intake plenum size?

[Bruce]

Yep, but was just responding to the original guestion
Bruce



From: "David Hunt" <bamainc at home.com>
Subject: Re: intake plenum size?
> Bruce,
> I think you can say that about any engine, not just wankels and not just
> internal combustion and not just....
> dh

> From: "Bruce" nacelp at bright.net
> Subject: Re: intake plenum size?
> > All the hotrod rotaries I've ever seen have used a IR for manifolding,
> It's
> > the best set up there is and easy to apply to a rotary.
> > The peak rpm of a rotary is defined by the depth of your wallet.
> > Bruce

> > From: "peter bengtsson" <peterbeng at hotmail.com>
> > Subject: Re: intake plenum size?
> > > Is there anyone with any experince from wankel engines?
> > > I`ve heard that bigger plenuns makes the engin peak at higher rpm`s
and
> > > smaller at lower.
> > > I`ve got an mazda 12a engine (1.2liters), any ideas in what rpm my
> engine
> > > would peak with a 1.2 liter plenum?
> > > Peter

> > > >From: "Bruce" nacelp at bright.net
> > > >Subject: Re: intake plenum size?
> > > >   More then one cylinder, and not Individual Runners, you'll have a
> > > >plenum.
> > > >Carb'd engines can have a plenum.
> > > >   Hi performance engines about follow that, thou some folks are
having
> > > >luck
> > > >with plenums much larger then that.
> > > >Bruce
> > > >
> > > >From: "Ian Weaver" <ijweaver at adam.com.au>
> > > >Subject: Re: intake plenum size?
> > > > > The volume of a plenum chamber is normally the same as engine
volume
> > > > > ie: 3lt engine = 3lt chamber.
> > > > > Plenum chambers are normally associatedwith injected engines.
> > > > > Ian


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org