July 2001 Archives by thread
Starting: Sun Jul 1 05:44:13 GMT 2001
Ending: Tue Jul 31 23:16:12 GMT 2001
Messages: 397
- sorry...
David Hunt
- EGOR artwork posted
David Hunt
- intake plenum size?
Ian Weaver
- intake plenum size?
Bruce
- ABS retrofit
Bob Wooten
- TBI injectors
Camden Lindsay
- intake plenum size?
peter bengtsson
- intake plenum size?
Bruce
- intake plenum size?
Larry Heath
- intake plenum size?
peter bengtsson
- intake plenum size?
Bruce
- intake plenum size?
bill.shurvinton at nokia.com
- intake plenum size?
Chris Capowski
- intake plenum size & reversion
Roger Heflin
- intake plenum size?
David Hunt
- intake plenum size?
David Hunt
- intake plenum size & reversion
James Montebello
- Andy Bellezza/PicTel is out of the office.
Andy_Bellezza at pictel.com
- converting stock fuel tank
Jeff Bromberger
- Honda/NTK O2 sensor
Dan
- TBI injectors
Phil
- tbi injectors
jimlinder at juno.com
- Honda/NTK O2 sensor
Mark S. Riley
- intake plenum size?
Bruce
- Nissan`s
Ian Weaver
- tbi injectors
Programmer
- Injector flowbench?
Vanirv6 at aol.com
- DIY flowbench?
Barry Tisdale
- DIY flowbench?
Bruce
- intake plenum size?
Bruce
- DIY flowbench?
Jorgen Karlsson
- Delco 27474 DSNEF info?
Peter Gargano
- DIY flowbench?
ECMnut at aol.com
- Honda/NTK O2 sensor
Glenn & Debbie Woodhouse
- BOSCH ECM PROGRAMMING
Wilkie, Johnson (WLKJ)
- Honda/NTK O2 sensor (redux)
Dan
- Honda/NTK O2 sensor
Barry Tisdale
- Injector flowbench?
Barry Tisdale
- DIY flowbench?
Barry Tisdale
- Honda/NTK O2 sensor (redux)
Bruce
- Data collection system
TomQ
- DIY flowbench?
Bruce Bowling
- DIY flowbench?
ECMnut at aol.com
- DIY flowbench?
Bruce
- intake plenum size & reversion
Walter Sherwin
- DIY flowbench?
David Hunt
- Data collection system
Jason R. Haines
- DIY flowbench?
Walter Sherwin
- DIY flowbench?
Bruce
- DIY flowbench?
Walter Sherwin
- DIY flowbench?
Jörgen Karlsson
- DIY flowbench?
Greg Hermann
- intake plenum size & reversion
Shannen Durphey
- Nissans
Stuart Baly
- Data collection system
Wilkie, Johnson (WLKJ)
- Data collection system
Wilkie, Johnson (WLKJ)
- BOSCH ECM PROGRAMMING
Kurt Heintz
- 911 Porsche, kit to convert from mechanical injectors to electronic?
Chris Wilson
- was: Nissans now:VIRUS
Franc Buxton
- 911 Porsche, kit to convert from mechanical injectors to electronic?
Bruce
- DIY flowbench?
Shirley, Mark R
- DIY flowbench?
Jörgen Karlsson
- Air cooled EFI, was 911 Porsche, kit to convert from
Ron Schroeder
- DIY_EFI Digest V5 #656
Tom
- Honda/NTK O2 sensor (redux)
Glenn & Debbie Woodhouse
- DIY flowbench?
Barry Tisdale
- Honda/NTK O2 sensor (redux)
Barry Tisdale
- Honda/NTK O2 sensor (redux)
Brian L Massey
- DIY flowbench?
Walter Sherwin
- Honda/NTK O2 sensor (redux)
Rob O
- egt probe location
Jeff Bromberger
- 911 Porsche, kit to convert from mechanical injectors to electronic?
944Technologist
- Howell, Again
Onebil2mny at aol.com
- [Ferrari] Throttle body sizing question for carb to EFI 308
Bill Shaw
- Howell, Again
Rob O
- Honda/NTK O2 sensor (redux)
Barry Tisdale
- '90 GMC Sierra ECM Timing
Ken Richardson
- How to pull parts at a self serve yard
Ludis Langens
- How to pull parts at a self serve yard
ECMnut at aol.com
- Howell, Again
Onebil2mny at aol.com
- Crank Sensor/Cam sensor
Onebil2mny at aol.com
- Crank Sensor/Cam sensor
John W. Stewart
- Crank Sensor/Cam sensor
Brian Warburton
- inlet manifold/plenum chambers
purplemonster
- Honda/NTK O2 sensor (redux)
Glenn & Debbie Woodhouse
- Honda/NTK O2 sensor (redux)
Brian L Massey
- How to pull parts at a self serve yard
David Hunt
- egt probe location
David Hunt
- FOR SALE - misc. ECM, PCM, VCM, ECU, ABS modules etc.
Jason Haines
- inlet manifold/plenum chambers
Les Newell
- Honda/NTK O2 sensor (redux)
Jörgen Karlsson
- Honda/NTK O2 sensor (redux)
Glenn & Debbie Woodhouse
- Honda/NTK O2 sensor/Speed Pro
Mark S. Riley
- new subscriber
Chris
- new subscriber
justin ivan
- DIY flowbench?
Eric Aos
- new subscriber
Jason Wade
- new subscriber
Chris
- Logs of individual cyl with O2+WB
Richard Wakeling
- Logs of individual cyl with O2+WB
Peter Gargano
- Logs of individual cyl with O2+WB
Rich M
- Maximum advance
944Technologist
- 'EFI technology' and books
Arnaud Westenberg
- Maximum advance
justin ivan
- Maximum advance
Peter Matousek
- Maximum advance
Axel Rietschin
- Logs of individual cyl with O2+WB
Peter Gargano
- Maximum advance
Bernd Felsche
- Logs of individual cyl with O2+WB
rr
- Maximum advance
Marcel Chichak remote account
- WB Instruments
John Dammeyer
- Measuring VE
gte861v at prism.gatech.edu
- WB Instruments
Bruce
- WB Instruments
Bruce
- Maximum advance
Bruce
- Logs of individual cyl with O2+WB
Bruce
- WB Instruments
Barry Tisdale
- Measuring VE
John Dammeyer
- Maximum advance
Dave Plummer
- Maximum advance
Jeff Bromberger
- Maximum advance
James Montebello
- Maximum advance
Jurgen Hartwig
- Logs of individual cyl with O2+WB
Richard Wakeling
- Logs of individual cyl with O2+WB
Dan Zorde
- Maximum advance
Brian Michalk
- Maximum advance
Bruce
- Maximum advance
skulte
- Maximum advance
Bernd Felsche
- WB Instruments
Moofaloof at aol.com
- DIY flowbench?
Chris Capowski
- DIY flowbench?
John Dammeyer
- Learning in MAP systems.
Tony Bryant
- DIY flowbench, vac source
Carter Shore
- Maximum advance
rr
- DIY flowbench?
Eric Fahlgren
- DIY flowbench?
Shirley, Mark R
- Maximum advance
Ron Schroeder
- DIY flowbench?
John Dammeyer
- DIY flowbench?
Rich M
- question about CDI and regular ignition
Jack
- Maximum advance
Walter Sherwin
- Maximum advance
skulte
- Honda/NTK O2 sensor
Peter Gargano
- question about CDI and regular ignition
John Dammeyer
- Maximum advance
Greg Hermann
- question about CDI and regular ignition
Peter Gargano
- question about CDI and regular ignition
James Montebello
- question about CDI and regular ignition
Larry Koutz
- question about CDI and regular ignition
John Dammeyer
- Max Advance
Roy
- Maximum advance
Eric Fahlgren
- Max Advance
Eric Fahlgren
- Maximum advance
Jorgen Karlsson
- DIY_EFI Digest V5 #663
Carter Shore
- Another use for a waste (maverick) spark coil??
Greg Hermann
- Max Advance
Jeff Bromberger
- Max Advance
Brian Michalk
- Maximum advance
Bernd Felsche
- Max Advance
Bernd Felsche
- DIY_EFI Digest V5 #663
John Dammeyer
- Max Advance
Dave Edge
- Another use for a waste (maverick) spark coil??
John Dammeyer
- Max Advance
Les Newell
- Max Advance
Eric Fahlgren
- Maximum advance
Eric Fahlgren
- WB Instruments
Jack
- WB Instruments
John Dammeyer
- WB Instruments
Brian L Massey
- WB Instruments
rr
- WB Instruments
rr
- Maximum advance
Greg Hermann
- Maximum advance
Walter Sherwin
- Honda/NTK O2 sensor
Peter Gargano
- Maximum advance
Axel Rietschin
- Maximum advance
skulte
- WB Instruments
Jack
- WB Instruments
Jack
- Maximum advance
Bernd Felsche
- Maximum advance
Bernd Felsche
- WB Instruments
Barry Tisdale
- WB Instruments
rr
- WB Instruments
rr
- Maximum advance
Axel Rietschin
- (Knock detection methods) Re: Maximum advance
Shannen Durphey
- Maximum advance
Greg Hermann
- Maximum advance
Bruce
- Maximum advance
Greg Hermann
- WB Instruments
Brian L Massey
- Maximum advance
Bernd Felsche
- WB Instruments
Bruce
- WB Instruments
Bob Wooten
- sorting out my proflo, one issue
Ross Corrigan
- sorting out my proflo, one issue
Bruce
- sorting out my proflo, one issue
Ross Corrigan
- WB Instruments
John
- WB Instruments
Brian L Massey
- Honda/NTK O2 sensor
Rob O
- Honda/NTK O2 sensor
Peter Gargano
- WB Instruments
rr
- Maximum advance
Andris Skulte
- Maximum advance
Greg Hermann
- WB Instruments
Bruce
- WB Instruments
rr
- WB Instruments
John
- WB Instruments
John Dammeyer
- WB Instruments
John Dammeyer
- WB Instruments
rr
- WB Instruments
Jurgen Hartwig
- WB Instruments
John
- WB Instruments
Brian L Massey
- WB Instruments
Brian L Massey
- WB Instruments
rr
- WB Instruments
rr
- WB Instruments
Brian L Massey
- WB Instruments
rr
- WB Instruments
Brian L Massey
- WB Instruments
Brian L Massey
- WB Instruments
rr
- WB Instruments
rr
- Mazda rotaries. Pre mix and octane reduction
Chris Wilson
- Mazda rotaries. Pre mix and octane reduction
Bruce
- 911 Porsche, kit to convert from mechanical injectors to electronic?
Chris Wilson
- Mazda rotaries. Pre mix and octane reduction
Kurt Heintz
- Mazda rotaries. Pre mix and octane reduction
Chris Wilson
- Mazda rotaries. Pre mix and octane reduction
dom
- (Knock detection methods) Re: Maximum advance
dom
- Mazda rotaries. Pre mix and octane reduction
md4etal
- converting stock fuel tank
Ludis Langens
- Mazda rotaries. Pre mix and octane reduction
Jorgen Karlsson
- Mazda rotaries. Pre mix and octane reduction
Phil
- (Knock detection methods) Re: Maximum advance
Axel Rietschin
- (Knock detection methods) Re: Maximum advance
Shannen Durphey
- Injector info needed.
Richard Wakeling
- 5 baud ECM?
Peter Gargano
- Professional wide band mixture measurement options.
Chris Wilson
- (Knock detection methods) Re: Maximum advance
Andrew R. Ghali
- Mazda rotaries. Pre mix and octane reduction
Andrew R. Ghali
- Mazda rotaries. Pre mix and octane reduction
Kurt Heintz
- Maximum advance
David Hunt
- Maximum advance
Axel Rietschin
- DIY_EFI Digest V5 #670
alexpeper
- archive update
steve ravet
- Want to Read Mercury Buss or Diognotic port
Gordon Couger
- Running rich
dave.johnson at gb.abb.com
- Running rich
Nic van der Walt
- Running rich
dave.johnson at gb.abb.com
- Max fuel pressure for 0280 150 945
Richard Wakeling
- Running rich
Eric Fahlgren
- Running rich
dave.johnson at gb.abb.com
- Max fuel pressure for 0280 150 945
Eric Fahlgren
- Max fuel pressure for 0280 150 945
Axel Rietschin
- AW: Max fuel pressure for 0280 150 945
Rausch, Bernd
- Max fuel pressure for 0280 150 945
Axel Rietschin
- AW: Max fuel pressure for 0280 150 945
Rausch, Bernd
- Max fuel pressure for 0280 150 945
Axel Rietschin
- Wtd: Device to Read 2000 Mercury 2000 bus or service port
Gordon Couger
- RC injectors.
Jörgen Karlsson
- AW: RC injectors.
Rausch, Bernd
- Is this thing on?
944Technologist
- Dyno testing turbo cars
lance
- Is this thing on?
Bruce
- Dyno testing turbo cars
Jörgen Karlsson
- Maximum advance
David Hunt
- Interface Cable
Wilkie, Johnson (WLKJ)
- Max fuel pressure for 0280 150 945
Walter Sherwin
- Dyno testing turbo cars
Hugh
- Dyno testing turbo cars
Bruce
- Max fuel pressure for 0280 150 945
Axel Rietschin
- Dyno testing turbo cars
Mark S. Riley
- Dyno testing turbo cars
Flanagan, Steve
- Dyno testing turbo cars
Bruce
- aftermarket fuel injections systmes
purplemonster
- Dyno testing turbo cars
Flanagan, Steve
- Dyno testing turbo cars
Brian Renegar
- Taglioni (Ducati)
Peter Gargano
- O2 sensor data sheet
Dan Zorde
- O2 sensor data sheet
Matt Beaubien
- O2 sensor data sheet
The Punisher
- O2 sensor data sheet
Wilkie, Johnson (WLKJ)
- Virus target?
Shannen Durphey
- O2 sensor data sheet
Eric Fahlgren
- O2 sensor data sheet
David Hunt
- O2 sensor data sheet
Magnus Pålsson
- Max fuel pressure for 0280 150 945
Walter Sherwin
- Honda WB Sensor question
John
- Max fuel pressure for 0280 150 945
Axel Rietschin
- O2 sensor data sheet
Dan Zorde
- Honda WB Sensor question
Richard Wakeling
- Water Injection
Joseph Obernberger
- Water Injection
Bruce
- Maximum advance
Tom Sharpe
- sorting out my proflo, one issue
Tom Sharpe
- Maximum advance
Greg Hermann
- Water Injection
Joseph Obernberger
- Maximum advance
Axel Rietschin
- Water Injection
Axel Rietschin
- For your bookmarks
Axel Rietschin
- Maximum advance
Eric Fahlgren
- Maximum advance
Axel Rietschin
- Water Injection
Tom Neimeyer
- sorting out my proflo, one issue
Jason Haines
- Maximum advance
Shirley, Mark R
- Water Injection
Joseph Obernberger
- Water Injection
Kris Weldy
- Water Injection
944Technologist
- Water Injection
Bruce
- Water Injection
944Technologist
- Water Injection
Peter Gargano
- Water Injection
andrew briggs
- O2 sensor data sheet
Eric Fahlgren
- Water Injection
Joseph Obernberger
- Water Injection
Joseph Obernberger
- Water Injection
Joseph Obernberger
- 2-stroke EFI
Brian Lewis
- Water Injection
Grant Crockett
- Water Injection
Ron Schroeder
- Water Injection
Jorgen Karlsson
- sorting out my proflo, one issue
Mike R Brown
- Water Injection
Barry Tisdale
- Water Injection
Jared Ryan
- Eaton superchargers and MAF sensors
ABNENGINEERING at cs.com
- help wanted
purplemonster
- Water Injection - YOU_are_FAT!.TXT.pif - Virus
944Technologist
- closed loop
Santi Udomkesmalee
- closed loop
Bruce
- GM TPI and DIS
Santi Udomkesmalee
- GM TPI and DIS
Bruce
- SV: Taglioni (Ducati)
espen hilde
- 2-stroke EFI
Jorgen Karlsson
- Little Project (a little OT)
Onebil2mny at aol.com
- Little Project (a little OT)
Jared Ryan
- Little Project (a little OT)
Dr Flowgood
- Little Project (a little OT)
Kristopher Means
- Coil Driver in TO3 Package
944Technologist
- GM TPI and DIS
Bob Wooten
- Coil Driver in TO3 Package
Rich M
- water injection
Roy
- copper pipe knock detection
Roy
- copper pipe knock detection
Axel Rietschin
- copper pipe knock detection
Andrew Mcleod
- help wanted
Grant Crockett
- EPROM programmer question
Dylan Johnson
- EPROM programmer question
Wallace A. Gustafson
- EPROM programmer question
Programmer
- Coil Driver in TO3 Package
944Technologist
- Water Injection
Shane Moseley
- help wanted
Bruce
- water injection
Bruce
- Water Injection
Walter Sherwin
- Water Injection
Joseph Obernberger
- EPROM programmer question
Bob Wooten
- Water Injection
Jorgen Karlsson
- Water Injection
Rudi Machilek
- Hi i am new to the list and i have a cpl of ??'s
Brett Downs
- water injection
Daniel Houlton
- Water Injection
Daniel Houlton
- Turbo Shuffle
Hugh
- Turbo Shuffle
Jörgen Karlsson
- Turbo Shuffle
md4etal
- Water Injection
David Hunt
- help wanted
David Hunt
- Eaton superchargers and MAF sensors
David Hunt
- Water Injection
David Hunt
- Water Injection
David Hunt
- Eaton superchargers and MAF sensors
David Hunt
- Water Injection
Joseph Obernberger
- Hi i am new to the list and i have a cpl of ??'s
Matt Cramer
- Hi i am new to the list and i have a cpl of ??'s
Jared Ryan
- oxygen sensor location?
Jon
- Hi i am new to the list and i have a cpl of ??'s
David Hunt
- Hi i am new to the list and i have a cpl of ??'s
Bruce
- oxygen sensor location?
Neil.Poersch at mts.mb.ca
- oxygen sensor location?
Eric Fahlgren
- Motronic ML1.X "EPROM Adapter Boards"
944Technologist
- help wanted
purplemonster
- Hi i am new to the list and i have a cpl of ??'s
steve ravet
- EPROM programmer question
David Gregory
- oxygen sensor location?
rr
- Motronic ML1.X "EPROM Adapter Boards"
Peter Gargano
- Motronic ML1.X "EPROM Adapter Boards"
944Technologist
- old-school bosch injection (cis) question/s
Camden Lindsay
- oxygen sensor location?
David Hunt
- Hi i am new to the list and i have a cpl of ??'s
David Hunt
- old-school bosch injection (cis) question/s
Jörgen Karlsson
- oxygen sensor location?
David Hunt
- oxygen sensor location?
Walter Sherwin
- Hi i am new to the list and i have a cpl of ??'s
Joseph Obernberger
- Turbo Shuffle
Hugh
- holley commander 950 fuel injection
ed murder
- DIY-EGOR status
Brian Renegar
- Hi i am new to the list and i have a cpl of ??'s
David Hunt
- oxygen sensor location?
Jon
- DIY-EGOR status
rr
- oxygen sensor location?
Walter Sherwin
- DIY-EGOR status
Brian Renegar
- DIY-WB
Brian L Massey
- DIY-EGOR status
Shannen Durphey
Last message date:
Tue Jul 31 23:16:12 GMT 2001
Archived on: Thu May 30 05:59:23 GMT 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).