`ve got an mazda 12a engine (1.2liters), any ideas in what rpm my
engine
> > would peak with a 1.2 liter plenum?
> > Peter
>
> > >From: "Bruce" nacelp at bright.net
> > >Subject: Re: intake plenum size?
> > >   More then one cylinder, and not Individual Runners, you'll have a
> > >plenum.
> > >Carb'd engines can have a plenum.
> > >   Hi performance engines about follow that, thou some folks are having
> > >luck
> > >with plenums much larger then that.
> > >Bruce
> > >
> > >From: "Ian Weaver" <ijweaver at adam.com.au>
> > >Subject: Re: intake plenum size?
> > > > The volume of a plenum chamber is normally the same as engine volume
> > > > ie: 3lt engine = 3lt chamber.
> > > > Plenum chambers are normally associatedwith injected engines.
> > > > Ian
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org