Water Injection

[Joseph Obernberger]

I'm using a couple electric pressure switches - one set at 5psi and the other at
10psi of boost.  They each turn on a separate solenoid to control water flow.
Other systems use pressure switches or other electronics to turn on a pump.
<http://josepho.www4.50megs.com/WI/Description.html>

                                        joeo


944Technologist wrote:

> The Edelbrock has a 6 pound switch. A vacuum line connects to the switch
> which turns the pump motor on when you get more than 6 pounds vacuum. They
> had an optional 12 pound switch too. What are you guys using?
>
> FR Wilk

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org